Search NASA⌕ Search

Engineering topics

Kannan, Baskaran

Publications and source records attributed to Kannan, Baskaran.

13 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Greater aperture counteracts effects of reduced stomatal density on WUE: a case study on sugarcane and meta-analysis

Stomata regulate CO 2 and water vapor exchange between leaves and the atmosphere. Stomata are a target for engineering to improve crop intrinsic water use efficiency (iWUE). One example is by expressing genes that lower stomatal density (SD) and reduce stomatal conductance (g sw ). However, the quantitative relationship between reduced SD, g sw , and the mechanisms underlying it is poorly understood. We addressed this knowledge gap using low-SD sugarcane (Saccharum spp. hybrid) as a case study alongside a meta-analysis of data from 10 species. Transgenic expression of EPIDERMAL PATTERNING FACTOR 2 from Sorghum bicolor (SbEFP2) in sugarcane reduced SD by 26-38% but did not affect gsw compared to wildtype. Further, no changes occurred in stomatal complex size or proxies for photosynthetic capacity. Measurements of gas exchange at low CO 2 concentrations that promote complete stomatal opening to normalize aperture size between genotypes were combined with modeling of maximum gsw from anatomical data. These data suggest that increased stomatal aperture is the only possible explanation for maintaining gsw when SD is reduced. Meta-analysis across C 3 dicots, C 3 monocots, and C 4 monocots revealed engineered reductions in SD are strongly correlated with lower gsw (r 2 =0.60-0.98), but this response is damped relative to the change in anatomy.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

The extent of multiallelic, co‐editing of LIGULELESS1 in highly polyploid sugarcane tunes leaf inclination angle and enables selection of the ideotype for biomass yield

Summary Sugarcane ( Saccharum spp. hybrid) is a prime feedstock for commercial production of biofuel and table sugar. Optimizing canopy architecture for improved light capture has great potential for elevating biomass yield. LIGULELESS1 ( LG1 ) is involved in leaf ligule and auricle development in grasses. Here, we report CRISPR/Cas9‐mediated co‐mutagenesis of up to 40 copies/alleles of the putative LG1 in highly polyploid sugarcane (2 n = 100–120, x = 10–12). Next generation sequencing revealed co‐editing frequencies of 7.4%–100% of the LG1 reads in 16 of the 78 transgenic lines. LG1 mutations resulted in a tuneable leaf angle phenotype that became more upright as co‐editing frequency increased. Three lines with loss of function frequencies of ~12%, ~53% and ~95% of lg1 were selected following a randomized greenhouse trial and grown in replicated, multi‐row field plots. The co‐edited LG1 mutations were stably maintained in vegetative progenies and the extent of co‐editing remained constant in field tested lines L26 and L35. Next generation sequencing confirmed the absence of potential off targets. The leaf inclination angle corresponded to light transmission into the canopy and tiller number. Line L35 displaying loss of function in ~12% of the lg1 NGS reads exhibited an 18% increase in dry biomass yield supported by a 56% decrease in leaf inclination angle, a 31% increase in tiller number, and a 25% increase in internode number. The scalable co‐editing of LG1 in highly polyploid sugarcane allows fine‐tuning of leaf inclination angle, enabling the selection of the ideotype for biomass yield.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Data for Sustainable Co-Production of Plant Lipids and Cellulosic Sugars from Transgenic Energycane at an Industrially Relevant Scale: A Proof of Concept for Alternative Feedstocks

Development of sustainable and scalable technologies to convert lignocellulosic biomass to biofuels is critical to achieving carbon neutrality. The potential of transgenic bioenergy crops as a renewable source of sugars and lipids has been demonstrated at bench-scale. However, scaling up these processes is important for holistic analysis. Here proof-of-concept for chemical-free hydrothermal pretreatment of transgenic energycane-oilcane line L13 at an industrially relevant scale to recover vegetative lipids along with cellulosic sugars is presented. Pilot-scale processing of 97 kg of transgenic energycane-oilcane L13 stems and high solids pretreatment of bagasse enhanced the recovery of cellulosic glucose and xylose by 5-fold as compared to untreated bagasse and helped in the enrichment of vegetative lipids in the biomass residues which allowed its recovery at the end of the bioprocess. Palmitic and oleic acids were the predominant fatty acids (FAs) extracted from stems and leaves. The processing did not affect lipid composition. The efficiency of lipid recovery from untreated biomass was 75.9% which improved to 88.7% upon pretreatment. The vegetative tissues of transgenic energycane-oilcane L13 contained 0.42 metric tons/hectare of lipids. Processing vegetative tissues yielded 0.38 metric tons/hectare of lipids. This approaches an oil yield similar to soybean (global average 0.44 metric tons/hectare) and is almost twice as high as the oil yield from sugarcane engineered to hyperaccumulate lipids (0.20 metric tons/hectare). The study suggests that further optimization by state-of-the-art metabolic engineering and biomass processing can establish transgenic bioenergy crops for commercial drop-in fuel production.

