Search NASA⌕ Search

Engineering topics

Keckler, C. R.

Publications and source records attributed to Keckler, C. R..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

An integrated approach to spacecraft control design

Flight opreation of numerous spacecraft over the years has clearly demonstrated the inherant coupling between the vehicle structure and its control system. Even early missions, such as Explorer I, have experienced this coupling phenomenon. More recent and vivid examples are the Hubble Telescope and the Upper Atmospheric Research Satellite (UARS). In an effort to mitigate these problems and to aid the engineer in his task of achieving maximum performance from this design, even in the presence of structural flexibility, NASA has undertaken a program to provide the methodology for the optimal and integrated design of the vehicle structure and its control system. The analysis and design methodology developed is described. Anticipated performance gains to be realized from this methodology are demonstrated through computer simulation and supported by experimental validations of the design approach.

Keckler, C. R.↗
NASA NTRS1985

Energy and momentum management of the Space Station using magnetically suspended composite rotors

The research addresses the feasibility of using magnetically suspended composite rotors to jointly perform the energy and momentum management functions of an advanced manned Space Station. Recent advancements in composite materials, magnetic suspensions, and power conversion electronics have given flywheel concepts the potential to simultaneously perform these functions for large, long duration spacecraft, while offering significant weight, volume, and cost savings over conventional approaches. The Space Station flywheel concept arising out of this study consists of a composite-material rotor, a large-angle magnetic suspension (LAMS) system, an ironless armature motor/generator, and high-efficiency power conversion electronics. The LAMS design permits the application of appropriate spacecraft control torques without the use of conventional mechanical gimbals. In addition, flywheel systems have the growth potential and modularity needed to play a key role in many future system developments.

Eisenhaure, D. B.↗
NASA NTRS1985

An overview of integrated flywheel technology for aerospace application

Space missions ranging from small scientific satellites to large manned spacecraft have, for many years, utilized systems of spinning flywheels to maintain vehicle attitude. These systems have included momentum and reaction wheels as well as control moment gyros. Extension of that technology to satisfy the additional tasks associated with energy storage has also been pursued. The combining of control and energy storage features into one system has been examined by NASA for space applications and demonstrated in the laboratory. The impact of technology advances in such areas as composite material rotors, magnetic suspensions, motor/generators, and electronics have prompted a re-evaluation of the viability of the flywheel storage system concept for aerospace applications. This paper summarizes the results of this re-examination and identifies shortfalls in the various technology areas.

Keckler, C. R.↗
NASA NTRS1984

An Assessment of Integrated Flywheel System Technology

The current state of the technology in flywheel storage systems and ancillary components, the technology in light of future requirements, and technology development needs to rectify these shortfalls were identified. Technology efforts conducted in Europe and in the United States were reviewed. Results of developments in composite material rotors, magnetic suspension systems, motor/generators and electronics, and system dynamics and control were presented. The technology issues for the various disciplines and technology enhancement scenarios are discussed. A summary of the workshop, and conclusions and recommendations are presented.

Keckler, C. R.↗
NASA NTRS1984

A summary of the 1983 Integrated Flywheel Technology Workshop

The use of flywheels to perform the functions of attitude control and/or energy storage on a variety of space missions was studied. Integrated Flywheel Technology was discussed. The four primary objectives are: (1) determine the potential of flywheels for energy storage system applications and for combined energy storage and attitude control concepts; (2) assess the state of the art (SOA) in integrated flywheel technology through a review of government sponsored programs; (3) identify those technology areas which are in critical need of development to meet projected space mission requirements; (4) scope a program for the coordinated development of the required technology.

Keckler, C. R.↗
NASA NTRS1984

Vibration isolation technology experiment

The objectives of the vibration isolation technology experiment are to demonstrate the viability of the magnetic suspension technology in providing the isolation of large structures elements from the external environment and to quantify the degree of isolation provided by this system. The approach proposed for this experiment is to mount a six-degrees-of-freedom magnetic bearing suspension system at the free end of a shuttle-attached flexible structure such as MAST. The disturbance generator, located on top of the isolation system, will be energized at selected and broadband frequencies to simulate a typical spacecraft vibration environment. Sensors located on the isolation system and the flexible structures element will be used to quantify the degree of isolation provided by this system.

