Search NASA⌕ Search

Engineering topics

Kandil, O. A.

Publications and source records attributed to Kandil, O. A..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Effects of Wall Cooling on Hypersonic Boundary Layer Receptivity Over a Cone

Effects of wall cooling on the receptivity process induced by the interaction of slow acoustic disturbances in the free-stream are numerically investigated for a boundary layer flow over a 5-degrees straight cone. The free-stream Mach number is 6.0 and the Reynolds number is 7.8x10(exp 6)/ft. Both the steady and unsteady solutions are obtained by solving the full Navier-Stokes equations using 5th-order accurate weighted essentially non-oscillatory (WENO) scheme for space discretization and using 3rd-order total variation diminishing (T VD) Runge-K utta scheme for time integration. Computations are performed for a cone with nose radius of 0.001 inch for adiabatic wall temperature (T(sub aw)), 0.75*T(sub aw), 0.5*T(sub aw), 0.40*T(sub aw), 0.30*T(sub aw), and 0.20*T(sub aw). Once the mean flow field is computed, disturbances are introduced at the upstream end of the computational domain. Generation of instability waves from leading edge region and receptivity of boundary layer to slow acoustic waves are investigated. Computations showed that wall cooling has strong stabilization effect on the first mode disturbances as was observed in the experiments. T ransition location moved to upstream when wall cooling was applied It is also found that the boundary layer is much more receptive to fast acoustic wave (by almost a factor of 50). When simulations performed using the same forcing frequency growth of the second mode disturbances are delayed with wall cooling and they attained values two times higher than that of adiabatic case. In 0.20*T(sub aw) case the transition Reynolds number is doubled compared to adiabatic conditions. The receptivity coefficient for adiabatic wall case (804 R) is 1.5225 and for highly cooled cones (241, and 161 R); they are in the order of 10(exp -3).

Kara, K.↗
NASA NTRS2007

Effects of Nose Bluntness on Stability of Hypersonic Boundary Layers over Blunt Cone

Receptivity and stability of hypersonic boundary layers are numerically investigated for boundary layer flows over a 5-degree straight cone at a free-stream Mach number of 6.0. To compute the shock and the interaction of shock with the instability waves, we solve the Navier-Stokes equations in axisymmetric coordinates. The governing equations are solved using the 5th-order accurate weighted essentially non-oscillatory (WENO) scheme for space discretization and using third-order total-variation-diminishing (TVD) Runge-Kutta scheme for time integration. After the mean flow field is computed, disturbances are introduced at the upstream end of the computational domain. Generation of instability waves from leading edge region and receptivity of boundary layer to slow acoustic waves are investigated. Computations are performed for a cone with nose radii of 0.001, 0.05 and 0.10 inches that give Reynolds numbers based on the nose radii ranging from 650 to 130,000. The linear stability results showed that the bluntness has a strong stabilizing effect on the stability of axisymmetric boundary layers. The transition Reynolds number for a cone with the nose Reynolds number of 65,000 is increased by a factor of 1.82 compared to that for a sharp cone. The receptivity coefficient for a sharp cone is about 4.23 and it is very small, approx.10(exp -3), for large bluntness.

Kara, K.↗
NASA NTRS2007

Receptivity of Hypersonic Boundary Layers Due to Acoustic Disturbances over Blunt Cone

The transition process induced by the interaction of acoustic disturbances in the free-stream with boundary layers over a 5-degree straight cone and a wedge with blunt tips is numerically investigated at a free-stream Mach number of 6.0. To compute the shock and the interaction of shock with the instability waves the Navier-Stokes equations are solved in axisymmetric coordinates. The governing equations are solved using the 5th -order accurate weighted essentially non-oscillatory (WENO) scheme for space discretization and using third-order total-variation-diminishing (TVD) Runge-Kutta scheme for time integration. After the mean flow field is computed, acoustic disturbances are introduced at the outer boundary of the computational domain and unsteady simulations are performed. Generation and evolution of instability waves and the receptivity of boundary layer to slow and fast acoustic waves are investigated. The mean flow data are compared with the experimental results. The results show that the instability waves are generated near the leading edge and the non-parallel effects are stronger near the nose region for the flow over the cone than that over a wedge. It is also found that the boundary layer is much more receptive to slow acoustic wave (by almost a factor of 67) as compared to the fast wave.

Kara, K.↗
NASA NTRS1993

Numerical simulation and physical aspects of supersonic vortex breakdown

Existing numerical simulations and physical aspects of subsonic and supersonic vortex-breakdown modes are reviewed. The solution to the problem of supersonic vortex breakdown is emphasized in this paper and carried out with the full Navier-Stokes equations for compressible flows. Numerical simulations of vortex-breakdown modes are presented in bounded and unbounded domains. The effects of different types of downstream-exit boundary conditions are studied and discussed.

