Probing Water and Ion Diffusion in Functional Hydrogel Membranes by PFG-NMR
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Engineering topics
Katz, Lynn E.
Publications and source records attributed to Katz, Lynn E..
Prediction of alkaline earth metal ion adsorption on goethite for various background electrolytes with the CD-MUSIC model
As water scarcity drives the use of more saline water sources, contaminant fate and transport models must capture the impact of high concentrations of alkaline earth metal ions (AEMs) and background electrolytes in these more complex waters. By utilizing macroscopic adsorption data from various electrolyte systems, a Charge Distribution – Multisite Complexation (CD-MUSIC) model, capable of incorporating electrolyte adsorption, was able to accurately simulate the adsorption behavior of alkaline earth metal ions onto goethite. The modeling effort was guided by previous spectroscopic and surface complexation modeling of alkaline earth metal adsorption and built on previous CD-MUSIC modeling that accounted for changes in crystal face contributions to the surface site density as a function of specific surface area. Further, the model was constrained to consider only two dominant surface complex species for each metal ion adsorption reaction. These two species were selected from 44 possible species through objective curve fitting of single-solute macroscopic adsorption data. While most of the alkaline earth metal surface complexes formed outer-sphere complexes at the goethite surface, an inner-sphere species was utilized for Mg 2+ . With the surface complex species and equilibrium constants obtained from this study, the calibrated model successfully predicted alkaline earth metal ion adsorption over a wide range of solution and surface conditions; the model predictions encompassed a wide range of pH (5–11), solute/solid ratio (1.37 × 10 -5 – 8.33 × 10 -4 mol -solute /g -solid ), ionic strengths (0.01 M – 0.7 M), and background electrolytes (Na + , Cs + , Rb + , Cl - , and NO 3 - ) using the same crystal face contribution methodology for site density, capacitance values, and surface acidity constants adopted for proton and cadmium adsorption in previous work (Han and Katz, 2019). Model simulations for a range of background water chemistries demonstrated the potential for Mg 2+ to reduce Cd 2+ adsorption to goethite in model seawater and oil- and gas-produced waters.
42 ENGINEERING↗
Linking water quality, fouling layer composition, and performance of reverse osmosis membranes
Fouling of polyamide membranes during reverse osmosis (RO) is a major challenge for adopting membrane technologies to treat highly contaminated waters, especially those containing organic foulants (e.g., natural organic matter (NOM), polysaccharides) and dominant cations (e.g., sodium, magnesium, calcium). Here, this work combines bench-scale membrane fouling experiments with detailed characterization of feedwater chemistry and fouling layer composition/morphology to reveal fundamental mechanisms of (in)organic fouling during RO. Divalent cations are shown to promote fouling by hydrophobic NOM containing aromatic and carboxyl groups, while NOM fouling in the presence of a monovalent cation, sodium, occurs by smaller fulvic acids containing larger fractions of carboxyl groups and other oxygen-rich moieties. Calcium-carboxyl bridging occurs in solution and near the membrane surface to induce NOM aggregation on nanometer length scales. In complex waters containing foulant mixtures, co-fouling by calcium-carboxyl bridging and CaCO 3 precipitation influence membrane performance at longer timeframes. However, the flux decline observed for the co-fouling mechanism was less significant than the sum of its parts, suggesting both synergistic and antagonistic fouling mechanisms should be considered in membrane design/operation. These results encourage the design of pretreatment processes to reduce concentrations of multivalent ions and hydrophobic NOM in RO feedwaters, and of membrane materials to limit attachment/deposition of aggregates to/on polyamide surfaces.
42 ENGINEERING↗
Inverse Design of Pore Wall Chemistry To Control Solute Transport and Selectivity
Not Available
36 MATERIALS SCIENCE↗
The Donnan potential revealed
Selective transport of solutes across a membrane is critical for many biological, water treatment and energy conversion and storage systems. When a charged membrane is equilibrated with an electrolyte, an unequal distribution of ions arises between phases, generating the so-called Donnan electrical potential at the solution/membrane interface. The Donnan potential results in the partial exclusion of co-ion, providing the basis of permselectivity. Although there are well-established ways to indirectly estimate the Donnan potential, it has been widely reported that it cannot be measured directly. Here we report the first direct measurement of the Donnan potential of an ion exchange membrane equilibrated with salt solutions. Our results highlight the dependence of the Donnan potential on external salt concentration and counter-ion valence, and show a reasonable agreement with current theoretical models of IEMs, which incorporate ion activity coefficients. By directly measuring the Donnan potential, we eliminate ambiguities that arise from limitations inherent in current models.
