Search NASA⌕ Search

Engineering topics

Kaupp, V. H.

Publications and source records attributed to Kaupp, V. H..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Preliminary analyses of SIB-B radar data for recent Hawaii lava flows

The Shuttle Imaging Radar (SIR-B) experiment acquired two L-band (23 cm wavelength) radar images (at about 28 and 48 deg incidence angles) over the Kilauea Volcano area of southeastern Hawaii. Geologic analysis of these data indicates that, although aa lava flows and pyroclastic deposits can be discriminated, pahoehoe lava flows are not readily distinguished from surrounding low return materials. Preliminary analysis of data extracted from isolated flows indicates that flow type (i.e., aa or pahoehoe) and relative age can be determined from their basic statistics and illumination angle.

Kaupp, V. H.↗
NASA NTRS1985

Preliminary geologic analyses of SIR-B radar data for Hawaii

A number of distinct topographic and textural units were discerned on SIR-B radar images of the Kilauea/Kau Desert area. The SIR-B enhanced large-scale topographic features, such as the Kahuku Pali and the Koae Faults (both oriented towards the radar antenna), while it was unable to detect features facing away from the radar antenna such as the Hilina and Kaoiki Pali. Textural units which were identified on the SIR-B images include aa flows of various ages, and several pyroclastic units. The extreme surface roughness of aa flows produced high radar returns on both the 28 deg and 48 deg SIR-B data sets. In contrast, pahoehoe flows produced smooth, low return units which were difficult to distinguish from surrounding radar-dark materials. It is suggested that multilook direction data, acquired at steeper incidence angles during a reflight of SIR-B, may aid in the further identification of pahoehoe flows and subtle topographic features.

Gaddis, L. R.↗
NASA NTRS1984

Model for optimal parallax in stereo radar imagery

Simulated stereo radar imagery is used to investigate parameters for a spaceborne imaging radar. Incidence angles ranging from small to intermediate to large are used with three digital terrain model areas which are representative of relatively flat, moderately rough, and mountaneous terrain. The simulated radar imagery was evaluated by interpreters for ease of stereo perception and information content, and rank ordered within each class of terrain. The interpreter's results are analyzed for trends between the height of a feature and either parallax or vertical exaggeration for a stereo pair. A model is developed which predicts the amount of parallax (or vertical exaggeration) an interpreter would desire for best stereo perception of a feature of a specific height. Results indicate the selection of angle of incidence and stereo intersection angle depend upon the relief of the terrain. Examples of the simulated stereo imagery are presented for a candidate spaceborne imaging radar having four selectable angles of incidence.

Pisaruck, M. A.↗
NASA NTRS1984

SAR image enhancement via post-correlation signal processing

Seventeen interpreters ranked sets of computer-generated radar imagery to assess the value of post-correlation processing on the interpretability of SAR (synthetic aperture radar) imagery. The post-correlation processing evaluated amounts to a nonlinear mapping of the signal exiting a digital correlator and allows full use of signal bandwidth for improving the spatial resolution or for noise reduction. The results indicate that it is reasonable to hypothesize an optimal SAR presentation format for specific applications even though this study was too limited to be specific.

Matthews, N. D.↗
NASA NTRS1984

Evaluation of the L-band scattering characteristics of volcanic terrain in aid of lithologic identification, assessment of SIR-B calibration, and development of planetary geomorphic analogs

The objectives of the Shuttle Imaging Radar-B (SIR-B) scattering study and calibration investigation of volcanic terrain are to delineate textural and structural features, to evaluate the L-band scattering characteristics, and to assess SIR-B calibration. Specific tasks are outlined and expected results are summarized.