Liu, C. H.↗
NASA NTRS1991

Thin-layer and full Navier-Stokes, locally-conical and three-dimensional asymmetric solutions

The unsteady, compressible thin-layer and full Navier-Stokes equations are used to numerically simulate steady and unsteady asymmetric, supersonic, locally-conical flows around a 5-deg-semiapex angle circular cone. The main computational scheme used for the present computations is the implicit, upwind, flux-difference splitting, finite-volume scheme. Comparisons of the solutions using the two sets of equations are presented for the flow asymmetry and its control. Computational studies are also presented to investigate the effects of the freestream Reynolds number and the locally-scaled Reynolds number on the flow asymmetry. These studies are carried out using the full Navier-Stokes equations. Three-dimensional, asymmetric flow solutions are also presented for a 5-deg-semiapex angle cone of unit length and a cone-cylinder configuration. The three-dimensional solutions are obtained by using the thin-layer equations and short-duration transient side-slip disturbances along with a very fine grid.

Kandil, O. A.↗
NASA NTRS1990

Numerical simulation of steady and unsteady asymmetric vortical flow

The unsteady, compressible, thin-layer, Navier-Stokes equations are solved to simulate steady and unsteady, asymmetric, vortical laminar flow around cones at high incidences and supersonic Mach numbers. The equations are solved by using an implicit, upwind, flux-difference splitting, finite-volume scheme. Locally conical flows are assumed and the solutions are obtained by forcing the conserved components of the flowfield vector to be equal at two axial stations located at 0.95 and 1.0. Computational examples cover steady and unsteady asymmetric flows around a circular cone and its control using side strakes. Unsteady asymmetric flows are also presented for elliptic- and diamond-section cones, which model asymmetric vortex shedding around round and sharp-edged delta wing flows.

Kandil, O. A.↗
NASA NTRS1988

Separation-bubble flow solution using Euler/Navier-Stokes zonal approach with downstream compatibility conditions

The two-dimensional flow over a blunt leading-edge plate is simulated on the basis of an Euler/Navier-Stokes zonal scheme. The scheme uses an implicit upwind finite-volume scheme, which is based on the van Leer flux-vector splitting. It is shown that the Euler/Navier-Stokes zonal scheme with downstream boundary-layer compatibility conditions is accurate and efficient.

Liu, C. H.↗
NASA NTRS1988

Unsteady transonic airfoil computation using the integral solution of full-potential equation

The shock-capturing integral-equation scheme developed by Kandil and Hu (1987) for the analysis of steady transonic flow over airfoils is extended to the unsteady case. The full potential formulation of the governing equations is reviewed; the solution method is outlined; and results for a NACA 0012 airfoil in forced pitching oscillation at Mach 0.755 are presented in extensive graphs and briefly characterized. The present technique is shown to require significantly less computation time than finite-difference or finite-volume methods, and to give shock-motion predictions in good agreement with those of an implicit finite-volume Euler solver; the surface-pressure peaks are slightly underpredicted.

Kandil, O. A.↗
NASA NTRS1986

Influence of numerical dissipation in computing supersonic vortex-dominated flows

Steady supersonic vortex-dominated flows are solved using the unsteady Euler equations for conical and three-dimensional flows around sharp- and round-edged delta wings. The computational method is a finite-volume scheme which uses a four-stage Runge-Kutta time stepping with explicit second- and fourth-order dissipation terms. The grid is generated by a modified Joukowski transformation. The steady flow solution is obtained through time-stepping with initial conditions corresponding to the freestream conditions, and the bow shock is captured as a part of the solution. The scheme is applied to flat-plate and elliptic-section wings with a leading edge sweep of 70 deg at an angle of attack of 10 deg and a freestream Mach number of 2.0. Three grid sizes of 29 x 39, 65 x 65 and 100 x 100 have been used. The results for sharp-edged wings show that they are consistent with all grid sizes and variation of the artificial viscosity coefficients. The results for round-edged wings show that separated and attached flow solutions can be obtained by varying the artificial viscosity coefficients. They also show that the solutions are independent of the way time stepping is done. Local time-stepping and global minimum time-steeping produce same solutions.

