Search NASA⌕ Search

Engineering topics

Kapur, A.

Publications and source records attributed to Kapur, A..

3 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Duct acoustics and acoustic finite element method

A comprehensive solution method - Acoustic Finite Element Method - has been proposed. In order to generate confidence in the method proposed, the problem of influence of shear flow in a two-dimensional channel on sound propagation from an arbitrary source distribution has been theoretically formulated. From the preliminary investigation of application of acoustic finite element method, it seems that it can provide solutions to problems concerning the transmission of sound in variable area ducts, or in ducts in which the boundary layer depends on the streamwise variable, or in ducts with discontinuities in lining impedance and with end termination impedances, both the inlet and exhaust jet flows being taken into account.

Kapur, A.↗
NASA NTRS1974

Sound fields in a lined annular flow duct with lined radial splitters

High attenuation in the inlet duct of fan-jet engines is limited mainly because of two factors: the duct length is short and the frequency is high giving rise to a large duct width to wavelength ratio. Lined radial splitters may be installed. In this configuration not only is the absorbing surface area increased, the acoustic propagation properties in each of the segmented ducts are different to those in a cylindrical or annular duct without radial splitters. Such differences in properties can be used to advantage for mismatching the acoustic source. A lower order spinning mode must propagate as a higher order (integral or fractional) spinning mode. Cut-off phenomena may also be used to advantage. A theoretical modal analysis is made of the sound inside one segment of the annular duct with lined radial splitters.

Mungur, P.↗