Engineering topics

Keblinski, Pawel

Publications and source records attributed to Keblinski, Pawel.

3 records

DOE OSTI2023

Carbon-doped metal oxide interfacial nanofilms for ultrafast and precise separation of molecules

Membranes with molecular-sized, high-density nanopores, which are stable under industrially relevant conditions, are needed to decrease energy consumption for separations. Interfacial polymerization has demonstrated its potential for large-scale production of organic membranes, such as polyamide desalination membranes. We report an analogous ultrafast interfacial process to generate inorganic, nanoporous carbon-doped metal oxide (CDTO) nanofilms for precise molecular separation. For a given pore size, these nanofilms have 2 to 10 times higher pore density (assuming the same tortuosity) than reported and commercial organic solvent nanofiltration membranes, yielding ultra-high solvent permeance, even if they are thicker. Owing to exceptional mechanical, chemical, and thermal stabilities, CDTO nanofilms with designable, rigid nanopores exhibited long-term stable and efficient organic separation under harsh conditions.

Science & Technology - Other Topics↗

DOE OSTI2022

Using Crystallization to Control Filler Dispersion and Vice Versa in Polymer Nanocomposites

Our overall goal was to exploit our ability to control the spatial dispersion of spherical nanoparticles in a semicrystalline polymer matrix to tune the properties of the resulting nanocomposite. In particular, our two tasks were: Hierarchically organize spherical nanoparticles into unique morphologies by varying the ratio of the polymer crystallization rate to the filler diffusion rate during matrix solidification. Organize nanoparticles in the matrix melt into superstructrues as a means to tailor polymer crystallization rates, and potentially the crystal structure and/or morphology of the semicrystalline matrix.

36 MATERIALS SCIENCE↗

NASA NTRS2010

Modeling Initial Stage of Ablation Material Pyrolysis: Graphitic Precursor Formation and Interfacial Effects

Reactive molecular dynamics simulations are used to study initial stage of pyrolysis of ablation materials and their composites with carbon nanotubes and carbon fibers. The products formed during pyrolysis are characterized and water is found as the primary product in all cases. The water formation mechanisms are analyzed and the value of the activation energy for water formation is estimated. A detailed study on graphitic precursor formation reveals the presence of two temperature zones. In the lower temperature zone (less than 2000 K) polymerization occurs resulting in formation of large, stable graphitic precursors, and in the high temperature zone (greater than 2000 K) polymer scission results in formation of short polymer chains/molecules. Simulations performed in the high temperature zone on the phenolic resin composites (with carbon nanotubes and carbon fibers) shows that the presence of interfaces had no substantial effect on the chain scission rate or the activation energy value for water formation.

Desai, Tapan G.↗