Biomass Analytics↗
DOE OSTI2024

Sustainable co-production of plant lipids and cellulosic sugars from transgenic energycane at an industrially relevant scale: A proof of concept for alternative feedstocks

Development of sustainable and scalable technologies to convert lignocellulosic biomass to biofuels is critical to achieving carbon neutrality. The potential of transgenic bioenergy crops as a renewable source of sugars and lipids has been demonstrated at bench-scale. However, scaling up these processes is important for holistic analysis. Here proof-of-concept for chemical-free hydrothermal pretreatment of transgenic energycane-oilcane line L13 at an industrially relevant scale to recover vegetative lipids along with cellulosic sugars is presented. Here, pilot-scale processing of 97 kg of transgenic energycane-oilcane L13 stems and high solids pretreatment of bagasse enhanced the recovery of cellulosic glucose and xylose by 5-fold as compared to untreated bagasse and helped in the enrichment of vegetative lipids in the biomass residues which allowed its recovery at the end of the bioprocess. Palmitic and oleic acids were the predominant fatty acids (FAs) extracted from stems and leaves. The processing did not affect lipid composition. The efficiency of lipid recovery from untreated biomass was 75.9% which improved to 88.7% upon pretreatment. The vegetative tissues of transgenic energycane-oilcane L13 contained 0.42 metric tons/hectare of lipids. Processing vegetative tissues yielded 0.38 metric tons/hectare of lipids. This approaches an oil yield similar to soybean (global average 0.44 metric tons/hectare) and is almost twice as high as the oil yield from sugarcane engineered to hyperaccumulate lipids (0.20 metric tons/hectare). The study suggests that further optimization by state-of-the-art metabolic engineering and biomass processing can establish transgenic bioenergy crops for commercial drop-in fuel production.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Triacylglycerol, total fatty acid, and biomass accumulation of metabolically engineered energycane grown under field conditions confirms its potential as feedstock for drop‐in fuel production

Abstract Metabolic engineering for hyperaccumulation of lipids in vegetative tissues of high biomass crops promises a step change in oil yields for the production of advanced biofuels. Energycane is the ideal feedstock for this approach due to its exceptional biomass production and persistence under marginal conditions. Here, we evaluated metabolically engineered energycane with constitutive expression of the lipogenic factors WRINKLED 1 ( WRI 1), DIACYLGLYCEROL ACYLTRANSFERASE 1 ( DGAT 1), and OLEOSIN 1 ( OLE 1) for the accumulation of triacylglycerol (TAG), total fatty acid (TFA), and biomass under field conditions at the University of Florida‐IFAS experiment station near Citra, Florida. TAG and TFA accumulation were highest in leaves (up to 9.9% and 12.9% of DW, respectively), followed by juice from crushed stems, stems, and roots. TAG and TFA accumulation increased up to harvest time and correlated highest with OLE 1 and DGAT 1 expression. Biomass dry weight, TAG, and TFA content differed greatly depending on DGAT 1 and OLE 1 expression in transgenic lines with similar WRI 1 expression. Biomass did not significantly differ between WT and line L2 with DAGT 1 and OLE 1 expressed at low levels and TAG and TFA accumulating to 12‐ and 1.6‐fold that of WT leaves, respectively. In contrast, line L13, with intron‐mediated enhancement of DGAT 1 expression, displayed a 245‐ to 330‐fold increase in TAG and a 4.75‐ to 6.45‐fold increase in TFA content compared with WT leaves and a biomass reduction of 52%. These results provide the basis for developing novel feedstocks for expanding plant lipid production and point to new prospects for advanced biofuels.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Raw data for publication: Cao et al. 2023. GCB-Bioenergy (accepted for publication).

