Search NASA⌕ Search

Engineering topics

Karapetrov, G

Publications and source records attributed to Karapetrov, G.

Characterization of cubic Li$_{2}$$^{100}$MoO$_4$ crystals for the CUPID experiment

The CUPID Collaboration is designing a tonne-scale, background-free detector to search for double beta decay with sufficient sensitivity to fully explore the parameter space corresponding to the inverted neutrino mass hierarchy scenario. One of the CUPID demonstrators, CUPID-Mo, has proved the potential of enriched Li$_{2}$$^{100}$MoO$_4$ crystals as suitable detectors for neutrinoless double beta decay search. In this work, we characterised cubic crystals that, compared to the cylindrical crystals used by CUPID-Mo, are more appealing for the construction of tightly packed arrays. We measured an average energy resolution of (6.7$\pm$0.6) keV FWHM in the region of interest, approaching the CUPID target of 5 keV FWHM. We assessed the identification of $\alpha$ particles with and without a reflecting foil that enhances the scintillation light collection efficiency, proving that the baseline design of CUPID already ensures a complete suppression of this $\alpha$-induced background contribution. We also used the collected data to validate a Monte Carlo simulation modelling the light collection efficiency, which will enable further optimisations of the detector.

100Mo↗

Controlling T c of Iridium films using interfacial proximity effects

High precision calorimetry using superconducting transition edge sensors requires the use of superconducting films with a suitable T c , depending on the application. To advance high-precision macrocalorimetry, we require low-T c films that are easy to fabricate. A simple and effective way to suppress T c of superconducting Iridium through the proximity effect is demonstrated by using Ir/Pt bilayers as well as Au/Ir/Au trilayers. While Ir/Au films fabricated by applying heat to the substrate during Ir deposition have been used in the past for superconducting sensors, we present results of T c suppression on Iridium by deposition at room temperature in Au/Ir/Au trilayers and Ir/Pt bilayers in the range of $\sim$20-100~mK. Measurements of the relative impedance between the Ir/Pt bilayers and Au/Ir/Au trilayers fabricated show factor of $\sim$10 higher values in the Ir/Pt case. These new films could play a key role in the development of scalable superconducting transition edge sensors that require low-T c films to minimize heat capacity and maximize energy resolution, while keeping high-yield fabrication methods.

Hennings-Yeomans, R↗

The spectroscopic signature of Co magnetic state in Co{sub x}NbSe{sub 2} superconducting single crystals.

The magnetic state of Co in NbSe{sub 2} has been studied with low temperature scanning tunneling microscopy and spectroscopy. The local density of states (DOS) at the surface of Co{sub x}NbSe{sub 2}, for different dopings x, does not show bound states predicted in the case of superconductors with magnetic impurities. Only occasionally local asymmetries in the DOS are found at some impurity sites and they appear to be very local. These asymmetries, together with a very low magnetic moment obtained from susceptibility measurements, point towards a possible Kondo effect at play. Tunneling spectra recorded at the impurity site in the presence of a magnetic field of 7 T (i.e. when the sample is in the normal state) show a dip-like feature at the Fermi energy, reminiscent of the Fano resonance observed in magnetic adatoms on metallic surfaces.

36 MATERIALS SCIENCE↗

Dimensionality crossover in vortex dynamics of magnetically coupled F-S-F hybrids.

We report on the vortex dynamics in magnetically coupled F-S-F trilayers extracted from the analysis of the resistance-current isotherms. The superconducting thin film that is conventionally in the 2D vortex limit exhibits quite different behavior when sandwiched between ferromagnetic layers. The value of the dynamic critical exponent strongly increases in the F-S-F case due to screening of the stray vortex field by the adjacent ferromagnetic layers, leading to an effective dimensional crossover in vortex dynamics. Furthermore, the directional pinning by the magnetic stripe domains induces anisotropy in the vortex glass transition temperature and causes metastable avalanche behavior at strong driving currents.

36 MATERIALS SCIENCE↗

Anisotropic superconductivity and vortex dynamics in magnetially coupled F/S and F/S/F hybrids.