Kandil, O. A.↗
NASA NTRS1986

Finite-volume and integral-equation techniques for transonic and supersonic vortex-dominated flows

Two computational techniques are developed to calculate the compressible vortex-dominated flows. The first technique is a finite-volume Euler Solver which uses four-Stage Runge-Kutta time stepping with second- and fourth-order dissipation terms. The technique is applied to supersonic conical and three-dimensional flows about sharp- and round-edged delta wings. Attached and separated-flow solutions have been obtained depending on the values of damping coefficients. The second technique is an integral-equation solver of the full potential equation which uses a volume-integral term in addition to the classical surface-integral terms. The technique is applied to transonic three-dimensional flows about sharp-edged delta wings. A hybrid technique which combines the finite-volume and the integral-equation solvers is also presented.

Kandil, O. A.↗
NASA NTRS1985

Computation of transonic vortex flows past delta wings Integral equation approach

The steady full-potential equation is written in the form of Poisson's equation, and the solution of the velocity field is expressed in terms of an integral equation. The solution consists of a surface integral of vorticity distribution on the wing and its free-vortex sheets and a volume integral of source distribution within a volume around the wing and its free-vortex sheets. The solution is obtained through successive iteration cycles. The source distribution is computed by using a mixed finite-difference scheme of the Murman-Cole type. The method is applied to delta wings. Numerical examples show that a conical shock is captured on the suction side of the wing. It is attached to the lower surface of the leading-edge vortex but does not necessarily reach to the wing surface.

Kandil, O. A.↗
NASA NTRS1985

Steady and unsteady incompressible free-wake analysis

The flows around highly sweptback wings and bodies of revolution at high angle of attack are described, and inviscid model approximations and mathematical formulation of the problem are given to steady and unsteady incompressible flows. A general presentation of the methods of solution is given, with emphasis on current computational techniques. Detailed descriptions of the nonlinear vortex-lattice and vortex-panel techniques are presented to show how the boundary conditions are enforced using iteration. Typical numerical results are compared with the available experimental data.

Kandil, O. A.↗
NASA NTRS1983

Computational technique for three-dimensional compressible flow past wings at high angles of attack

A computational technique, based on the integral solution of the full potential equation, has been developed for the solution of three-dimensional high-subsonic flows past wings at high angles of attack. The problem includes two sources of nonlinearities: a boundary oriented nonlinearity (separated flow roll up) and a region oriented nonlinearity (flow compressibility). The former is represented by a nonlinear vortex lattice while the latter is represented by a source distribution inside a finite volume. The solution is obtained by using double iteration cycles; a separated flow (wake) iteration cycle and a compressibility iteration cycle. The computational technique is applied to a delta wing. The results show that the technique is very promising and efficient.

Kandil, O. A.↗
NASA NTRS1982

Development of a nonlinear vortex method

Steady and unsteady Nonliner Hybrid Vortex (NHV) method, for low aspect ratio wings at large angles of attack, is developed. The method uses vortex panels with first-order vorticity distribution (equivalent to second-order doublet distribution) to calculate the induced velocity in the near field using closed form expressions. In the far field, the distributed vorticity is reduced to concentrated vortex lines and the simpler Biot-Savart's law is employed. The method is applied to rectangular wings in steady and unsteady flows without any restriction on the order of magnitude of the disturbances in the flow field. The numerical results show that the method accurately predicts the distributed aerodynamic loads and that it is of acceptable computational efficiency.

Kandil, O. A.↗
NASA NTRS1982

Applications of perturbation techniques

Two perturbation techniques were applied to two singular perturbation problems in heat transfer to obtain uniformly valid solutions which can serve as benchmarks for finite difference and finite element techniques. In the first problem, the method of strained parameters coupled with the application of a solvability condition is used to obtain a uniform solution for the problem of unsteady heat conduction in a long nearly circular cylinder. In the second problem, the method of matched asymptotic expansion coupled with Van Dyke's matching principle is used to obtain a uniform solution for the problem of one dimensional conduction-convection heat transfer of a uniform fluid flow.

Kandil, O. A.↗
NASA NTRS1982

Steady and unsteady nonlinear hybrid vortex method for lifting surfaces at large angles of attack

Steady and unsteady Nonlinear Hybrid Vortex (NHV) method, for low aspect ratio wings at large angles of attack, is developed. The method uses vortex panels with first-order vorticity distribution (equivalent to second-order doublet distribution) to calculate the induced velocity in the near field using closed form expressions. In the far field, the distributed vorticity is reduced to concentrated vortex lines and the simpler Biot-Savart's law is employed. The method is applied to rectangular wings in steady and unsteady flows without any restriction on the order of magnitude of the disturbances in the flow field. The numerical results show that the method accurately predicts the distributed aerodynamic loads and that it is of acceptable computational efficiency.

Kandil, O. A.↗