Raw data for publication: Viet Dang Cao, Baskaran Kannan, Guangbin Luo, Hui Liu, John Shanklin, and Fredy Altpeter. 2023. Triacylglycerol, total fatty acid and biomass accumulation of metabolically engineered energycane grown under field conditions. GCB-Bioenergy (accepted for publication).

Bioenergy, energycane, lipids, biodiesel, biofuel,↗
DOE OSTI2023

Microbiome differences in sugarcane and metabolically engineered oilcane accessions and their implications for bioenergy production

Abstract Oilcane is a metabolically engineered sugarcane ( Saccharum spp. hybrid) that hyper-accumulates lipids in its vegetable biomass to provide an advanced feedstock for biodiesel production. The potential impact of hyper-accumulation of lipids in vegetable biomass on microbiomes and the consequences of altered microbiomes on plant growth and lipid accumulation have not been explored so far. Here, we explore differences in the microbiome structure of different oilcane accessions and non-modified sugarcane. 16S SSU rRNA and ITS rRNA amplicon sequencing were performed to compare the characteristics of the microbiome structure from different plant compartments (leaf, stem, root, rhizosphere, and bulk soil) of four greenhouse-grown oilcane accessions and non-modified sugarcane. Significant differences were only observed in the bacterial microbiomes. In leaf and stem microbiomes, more than 90% of the entire microbiome of non-modified sugarcane and oilcane was dominated by similar core taxa. Taxa associated with Proteobacteria led to differences in the non-modified sugarcane and oilcane microbiome structure. While differences were observed between multiple accessions, accession 1566 was notable in that it was consistently observed to differ in its microbial membership than other accessions and had the lowest abundance of taxa associated with plant-growth-promoting bacteria. Accession 1566 is also unique among oilcane accessions in that it has the highest constitutive expression of the WRI 1 transgene. The WRI 1 transcription factor is known to contribute to significant changes in the global gene expression profile, impacting plant fatty acid biosynthesis and photomorphogenesis. This study reveals for the first time that genetically modified oilcanes associate with distinct microbiomes. Our findings suggest potential relationships between core taxa, biomass yield, and TAG in oilcane accessions and support further research on the relationship between plant genotypes and their microbiomes.

09 BIOMASS FUELS↗
DOE OSTI2022

Bioprocessing, Recovery, and Mass Balance of Vegetative Lipids from Metabolically Engineered “Oilcane” Demonstrates Its Potential as an Alternative Feedstock for Drop-In Fuel Production

Plant oils are increasingly in demand as renewable feedstocks for biodiesel and biochemicals. Currently, oilseeds are the primary source of plant oils. Although the vegetative tissues of plants express lipid metabolism pathways, they do not hyper- accumulate lipids. Elevated synthesis, storage, and accumulation of lipids in vegetative tissues have been achieved by metabolic engineering of sugarcane to produce “oilcane”. This study evaluates the potential of oilcane as a renewable feedstock for the co- production of lipids and fermentable sugars. Oilcane was grown under favorable climatic and field conditions in Florida (FLOC) as well as during an abbreviated growing season, outside its typical growing region, in Illinois (ILOC). The potential lipid yield of 0.35 tons/ha was projected from the hyperaccumulation of fatty acids in the stored vegetative biomass of FLOC, which is approaching the lipid yield of soybean (0.44 tons/ha). Processing of the vegetative tissues of oilcane recovered 0.20 tons/ha, which represents the recovery of 55% of the total lipids from FLOC. Chemical-free hydrothermal bioprocessing of ILOC and FLOC bagasse and leaves at 180 °C for 10 min prevented the degeneration of in situ plant lipids. Here, this allowed the recovery of lipids at the end of the bioprocess with a major fraction of lipids remaining in the biomass residues after pretreatment and saccharification. Improvements through refined biomass processing, crop management, and metabolic engineering are expected to boost lipid yields and make oilcane a prime feedstock for the production of biodiesel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Data for Bioprocessing, Recovery, and Mass Balance of Vegetative Lipids from Metabolically Engineered ‘Oilcane’ Demonstrates Its Potential as an Alternative Feedstock for Drop-In Fuel Production