Magnetically coupled superconductor-ferromagnet hybrids offer advanced routes for nanoscale control of superconductivity. Magnetotransport characteristics and scanning tunneling microscopy images of vortex structures in superconductor-ferromagnet hybrids reveal rich superconducting phase diagrams. Focusing on a particular combination of a ferromagnet with a well-ordered periodic magnetic domain structure with alternating out-of-plane component of magnetization, and a small coherence length superconductor, we find directed nucleation of superconductivity above the domain wall boundaries. We show that near the superconductor-normal state phase boundary the superconductivity is localized in narrow mesoscopic channels. In order to explore the Abrikosov flux line ordering in F/S hybrids, we use a combination of scanning tunneling microscopy and Ginzburg-Landau simulations. The magnetic stripe domain structure induces periodic local magnetic induction in the superconductor, creating a series of pinning-anti-pinning channels for externally added magnetic flux quanta. Such laterally confined Abrikosov vortices form quasi-1D arrays (chains). The transitions between multichain states occur through propagation of kinks at the intermediate fields. At high fields we show that the system becomes nonlinear due to a change in both the number of vortices and the confining potential. In F/S/F hybrids we demonstrate the evolution of the anisotropic conductivity in the superconductor that is magnetically coupled with two adjacent ferromagnetic layers. Stripe magnetic domain structures in both F-layers are aligned under each other, resulting in a directional superconducting order parameter in the superconducting layer. The conductance anisotropy strongly depends on the period of the magnetic domains and the strength of the local magnetization. The anisotropic conductivity of up to three orders of magnitude can be achieved with a spatial critical temperature modulation of 5% of T{sub c}. Induced anisotropic properties in the F/S and F/S/F hybrids have a potential for future application in switching and nonvolatile memory elements operating at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selective catalysts for the hydrogen oxidation and oxygen reduction reactions by patterning of platinum with calix[4]arene molecules.

The design of new catalysts for polymer electrolyte membrane fuel cells must be guided by two equally important fundamental principles: optimization of their catalytic behaviour as well as the long-term stability of the metal catalysts and supports in hostile electrochemical environments. The methods used to improve catalytic activity are diverse, ranging from the alloying and de-alloying of platinum to the synthesis of platinum core-shell catalysts. However, methods to improve the stability of the carbon supports and catalyst nanoparticles are limited, especially during shutdown (when hydrogen is purged from the anode by air) and startup (when air is purged from the anode by hydrogen) conditions when the cathode potential can be pushed up to 1.5 V. Under the latter conditions, stability of the cathode materials is strongly affected (carbon oxidation reaction) by the undesired oxygen reduction reaction (ORR) on the anode side. This emphasizes the importance of designing selective anode catalysts that can efficiently suppress the ORR while fully preserving the Pt-like activity for the hydrogen oxidation reaction. Here, we demonstrate that chemically modified platinum with a self-assembled monolayer of calix[4]arene molecules meets this challenging requirement.

08 HYDROGEN↗

Superconducting and normal state parameters of single crystal Cu{sub 0.10}TiSe{sub 2}.

We report magnetoresistance measurements on superconducting single crystals of Cu{sub 0.10}TiSe{sub 2} using magnetic field perpendicular to TiSe{sub 2} planes. From measurements we determined the normal state as well as the superconducting state parameters including scattering time {tau}, mean free path l, zero-temperature resistivity {rho}(0), residual resistivity ratio RRR, London penetration depth {lambda}{sub L}, coherence length {zeta}(0), plasma frequency {omega}{sub p}, critical temperature T{sub c} and upper critical field H{sub c2}(T).

36 MATERIALS SCIENCE↗

Domain walls riding the wave.

