Search NASA⌕ Search

Engineering topics

Kaganovich, Igor D.

Publications and source records attributed to Kaganovich, Igor D..

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Methods for Color Center Preserving Hydrogen‐Termination of Diamond

Abstract Chemical functionalization of diamond surfaces by hydrogen is an important method for controlling the charge state of near‐surface fluorescent color centers, an essential process in fabricating devices such as diamond field‐effect transistors and chemical sensors, and a required first step for realizing families of more complex terminations through subsequent chemical processing. In all these cases, termination is typically achieved using hydrogen plasma sources that can etch or damage the diamond, as well as deposited materials or embedded color centers. This work explores alternative methods for lower‐damage hydrogenation of diamond surfaces, specifically the annealing of diamond samples in high‐purity, non‐explosive mixtures of nitrogen and hydrogen gas, and the exposure of samples to microwave hydrogen plasmas in the absence of intentional stage heating. The effectiveness of these methods are characterized by x‐ray photoelectron spectroscopy (XPS), and comparison of the results to density‐functional modelling of the surface hydrogenation energetics implicates surface oxygen ligands as the primary factor limiting the termination quality of annealed samples. Finally, photoluminescence (PL) spectroscopy is used to verify that both the annealing and reduced sample temperature plasma methods are non‐destructive to near‐surface ensembles of nitrogen‐vacancy (NV) centers, in stark contrast to plasma treatments that use heated sample stages.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unintended gas breakdowns in narrow gaps of advanced plasma sources for semiconductor fabrication industry

Occurrence of unintended gas breakdown in the narrow gaps of plasma processing chambers is one of the critical challenges in developing advanced plasma sources. Here, we present a combined experimental and theoretical study of unintended discharges in the narrow gaps of plasma processing chambers and report significant drop of the gas breakdown voltage in the presence of a background plasma facing the gap. Experimentally measured breakdown voltages decrease in subsequent breakdown events due to wall erosion caused by the discharge. Therefore, preventing and mitigating the first discharge is of paramount importance. An analysis of kinetic simulation results indicates that the charged particle influx from the background plasma in the processing chamber into the gap is responsible for the onset of early breakdown: higher charged particle density within the gap modifies the electric field profile, allowing unintended breakdowns to occur at a significantly reduced threshold voltage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

An uncertainty-aware strategy for plasma mechanism reduction with directed weighted graphs

In this work, we present a framework for the analysis and reduction of plasma mechanisms by means of weighted directed graphs, in which reactions and species are both treated as nodes. The methodology consists of two distinct analyses. The first, which is qualitative, relies on graph spatializations via force-directed algorithms to discover the predominant global patterns in the chemical model. The second ranks the reactions based on their shortest paths' lengths from/to the species of interest and their relative contributions to the power balance. Further, this quantitative investigation enables a strategy for mechanism reduction that is fully automatized, as it does not require any expert knowledge, highly effective, as it generates reduced mechanisms that are highly accurate while relying on a small number of processes, and easily interpretable, as the algorithm justifies the importance of the retained reactions by outputting their related chemical pathways. Additionally, the work proposes a methodology extension that employs ensembles of graphs to improve the robustness of the reduced mechanism to reaction parameter uncertainties. The approach, here tested for steady-state predictions of a plasma system characterizing negative hydrogen ion sources, is general and can be used in a wide variety of applications outside the particular nuclear fusion context demonstrated in this work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Excitation of surface waves in 3D ion beam neutralization

Neutralization of beams with 2D and 3D geometries by the electrons emitted from an external source is studied using particle-in-cell simulations. Our work reveals that the high-energy electrons excite Trivelpiece–Gould (TG) surface waves in the beams with 3D axisymmetric geometries. These high-energy electrons are generated because of a large amplitude electrostatic solitary wave (ESW) that forms near the electron source and has an electric potential amplitude more than three times the electron thermal energy. Here, we also find that surface wave excitation only happens when the beam radius is large enough at the ion source to attract enough electrons that could form the large amplitude ESW. A comparison of the 3D TG surface wave dispersion relation with an expression for 2D surface waves reveals that they become excited in 3D axisymmetric but not in 2D planar beam because of a higher phase speed requirement in the latter case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Kinetic modeling of solitary wave dynamics in a neutralizing ion beam

