Engineering topics
Publications and source records attributed to Kanber, H..
Sound waves are utilized to apply torque to a body in an enclosure of square cross section, by driving two transducers located on perpendicular walls of an enclosure, at the same frequency but at a predetermined phase difference such as 90 degrees. The torque is a first order effect, so that large and controlled rotational speeds can be obtained.
The observation of a fourth-order acoustic torque in intense sound fields is reported. The torque was determined by measuring the acoustically induced angular deflection of a polished cylinder suspended by a torsion fiber. This torque was measured in a sound field of amplitude greater than that in which first-order acoustic torque has been observed.
The letter reports an observation of first-order nonzero time-averaged torques and solid-body spinning velocities in intense acoustic fields. The experimental apparatus consisted of a vertical cylindrical rod supported on an air bearing and passing through a box with two loudspeakers centered on adjoining vertical sides. The rim velocity of the cylinder and the torque on the cylinder are measured as functions of air-particle velocity and the phase difference between the x and y components of the particle velocity. It is found that both rim velocity and torque are linear functions of particle velocity. Difficulties in constructing a proper theoretical description of the observed effects are discussed.