Recent years have witnessed a rapid proliferation of electronic gadgets around the world. These devices are used for both communication and entertainment, and it is a fact that they account for a growing portion of household energy consumption and overall world consumption of electricity. Increasing the energy efficiency of these devices could have a far greater and immediate impact than a gradual switch to renewable energy sources. The advances in the area of spintronics are therefore very important, as gadgets are mostly comprised of memory and logic elements. Recent developments in controlled manipulation of magnetic domains in ferromagnet nanostructures have opened opportunities for novel device architectures. This new class of memories and logic gates could soon power millions of consumer electronic devices. The attractiveness of using domain-wall motion in electronics is due to its inherent reliability (no mechanical moving parts), scalability (3D scalable architectures such as in racetrack memory), and nonvolatility (retains information in the absence of power). The remaining obstacles in widespread use of 'racetrack-type' elements are the speed and the energy dissipation during the manipulation of domain walls. In their recent contribution to Physical Review Letters, Oleg Tretiakov, Yang Liu, and Artem Abanov from Texas A&M University in College Station, provide a theoretical description of domain-wall motion in nanoscale ferromagnets due to the spin-polarized currents. They find exact conditions for time-dependent resonant domain-wall movement, which could speed up the motion of domain walls while minimizing Ohmic losses. Movement of domain walls in ferromagnetic nanowires can be achieved by application of external magnetic fields or by passing a spin-polarized current through the nanowire itself. On the other hand, the readout of the domain state is done by measuring the resistance of the wire. Therefore, passing current through the ferromagnetic wire is the preferred method, as it combines manipulation and readout of the domain-wall state. The electrons that take part in the process of readout and manipulation of the domain-wall structure in the nanowire do so through the so-called spin transfer torque: When spin-polarized electrons in the ferromagnet nanowire pass through the domain wall they experience a nonuniform magnetization, and they try to align their spins with the local magnetic moments. The force that the electrons experience has a reaction force counterpart that 'pushes' the local magnetic moments, resulting in movement of the domain wall in the direction of the electron flow through the spin-transfer torque. The forces between the electrons and the local magnetic moments in the ferromagnet also create additional electrical resistance for the electrons passing through the domain wall. By measuring resistance across a segment of the nanowire, one determines if a domain wall is present; i.e., one can read the stored information. The interaction of the spin-polarized electrons with the domain wall in the ferromagnetic nanowire is not very efficient. Even for materials achieving high polarization of the free electrons, it is very difficult to move the magnetic domain wall. Several factors contribute to this problem, with imperfections of the ferromagnetic nanowire that cause domain-wall pinning being the dominant one. Permalloy nanowires, one of the best candidates for domain-wall-based memory and logic devices, require current densities of the order of 10{sup 8} A/cm{sup 2} in order to move a domain wall from a pinning well. Considering that this current has to pass through a relatively long wire, it is not very difficult to imagine that most of the energy will go to Joule heating. The efficiency of the process - the ratio of the energy converted to domain-wall motion to the total energy consumed - is comparable to that of an incandescent light bulb converting electricity to light. A step towards more efficient domain-wall-based memory devices is the advance of using alternating currents or current pulses to drive the domain walls. Injection of a spin-polarized current below the threshold value necessary to move the domain wall only causes oscillation of the domain wall inside the pinning potential. Exploiting the effect of resonance, one can apply a specific current waveform to drive the oscillations of the domain wall into resonance. Resonant amplification of domain-wall oscillations will free the domain wall from the pinning well at current levels that are a fraction of the dc threshold. Currents of an order of magnitude lower than before were shown to be sufficient to manipulate domain walls, thus reducing Joule heating 100 times. In their current paper, Tretiakov et al. provide a theoretical basis for the mechanism of resonant domain-wall motion in ferromagnetic nanowires.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Magnetic elements for switching magnetization magnetic force microscopy tips.

Using combination of micromagnetic calculations and magnetic force microscopy (MFM) imaging we find optimal parameters for novel magnetic tips suitable for switching magnetization MFM. Switching magnetization MFM is based on two-pass scanning atomic force microscopy with reversed tip magnetization between the scans. Within the technique the sum of the scanned data with reversed tip magnetization depicts local atomic forces, while their difference maps the local magnetic forces. Here we propose the design and calculate the magnetic properties of tips suitable for this scanning probe technique. We find that for best performance the spin-polarized tips must exhibit low magnetic moment, low switching fields, and single-domain state at remanence. The switching field of such tips is calculated and optimum shape of the Permalloy elements for the tips is found. We show excellent correspondence between calculated and experimental results for Py elements.