Plant oils are increasingly in demand as renewable feedstocks for biodiesel and biochemicals. Currently, oilseeds are the primary source of plant oils. Although the vegetative tissues of plants express lipid metabolism pathways, they do not hyper-accumulate lipids. Elevated synthesis, storage, and accumulation of lipids in vegetative tissues have been achieved by metabolic engineering of sugarcane to produce “oilcane.” This study evaluates the potential of oilcane as a renewable feedstock for the co-production of lipids and fermentable sugars. Oilcane was grown under favorable climatic and field conditions in Florida (FLOC) as well as during an abbreviated growing season, outside its typical growing region, in Illinois (ILOC). The potential lipid yield of 0.35 tons/ha was projected from the hyperaccumulation of fatty acids in the stored vegetative biomass of FLOC, which is approaching the lipid yield of soybean (0.44 tons/ha). Processing of the vegetative tissues of oilcane recovered 0.20 tons/ha, which represents the recovery of 55% of the total lipids from FLOC. Chemical-free hydrothermal bioprocessing of ILOC and FLOC bagasse and leaves at 180 °C for 10 min prevented the degeneration of in situ plant lipids. This allowed the recovery of lipids at the end of the bioprocess with a major fraction of lipids remaining in the biomass residues after pretreatment and saccharification. Improvements through refined biomass processing, crop management, and metabolic engineering are expected to boost lipid yields and make oilcane a prime feedstock for the production of biodiesel.

Conversion↗
DOE OSTI2022

Metabolic engineering of energycane to hyperaccumulate lipids in vegetative biomass

Abstract Background The metabolic engineering of high-biomass crops for lipid production in their vegetative biomass has recently been proposed as a strategy to elevate energy density and lipid yields for biodiesel production. Energycane and sugarcane are highly polyploid, interspecific hybrids between Saccharum officinarum and Saccharum spontaneum that differ in the amount of ancestral contribution to their genomes. This results in greater biomass yield and persistence in energycane, which makes it the preferred target crop for biofuel production. Results Here, we report on the hyperaccumulation of triacylglycerol (TAG) in energycane following the overexpression of the lipogenic factors Diacylglycerol acyltransferase 1-2 ( DGAT 1-2) and Oleosin 1 ( OLE 1) in combination with RNAi suppression of SUGAR-DEPENDENT 1 ( SDP 1) and Trigalactosyl diacylglycerol 1 ( TGD 1). TAG accumulated up to 1.52% of leaf dry weight (DW,) a rate that was 30-fold that of non-modified energycane, in addition to almost doubling the total fatty acid content in leaves to 4.42% of its DW. Pearson’s correlation analysis showed that the accumulation of TAG had the highest correlation with the expression level of ZmDGAT 1-2, followed by the level of RNAi suppression for SDP 1. Conclusions This is the first report on the metabolic engineering of energycane and demonstrates that this resilient, high-biomass crop is an excellent target for the further optimization of the production of lipids from vegetative tissues.

1-2↗
DOE OSTI2020

Towards oilcane: Engineering hyperaccumulation of triacylglycerol into sugarcane stems

Abstract Metabolic engineering to divert carbon flux from sucrose to oil in high biomass crop like sugarcane is an emerging strategy to boost lipid yields per hectare for biodiesel production. Sugarcane stems comprise more than 70% of the crops' biomass and can accumulate sucrose in excess of 20% of their extracted juice. The energy content of oils in the form of triacylglycerol (TAG) is more than twofold that of carbohydrates. Here, we report a step change in TAG accumulation in sugarcane stem tissues achieving an average of 4.3% of their dry weight (DW) in replicated greenhouse experiments by multigene engineering. The metabolic engineering included constitutive co‐expression of wrinkled1; diacylglycerol acyltransferase1‐2; cysteine‐oleosin; and ribonucleic acid interference‐suppression of sugar‐dependent1. The TAG content in leaf tissue was also elevated by more than 400‐fold compared to non‐engineered sugarcane to an average of 8.0% of the DW and the amount of total fatty acids reached about 13% of the DW. With increasing TAG accumulation an increase of 18:1 unsaturated fatty acids was observed at the expense of 16:0 and 18:0 saturated fatty acids. Total biomass accumulation, soluble lignin, Brix and juice content were significantly reduced in the TAG hyperaccumulating sugarcane lines. Overcoming this yield drag by engineering lipid accumulation into late stem development will be critical to exceed lipid yields of current oilseed crops.

09 BIOMASS FUELS↗