25 ENERGY STORAGE↗
Effect of Dielectric Saturation on Ion Activity Coefficients in Ion Exchange Membranes
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Oil and Gas Produced Water Reuse: Opportunities, Treatment Needs, and Challenges
Advances in water treatment technologies paired with potential restrictions on oil and gas (O&G) produced water disposal could incentivize the beneficial reuse of treated produced water in the O&G industry. However, the remote nature of O&G operations limits the applicability of many of these solutions, which may be spatially inefficient, require operator supervision, or are ill-suited for the complex nature of produced water. Furthermore, the responsible, sustainable reuse of produced water as an alternative water source requires standardized analytical techniques for characterizing and determining the toxicity of treated produced water and improving our understanding of the fate and transport of various constituents. In the past decade, we made little progress in economically treating produced water for beneficial reuse outside of oilfield operations; the sole major breakthrough has been in the development of salt-tolerant fracturing chemicals that allow for reuse of produced water for fracking operations. Guided research should assist in the development of fit-for-purpose solutions to maximize the reuse of treated produced water. This is exemplified by the case studies presented here that detail currently operating treatment facilities for reclamation and reuse of produced water.
29 ENERGY PLANNING, POLICY, AND ECONOMY↗
Mine Water Use, Treatment, and Reuse in the United States: A Look at Current Industry Practices and Select Case Studies
Mining provides significant economic value while often impacting local water supplies and environments because of freshwater usage and waste disposal practices. In this paper we identify current practices in mine water, including how water is used in mining, influent and effluent water quality, treatment technologies, and end uses with the goal of informing future research on implementable, reliable, and cost-effective advanced water treatment in the mining sector. This study also reviews the available literature to broadly evaluate mining in the United States and performs a techno-economic assessment on water use and disposal for three detailed case studies applicable to lithium, uranium, and copper mines. These case studies highlight specific industry examples of distinct extraction methods, geographical regions, and mined commodities. Hypothetical scenarios based on case study baselines revealed potential impacts to mine water available for beneficial reuse through the use of novel water treatment technologies and alternate water management strategies. Finally, an assessment of national level impacts resulting from the reuse of treated mine source water is presented.
29 ENERGY PLANNING, POLICY, AND ECONOMY↗
Aqueous ion partitioning in Nafion: Applicability of Manning's counter-ion condensation theory
Nafion is a well-studied polymer of significant interest as a fuel cell membrane due to rapid transport of protons, which is often ascribed, at least in part, to its phase-separated morphology. The literature detailing ion sorption and transport in Nafion diverges considerably from that of water purification membranes, with contrasting analyses and models. To help bridge these gaps and facilitate comparisons of membranes with various structures, this study presents measurements of ion activity coefficients and sorption in Nafion 117 equilibrated with aqueous solutions of NaCl, MgCl 2 , and Na 2 SO 4 , which are relevant to water purification. The experimental data are compared to a theoretical framework based on Manning's counter-ion condensation theory and Donnan theory. Good agreement between the model and data is observed for NaCl and MgCl 2 , using no adjustable parameters. However, the model significantly underpredicts Na 2 SO 4 solubility, which is attributed to ion pairing effects. Furthermore, the results highlight the general applicability of counter-ion condensation theory to highly charged polymers, including those exhibiting nanoscale ordering, while revealing fundamental limitations related to ion pairing.