36 MATERIALS SCIENCE↗

Muon spin rotation study of the magnetic penetration depth in the intercalated graphite superconductor CaC{sub 6}.

We report temperature- and magnetic field-dependent bulk muon spin rotation measurements in a c-axis-oriented superconductor CaC{sub 6} in the mixed state. Using both a simple second-moment analysis and the more precise analytical Ginzburg-Landau model, we obtained a field-independent in-plane magnetic penetration depth {lambda}{sub ab}(0)=72(3) nm. The temperature dependencies of the normalized muon spin relaxation rate and of the normalized superfluid density result to be identical and both are well represented by the clean limit BCS model with 2{Delta}/k{sub B}T{sub c} = 3.6(1), suggesting that CaC{sub 6} is a fully gapped BCS superconductor in the clean limit regime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Novel magnetic tips developed for the switching magnetization magnetic force microscopy.

Using micromagnetic calculations we search for optimal magnetic properties of novel magnetic tips to be used for a Switching Magnetization Magnetic Force Microscopy (SM-MFM), a novel technique based on two-pass scanning with reversed tip magnetization. Within the technique the sum of two scans images local atomic forces and their difference maps the local magnetic forces. The tip magnetization is switched during the scanning by a small magnetic field. The technology of novel low-coercitive magnetic tips is proposed. For best performance the tips must exhibit low magnetic moment, low switching field, and single-domain state at remanence. Such tips are equipped with Permalloy objects of a precise shape that are defined on their tilted sides. We calculate switching fields of such tips by solving the micromagnetic problem to find the optimum shape and dimensions of the Permalloy objects located on the tips. Among them, hexagon was found as the best shape for the tips.

36 MATERIALS SCIENCE↗

Fabrication and characterization of platinum nanoparticle arrays of controlled size, shape and orientation.

We present a rigorous approach for the shape design of supported metal nanoparticle catalysts, morphologically identical to each other and epitaxially grown on strontium titanate substrates using electron beam lithography. We predict the particle shapes using Wulff construction based on density functional theory calculations of surface energies. Then, according to the theoretical predictions, we are able to tweak morphologies of the already produced nanocrystals by changing annealing conditions. The ability to design, produce and characterize the catalyst nanoparticles allows us to relate microscopic morphologies with macroscopic oxygen-reduction activities in perchloric acid [Komanicky et al., J. Am. Chem. Soc. 131 (2009) 5732]. The unexpectedly high oxygen-reduction activities proportional to inactive (1 0 0) facets led us to suggest a model where the reaction intermediates can cross over to neighboring facets in nanoscale proximity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonvolatile logic elements based on magnetically coupled FSF structures.

We demonstrate the evolution of the anisotropic conductivity in the superconductor that is magnetically coupled with two adjacent ferromagnetic layers. Stripe magnetic domain structure in the ferromagnetic layers results in directional superconducting order parameter in the superconducting layer. The conductance anisotropy strongly depends on the period of the magnetic domains and the strength of the local magnetization. The anisotropic conductivity of up to three orders of magnitude can be achieved with spatial critical temperature modulation of 5% of Tc. The effect could be exploited in low temperature nonvolatile logic and storage elements

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local effect of magnetic impurities on superconductivity in Co{sub x}NbSe{sub 2} and Mn{sub x}NbSe{sub 2} single crystals.

We investigate the effect of individual atomic impurities on the superconducting state that they are embedded in. Using low temperature scanning tunneling microscopy and spectroscopy we could identify Co and Mn atoms in the Co{sub x}NbSe{sub 2} and Mn{sub x}NbSe{sub 2} single crystals and observe the influence on the local electronic density of states (LDOS) at 0.4 K. We find that Co is in the weak scattering limit. In this case the LDOS is quite homogeneous on the sample surface, despite the number of defects, and retains sharp coherent superconducting peaks. This is in strong contrast to the effects of Mn impurities, which locally destroy superconductivity. In this case the LDOS shows a strong enhancement of spectral weight inside the superconducting gap even far from the Mn atoms. Moreover, two impurity bound states are found within the superconducting gap at E/{Delta}{sub 0} = 0.18 and 0.36 at locations close to defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