Kaupp, V. H.↗
NASA NTRS1983

Evaluation of SIR-A space radar for geologic interpretation: United States, Panama, Colombia, and New Guinea

Comparisons between LANDSAT MSS imagery, and aircraft and space radar imagery from different geologic environments in the United States, Panama, Colombia, and New Guinea demonstrate the interdependence of radar system geometry and terrain configuration for optimum retrieval of geologic information. Illustrations suggest that in the case of space radars (SIR-A in particular), the ability to acquire multiple look-angle/look-direction radar images of a given area is more valuable for landform mapping than further improvements in spatial resolution. Radar look-angle is concluded to be one of the most important system parameters of a space radar designed to be used for geologic reconnaissance mapping. The optimum set of system parameters must be determined for imaging different classes of landform features and tailoring the look-angle to local topography.

Macdonald, H.↗
NASA NTRS1983

Simulation of spaceborne stereo radar imagery - Experimental results

Computer simulation of radar imagery was used to investigate spaceborne stereo radar. The major conclusions reached are that stereo pairs representing different angles of incidence with the same look-direction appear best and that the angles of incidence and stereo intersection angle be matched to the slope and relief of terrain. A parametric tradeoff analysis was performed for eleven different angles of incidence over three different model areas. The eleven angles spanned the range from small- to large-incidence angles. The three model areas were selected as typical of relatively flat, moderately rough, and mountainous terrain. The stereo pair judged best for each model area are included.

Kaupp, V. H.↗
NASA NTRS1983

An improvement in SAR image interpretability provided by post-correlation signal processing

A presentation on the basis of subjective analysis of computer-generated SAR imagery depicts the improvement in interpretability obtained by post-correlation signal processing. A parametric study was conducted to determine the improvement in interpretability obtained by the application of signal weighting functions on the post-processed returns. The results suggest that a marked improvement in interpretability results from symmetrizing the exponential distribution of the fading signal. Preliminary analysis indicates that signal weighting improves the contrast ratio between the mean value of adjacent homogeneous regions in a SAR scene.

Matthews, N. D.↗
NASA NTRS1983

An analysis of simulated stereo radar imagery

Simulated stereo radar imagery is used to investigate parameters for a spaceborne imaging radar. Incidence angles ranging from small to intermediate to large are used with three digital terrain model areas which are representative of relatively flat, moderately rough, and mountainous terrain. The simulated radar imagery was evaluated by interpreters for ease of stereo perception and information content, and rank order within each class of terrain. The interpreter's results are analyzed for trends between the height of a feature and either parallax or vertical exaggeration for a stereo pair. A model is developed which predicts the amount of parallax (or vertical exaggeration) an interpreter would desire for best stereo perception of a feature of a specific height. Results indicate the selection of angle of incidence and stereo intersection angle depend upon the relative relief of the terrain. Examples of the simulated stereo imagery are presented for a candidate spaceborne imaging radar having four selectable angles of incidence.

Pisaruck, M. A.↗
NASA NTRS1982

Incidence angle considerations for spacecraft imaging radar

The value of radar imagery for most geologic applications is greatest when obtained with relatively large incidence angles. It is infeasible to attain these large angles from spacecraft altitudes. A study is being conducted to assess the usefulness of imagery collected at smaller angles. Radar image simulation is employed to create imagery for platform scenarios at numerous angles of incidence for specific geologic features. Preliminary analyses and results are provided.

Kaupp, V. H.↗
NASA NTRS1982

Analysis of geologic terrain models for determination of optimum SAR sensor configuration and optimum information extraction for exploration of global non-renewable resources. Pilot study: Arkansas Remote Sensing Laboratory, part 1, part 2, and part 3

Computer-generated radar simulations and mathematical geologic terrain models were used to establish the optimum radar sensor operating parameters for geologic research. An initial set of mathematical geologic terrain models was created for three basic landforms and families of simulated radar images were prepared from these models for numerous interacting sensor, platform, and terrain variables. The tradeoffs between the various sensor parameters and the quantity and quality of the extractable geologic data were investigated as well as the development of automated techniques of digital SAR image analysis. Initial work on a texture analysis of SEASAT SAR imagery is reported. Computer-generated radar simulations are shown for combinations of two geologic models and three SAR angles of incidence.