36 MATERIALS SCIENCE↗
Boric acid removal with polyol-functionalized polyether membranes
Poor selectivity of conventional desalination membranes for boron often necessitates multi-stage treatment trains to achieve desired boron removal for end uses such as irrigation. One approach to membrane design for improved single-pass boric acid removal is via incorporation of chelating ligands that selectively sorb boron. In this study, membranes based on epoxy-amine cross-linked poly(glycidyl glycidyl ether) (PGGE) were synthesized and functionalized with N-methyl-d-glucamine (NMDG), a polyol known to interact selectively with boron. PGGE and PGGE-NMDG membranes exhibited boron sorption isotherms that were well-described by dual mode isotherms. PGGE-NMDG sorbed 2.5 mmol B/g dry polymer from a neutral aqueous solution containing 100 mmol B/L, which was almost three times the adsorption density of a commercial boron selective resin, Amberlite IRA743. Further, the membranes were regenerated in acid without a significant loss of boron sorption capacity over four cycles. Interactions between boron and NMDG and PGGE sites (e.g., epoxides) impacted boron diffusion in both membranes. The use of ligand functionalized membranes to capture target solutes such as boron requires high loading of interacting sites to maximize uptake capacity. Establishing fundamental structure/property rules for boron selectivity could lead to new material designs with improved boron separation properties for water purification.
36 MATERIALS SCIENCE↗
Surfactant inhibition mechanisms of carbonate mineral dissolution in shale
Surfactants are common additives to hydraulic fracturing and enhanced oil recovery (EOR) fluids, and are under consideration for amendment to supercritical carbon dioxide for geological carbon sequestration (GCS). The effect of a common anionic surfactant, internal olefin sulfonate (IOS), on mineral dissolution from shale into brine was evaluated. When added to brine at concentrations exceeding the critical micelle concentration (94 mg/L), IOS inhibited carbonate mineral dissolution in an Eagle Ford shale, as well as dissolution of optical quality calcite (the dominant carbonate in the shale). Laser profilometry images provide spatial resolution across > 3 orders of magnitude, and indicate that IOS addition to brine both enhances the formation of new etch pits in calcite, and impedes their further growth. Time-of-flight secondary ion mass spectrometry surface profiles show for the first time that IOS preferentially adsorbs at calcite pit edges versus flat calcite surfaces (i.e., terraces). Surface pressure calculations, sulfur K-edge near edge X-ray absorption fine structure (NEXAFS) spectroscopy results, and density functional theory (DFT) calculations support this observation; the DFT results indicate that the sulfonate head group of the IOS molecule binds strongly to the calcite step site as compared to the terrace site. The S K-edge NEXAFS results indicate that IOS adsorbed more to etched calcite surfaces compared to smooth calcite surfaces. Overall, the results indicate that weak adsorption on flat calcite surfaces (i.e., terraces) disrupts water structure and enhances mass transfer of dissolution, while strong adsorption on calcite pit edges displaces adsorbed water and inhibits further etch pit growth. This work provides the first direct evidence of preferential adsorption of IOS to etched calcite surfaces and links it to macroscopic dissolution kinetics. Finally, this work has implications for surfactant-containing fluids used in hydraulic fracturing, EOR and potentially GCS for subsurface injection into carbonate rich reservoirs.
