Search NASA⌕ Search

Engineering topics

Kalapos, Thomas L.

Publications and source records attributed to Kalapos, Thomas L..

Multiphysics modeling of SOFC performance degradation caused by interface delamination and active layer cracking

In solid oxide device operation, delamination and cracking cause more catastrophic damage to cell life than other degradation mechanisms, leading to more rapid cell failure. The electrochemical performance degradation caused by electrode/electrolyte interface delamination and active layer cracking were investigated through in-house developed three-dimensional multiphysics simulations. Here the multiphysics simulations, fully calibrated against experimental datasets for button cells in a previous study, were extended to quantitatively investigate the effects of electrode/electrolyte interface delamination and active layer cracking. The simulated polarization curves and impedance behavior with various levels of delamination and cracking provided insights of the performance degradation. Furthermore, the local current distributions within the cell were analyzed for three different operating modes: constant voltage, constant current, and constant power. Finally, a practical strategy was proposed to mitigate the performance degradation in the realistic cell operations, extending overall cell lifetime.

08 HYDROGEN↗

Layer-structured triple-conducting electrocatalyst for water-splitting in protonic ceramic electrolysis cells: Conductivities vs. activity

Electron, proton and oxygen-triple-conducting materials are becoming the dominant steam electrode candidate to break the rate limit on the water-splitting reaction that throttles the performance of protonic ceramic electrolysis cells (PCECs). In this study, based on Pr 2 NiO 4+δ Ruddlesden-Popper phase, we manipulate these conductivities by Pr-site Ba substitution to probe the correlation of each conductivity with the kinetics of the elementary reaction steps. It is found that the proton conductivity is vital to sustain an extended active surface area for faster adsorption of reactants and desorption of products. The effect of oxygen conductivity is surprisingly found insignificant in the water-splitting reaction. On the contrary, surface oxygen removal is discovered as the most rate-limiting process. The electronic conductivity is not a direct limiting factor. However, an electron transfer process between the current collector and the electrode junction could introduce extra resistance that is perceptible at a high operating temperature range. The best water-splitting activity is obtained on a proton conductivity/oxygen surface desorption capability well-balanced sample after Ba substitution. As a result, a water-splitting reaction resistance of 0.022 Ωcm 2 , a current density of 1.96 A/cm 2 at 700 °C is achieved on Pr 1.7 Ba 0.3 NiO 4+δ , one of the best performances for PCECs.

25 ENERGY STORAGE↗

Deconvolution of Water-Splitting on the Triple-Conducting Ruddlesden–Popper-Phase Anode for Protonic Ceramic Electrolysis Cells

Triple-conducting materials have been proved to improve the performance of popular protonic ceramic electrolysis cells. However, partially because of the complexity of the water splitting reaction involving three charge carriers, that is, oxygen (O 2– ), proton (H + ), and electron (e – ), the triple-conducting reaction mechanism was not clear, and the reaction conducting pathways have seldom been addressed. In this study, the triple conducting Ruddlesden–Popper phase Pr 1.75 Ba 0.25 NiO 4+δ as an anode on the BaCe 0.7 Zr 0.1 Y 0.1 Yb 0.1 O 3–δ electrolyte was fabricated and its electroresponses were characterized by electrochemical impedance spectroscopy with various atmospheres and temperatures. The impedance spectra are deconvoluted by means of the distribution of the relaxation time method. The surface exchange rate and chemical diffusivity of H + and O 2– are characterized by electrical conductivity relaxation. The physical locations of electrochemical processes are also identified by atomic layer deposition with a surface inhibitor. A microkinetics model is proposed toward conductivities, triple-conducting pathways, reactant dependency, surface exchange and bulk diffusion capabilities, and other relevant properties. Lastly, the rate-limiting steps and suggestions for further improvement of electrode performance are presented.

25 ENERGY STORAGE↗

Investigation of LSM-YSZ Composite Cathode Performance Degradation with a Multistep Charge Transfer Model

The long-term performance degradation of LSM/YSZ composite cathodes is investigated via calibrated multiphysics simulation with a multistep oxygen reduction reaction (ORR) model and structural coarsening data from a phase field study. Multiphysics simulations, including a multistep ORR mechanism, are first developed for better understanding of the limiting processes in solid oxide fuel cells. The multistep ORR mechanism includes two parallel pathways, surface pathway and bulk pathway, which consist of elementary reaction steps. The multiphysics model is simultaneously calibrated with experimental polarization curves and impedance behavior for various air/fuel supply conditions. To our knowledge, this is the first time that a multistep ORR model is calibrated with such datasets. Next, the calibrated simulations are utilized to simulate a 2D half-cell constructed with measured microstructural data and random heterogeneity. Finally, the long-term performance degradation of the half-cell is predicted by the calibrated multiphysics model coupled with structural coarsening trends simulated using a phase field-based coarsening model. Degradation of both polarization curves and impedance behavior is investigated. Thorough analyses, including changes of contributions from different pathways, the resistance components, and overall reaction order, are performed to provide more insights into cathode performance degradation due to grain coarsening phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plasmonic Conducting Metal Oxide-Based Optical Fiber Sensors for Chemical and Intermediate Temperature-Sensing Applications

The demand for real-time sensors in harsh environments at elevated temperature is significant and increasing. In this manuscript, the chemical and temperature sensing using the optical response through the practical fiber platform is demonstrated, and principle component analysis is coupled with targeted experimental film characterization to understand the fundamental sensing layer properties, which dominate measured gas sensing responses in complex gas mixtures. More specifically, tin-doped indium oxide-decorated sensors fabricated with the sol–gel method show stable and stepwise transmission responses varying over a wide range of H2 concentration (5–100%) at 250–350 °C as well as responses to CH4 and CO to a lesser extent. Measured responses are attributed to modifications to the surface plasmon resonance absorption in the near-infrared range and are dominated by the highest concentrations of the most-reducing analyte based upon systematic mixed gas stream experiments. Principal component analysis is utilized for this type of sensor to improve the quantitative and qualitative understanding of responses, clearly identifying that the dominant principle component (PC #1) accounts for ~78% of total data variance. Correlations between PC #1 and the experimentally derived free carrier concentration confirm that this material property plays the strongest role on the ITO gas sensing mechanism, while correlations between the free carrier mobility and the second most important principle component (PC #2) suggest that this quantity may play a significant but secondary role. As such, the results presented here clarify the relationship between generalized principle components and fundamental sensing materials properties thereby suggesting the pathway toward improved multicomponent gas speciation through sensor layer engineering. Furthermore, the work presented represents a significant step toward the ultimate objective of optical waveguide sensors integrated with multivariate data analytics for multiparameter monitoring with a single sensor element.

47 OTHER INSTRUMENTATION↗