Kaupp, V. H.↗
NASA NTRS1982

A study of image quality for radar image processing

Methods developed for image quality metrics are reviewed with focus on basic interpretation or recognition elements including: tone or color; shape; pattern; size; shadow; texture; site; association or context; and resolution. Seven metrics are believed to show promise as a way of characterizing the quality of an image: (1) the dynamic range of intensities in the displayed image; (2) the system signal-to-noise ratio; (3) the system spatial bandwidth or bandpass; (4) the system resolution or acutance; (5) the normalized-mean-square-error as a measure of geometric fidelity; (6) the perceptual mean square error; and (7) the radar threshold quality factor. Selective levels of degradation are being applied to simulated synthetic radar images to test the validity of these metrics.

King, R. W.↗
NASA NTRS1981

Optimization of radar imaging system parameters for geological analysis

The use of radar image simulation to model terrain variation and determine optimum sensor parameters for geological analysis is described. Optimum incidence angle is determined by the simulation, which evaluates separately the discrimination of surface features possible due to terrain geometry and that due to terrain scattering. Depending on the relative relief, slope, and scattering cross section, optimum incidence angle may vary from 20 to 80 degrees. Large incident angle imagery (more than 60 deg) is best for the widest range of geological applications, but in many cases these large angles cannot be achieved by satellite systems. Low relief regions require low incidence angles (less than 30 deg), so a satellite system serving a broad range of applications should have at least two selectable angles of incidence.

Waite, W. P.↗
NASA NTRS1981

Using radar image simulation to assess relative geometric distortions inherent in radar imagery

A unique method for observing the relative contributions of backscatter and propagation effects is afforded by radar image simulation. Digital terrain data are used in modeling radar image formation. Backscatter and propagation effects are modeled separately. These are incorporated serially and the image expression of each is noted. Sequences of images are presented illustrating these effects over a range of slopes and angles of incidence. The conclusions reached are that at angles of incidence that are smaller than the average slope of the terrain in a region, propagation phenomena predominate. As the angle of incidence increases beyond this, the radar image portrays an increasingly faithful representation of the backscatter from the ground. It is also demonstrated that digital simulation affords an important tool for evaluating complex interactions between the ground and radar, for training users in radar image interpretation, and for selecting optimum sensor parameters for particular applications.

Kaupp, V. H.↗
NASA NTRS1981

Wetland mapping with imaging radar

An analysis of Seasat radar imagery is presented to identify the radar signature of vegetation-covered water surfaces. Imagery taken on Aug. 21, 1978 displayed anomalously high returns over swamp lands near Lafayette, LA. Landsat scans of the area two days later revealed uniform vegetation cover in the area, and ground examination found the area to be filled with cypress trees in swamps. Similar results were obtained during an overflight above a region of southeast Arkansas. Mechanisms producing the high degree of reflectance are explored, and the possibility that the strong return is due to an interaction of the vegetation cover and the specular water surface underneath is mentioned. Further studies to identify the exact mechanisms producing the anomalous returns are recommended, as well as optimization of the viewing angle for general classes of vegetation density.

Waite, W. P.↗
NASA NTRS1981

Geological terrain models

The initial phase of a program to determine the best interpretation strategy and sensor configuration for a radar remote sensing system for geologic applications is discussed. In this phase, terrain modeling and radar image simulation were used to perform parametric sensitivity studies. A relatively simple computer-generated terrain model is presented, and the data base, backscatter file, and transfer function for digital image simulation are described. Sets of images are presented that simulate the results obtained with an X-band radar from an altitude of 800 km and at three different terrain-illumination angles. The simulations include power maps, slant-range images, ground-range images, and ground-range images with statistical noise incorporated. It is concluded that digital image simulation and computer modeling provide cost-effective methods for evaluating terrain variations and sensor parameter changes, for predicting results, and for defining optimum sensor parameters.

Kaupp, V. H.↗