36 MATERIALS SCIENCE↗
National Alliance for Water Innovation (NAWI) Resource Extraction Sector Technology Roadmap 2021
The National Alliance for Water Innovation (NAWI) is a research consortium formed to accelerate transformative research in desalination and treatment to lower the cost and energy required to produce clean water from nontraditional water sources and realize a circular water economy. NAWI’s goal is to enable the manufacturing of energy-efficient desalination technologies in the United States at a lower cost with the same (or higher) quality and reduced environmental impact for 90 percent of nontraditional water sources within the next 10 years. The nontraditional source waters of interest include brackish water; seawater; produced and extracted water; power, mining, industrial, municipal, and agricultural waste waters. When these desalination and treatment technologies are fully developed and utilized, they will be able to contribute to the water needs for many existing end-use sectors. NAWI has identified five end-use sectors that are critical to the U.S. economy for further exploration: Power, Resource Extraction, Industry, Municipal, and Agriculture (PRIMA). This Resource Extraction Sector roadmap aims to advance desalination and treatment of nontraditional source waters for beneficial use in public water supplies by identifying research and development (R&D) opportunities that help overcome existing treatment challenges. Under NAWI’s vision, the transition from a linear to a circular water economy with nontraditional source waters will be achieved by advancing desalination and reuse technologies in six key areas: Autonomous operations, Precision separations, Resilient treatment and transport, Intensified brine management, Modular membrane systems, and Electrified treatment systems, collectively known as the A-PRIME areas. Technological advances in these different areas will enable nontraditional source waters to achieve pipe parity with traditional supplies.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
National Alliance for Water Innovation (NAWI) Industrial Sector Technology Roadmap 2021
The National Alliance for Water Innovation (NAWI) is a research consortium formed to accelerate transformative research in desalination and treatment to lower the cost and energy required to produce clean water from nontraditional water sources and realize a circular water economy. NAWI's goal is to enable the manufacturing of energy-efficient desalination technologies in the United States at a lower cost with the same (or higher) quality and reduced environmental impact for 90 percent of nontraditional water sources within the next 10 years. The nontraditional source waters of interest include brackish water; seawater; produced and extracted water; power, mining, industrial, municipal, and agricultural waste waters. When these desalination and treatment technologies are fully developed and utilized, they will be able to contribute to the water needs for many existing end-use sectors. NAWI has identified five end-use sectors that are critical to the U.S. economy for further exploration: Power, Resource Extraction, Industry, Municipal, and Agriculture (PRIMA). This Industrial Sector roadmap aims to advance desalination and treatment of nontraditional source waters for beneficial use in public water supplies by identifying research and development (R&D) opportunities that help overcome existing treatment challenges. Under NAWI's vision, the transition from a linear to a circular water economy with nontraditional source waters will be achieved by advancing desalination and reuse technologies in six key areas: Autonomous operations, Precision separations, Resilient treatment and transport, Intensified brine management, Modular membrane systems, and Electrified treatment systems, collectively known as the A-PRIME areas. Technological advances in these different areas will enable nontraditional source waters to achieve pipe parity with traditional supplies.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
Application of spectroscopic evidence to diffuse layer model (DLM) parameter estimation for cation adsorption onto ferrihydrite in single- and bi-solute systems
The diffuse layer model (DLM) is one of the most frequently used surface complexation models (SCM) for predicting cation adsorption onto ferrihydrite. However, the DLM with its existing database sometimes fails to predict cation adsorption, especially in multi-solute systems. Notably, the failure is often attributed to inaccurate selection of the surface complexes and/or underestimation of the site density for DLM formulation. DLM simulations of batch adsorption data conducted with cadmium, copper, lead, and zinc on ferrihydrite in CO2 free systems demonstrates the ability of the DLM to fit single-solute data reasonably well but highlights its limitations with respect to predicting bi-solute data. Modifications to the DLM were made in two steps. First, spectroscopic evidence was used to guide cation complexation reactions at the ferrihydrite surface. Second, surface characteristics (reactive site density, specific surface area, and acidity constants) of ferrihydrite were updated according to recent literature. The results from this study suggest that when spectroscopic verification is employed and surface site density is increased, a simple two-site DLM can predict cation adsorption on ferrihydrite in single-solute systems for pH data above 3.5 and in most of the bi-solute systems tested.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Affinity of small-molecule solutes to hydrophobic, hydrophilic, and chemically patterned interfaces in aqueous solution
Significance Increasing global population, urbanization, and climate change pose tremendous constraints on water availability. While membrane processes offer attractive, energy-efficient options, transformative advances in membrane technology are needed to enable reuse of poor-quality waters from diverse sources. This work brings fundamental understanding of solute–surface interactions to membrane phenomena, including selectivity and fouling. Molecular simulations reveal limitations of traditional predictive measures of solute–surface partitioning, suggesting alternative thermodynamic signatures for solute binding that highlight the contextual nature of hydrophobicity. An inverse design algorithm provides a tool to pattern membrane nanoscale chemistry to optimize solute affinity and selectivity. This work demonstrates how simulations can inform practical materials design for sustainable water treatment and, more broadly, many technologies involving water-mediated solute–surface interactions.
36 MATERIALS SCIENCE↗