In this work, we characterize the formation and evolution of electrostatic solitary waves (ESWs) in the space-charge neutralization of ion beams using particle-in-cell simulations. These waves become excited when the electrons emitted from an external filament source initiate a two-stream instability in the beam. We show that such electrostatic waves become excited in both two-dimensional (2D) and three-dimensional (3D) beams with different shapes and sizes. Through a 1D Bernstein–Greene–Kruskal (BGK) analysis of the 2D beam, we find that the non-Maxwellian nature of the beam electrons gives rise to large-sized ESWs that are not predicted by BGK theory since it assumes a Maxwellian electron velocity distribution in the beam. Finally, we show that a 1D BGK theory is inadequate to describe ESWs in 3D beams because of complex electron trajectories.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Excitation of long electrostatic solitary waves in ion beam neutralization process

Unusually long electrostatic solitary waves (ESWs) are discovered in a particle-in-cell simulation study of the process of ion beam neutralization by electron emission from a filament. These ESWs are long because the density perturbation responses to the potential wells created by the ESWs are very small. Notably, the density perturbation is small because the trapped (positive) and untrapped (negative) electron density perturbations nearly compensate each other because of a non-Maxwellian electron velocity distribution in the beam.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Electron Modulational Instability in the Strong Turbulent Regime for an Electron Beam Propagating in a Background Plasma

We study collective processes for an electron beam propagating through a background plasma using simulations and analytical theory. A new regime where the instability of a Langmuir wave packet can grow locally much faster than ion frequency is clearly identified. The key feature of this new regime is an electron modulational instability that rapidly creates a local Langmuir wave packet, which in its turn produces local charge separation and strong ion density perturbations because of the action of the ponderomotive force, such that the beam-plasma wave interaction stops being resonant. Three evolution stages of the process and observed periodic burst features are discussed. In conclusion, different physical regimes in the plasma and beam parameter space are demonstrated for the first time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Simulations of graphite boronization: A molecular dynamics study of amorphization resulting from bombardment

The molecular dynamics code LAMMPS was used to simulate the bombardment of a graphite structure by atomic boron with impact energies ranging from 50–250 eV. The transient structural evolution, penetration depth, and amorphous layer thickness were analyzed. Simulations show that larger impact energies lead to a greater volume of amorphization and penetration of boron, but that the growth rate of the amorphous layer decreases with increasing fluence. Furthermore, the change in surface chemistry of the amorphized structures was studied using the ReaxFF formalism, which found that the amorphization process introduces dangling bonds thus increasing reactivity in the amorphous region.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

DOE Plasma Science Center - Predictive Control of Plasma Kinetics: Multi-Phase and Bounded Systems (Final Report DE-SC0001939)

Low temperature plasmas (LTPs) are the plasmas of electron-volt (eV) physics and eV technologies. LTPs have characteristic electron temperatures of a few eV and fractional ionizations that are typically small. Since LTPs have electron temperatures commensurate with the threshold energies of excited states in neutral atoms and molecules, power transfer from electrons to these atoms and molecules efficiently produces activated species (e.g., radicals, excited states, photons). Acceleration of ions in the sheaths of LTPs to energies of tens to hundreds of eV enable activation of surface modifying processes – sputtering, etching, deposition. With such properties, LTPs are often and beneficially used in technological devices, ranging from etching and deposition in microelectronics and solar cell fabrication, to hardening of surgical instruments. LTPs harbor fundamental science issues that are intellectually challenging and rewarding. At the same time, there are enormous societal benefits that are enabled by LTPs. The entire present-day and future information technology infrastructure owes its very existence to LTPs. Renewable energy sources, such as solar cell arrays, could not be economically produced in the absence of deposition and etching by LTPs. In acknowledgment of the importance of LTPs, the DOE Office of Fusion Energy Sciences supported the Plasma Science Center for Predictive Control of Plasma Kinetics: Multi-Phase and Bounded Systems from August 2009 to July 2021, consisting of an initial 5-year grant, 3 funded extensions and 2 no-cost extensions. This is the final report of the Center in which the productivity of the Center is discussed in terms of publications, impact and personnel. High-lights of the research performed in the Center are provided.

36 MATERIALS SCIENCE↗