Search NASA⌕ Search

Engineering topics

Kainulainen, J.

Publications and source records attributed to Kainulainen, J..

Synthesizing SMOS zero-baselines with Aquarius brightness temperature simulator

The antenna pattern and observation geometry of the SMOS zero-baseline radiometer, which is used as a reference for the SMOS brightness temperature calibration, was applied to Aquarius simulator, which is used as a reference for the Aquarius brightness temperature calibration. In the preliminary analysis, simulations carried out over a three month period show remarkable agreement between the measurements and simulations. This fundamental agreement would indicate that the brightness temperature products of the two missions should be well correlated. Some discrepancies were also found, cause of which seems to be consistent with findings of other studies and can be corrected for.

Kainulainen, J.↗

Synthesizing SMOS Zero-Baselines with Aquarius Brightness Temperature Simulator

SMOS [1] and Aquarius [2] are ESA and NASA missions, respectively, to make L-band measurements from the Low Earth Orbit. SMOS makes passive measurements whereas Aquarius measures both passive and active. SMOS was launched in November 2009 and Aquarius in June 2011.The scientific objectives of the missions are overlapping: both missions aim at mapping the global Sea Surface Salinity (SSS). Additionally, SMOS mission produces soil moisture product (however, Aquarius data will eventually be used for retrieving soil moisture too). The consistency of the brightness temperature observations made by the two instruments is essential for long-term studies of SSS and soil moisture. For resolving the consistency, the calibration of the instruments is the key. The basis of the SMOS brightness temperature level is the measurements performed with the so-called zero-baselines [3]; SMOS employs an interferometric measurement technique which forms a brightness temperature image from several baselines constructed by combination of multiple receivers in an array; zero-length baseline defines the overall brightness temperature level. The basis of the Aquarius brightness temperature level is resolved from the brightness temperature simulator combined with ancillary data such as antenna patterns and environmental models [4]. Consistency between the SMOS zero-baseline measurements and the simulator output would provide a robust basis for establishing the overall comparability of the missions.

Colliander, A.↗