Keckler, C. R.↗
NASA NTRS1984

Integrated Power/Attitude Control System (IPACS) technology experiment

An experiment is proposed that will perform the tasks associated with the control and energy storage/power generation functions attendant to space operations. It was shown in past studies that the integration of these functions into one system can result in significant weight, volume, and cost savings. The Integrated Power/Attitude Control System (IPACS) concept is discussed. During orbit day, power is derived from the solar cell arrays and, after appropriate conditioning, is used to operate the spacecraft subsystems, including the control system. In conventional approaches, a part of the collected solar energy is stored in a bank of batteries to permit operation of the vehicle's systems during orbit night. In the IPACS concept, the solar energy is stored in the spinning flywheels of the control system in the form of kinetic energy. During orbit night, the wheels are despun and, through the use of a wheel-shaft mounted generator, power is generated for the onboard subsystems. Operating these flywheels over a 50-percent speed variation permits the extraction of 75 percent of the stored energy while at the same time preserving 50 percent of the momentum capacity for control of the vehicle. Batteries can therefore be eliminated and significant weight and volume savings realized.

Keckler, C. R.↗
NASA NTRS1984

High accuracy pointing for earth observation experiments

An evaluation of mission requirements for postulated earth observation orbital payload experiments has indicated that high accuracy pointing and stabilization must be provided for adequate performance. A computer simulation has been conducted to determine the capabilities of an auxiliary pointing system which employs a combination of conventional gimbals and magnetic bearing actuators. This Annular Suspension and Pointing System (ASPS) is found to be a viable means of providing the high slew rates associated with landmark tracking from low orbit, while simultaneously achieving the high degree pointing and stabilization dictated by science payload requirements.

Keckler, C. R.↗
NASA NTRS1983

Integrated Flywheel Technology, 1983

Topics of discussion included: technology assessment of the integrated flywheel systems, potential of system concepts, identification of critical areas needing development and, to scope and define an appropriate program for coordinated activity.

Keckler, C. R.↗
NASA NTRS1983

Integrated Power/Attitude Control System (IPACS)

During orbit day, solar energy collected by the solar cell arrays and transformed into electrical energy is used to power the spacecraft subsystems, including the control system. In conventional spacecraft designs, a portion of the energy collected during the light portion of the orbit is stored in a set of batteries for use during orbit night. In the Integrated Power/Attitude Control System (IPACS) approach, that energy is stored in the rotating flywheel in the form of kinetic energy. Umbra electrical power demands are satisfied by attaching a generator to the wheel shaft and despinning the rotor. Through this approach, the battery system is no longer required and thus is eliminated.

Keckler, C. R.↗
NASA NTRS1983

Advanced Control and Power System (ACAPS) Technology Program

The advanced control and power system (ACAPS) program is to establish the technology necessary to satisfy space station and related large space structures requirements for efficient, reliable, and cost effective energy storage and attitude control. Technology advances in the area of integrated flywheel systems capable of performing the dual functions of energy storage and attitude control are outlined.

Keckler, C. R.↗
NASA NTRS1983

A system for load isolation and precision pointing

A system capable of satisfying the accuracy and stability requirements dictated by Shuttle-borne payloads utilizing large optics has been under joint NASA/Sperry development. This device, denoted the Annular Suspension and Pointing System, employs a unique combination of conventional gimbals and magnetic bearing actuators, thereby providing for the complete isolation of the payload from its external environment, as well as for extremely accurate and stable pointing (equal to about 0.01 arcsec). This effort has been pursued through the fabrication and laboratory evaluation of engineering model hardware. Results from these tests have been instrumental in generating high fidelity computer simulations of this load isolation and precision pointing system, and in permitting confident predictions of the system's on-orbit performance. The applicability of this system to the Solar Optical Telescope mission has been examined using the computer simulation. The worst case pointing error predicted for this payload while subjected to vernier reaction control system thruster firings and crew motions aboard the Shuttle was approximately 0.006 arcsec.

Keckler, C. R.↗
NASA NTRS1980

ASPS performance with large payloads onboard the Shuttle Orbiter

A high fidelity digital computer simulation was used to establish the viability of the Annular Suspension and Pointing System (ASPS) for satisfying the pointing and stability requirements of facility class payloads, such as the Solar Optical Telescope, when subjected to the Orbiter disturbance environment. The ASPS and its payload were subjected to disturbances resulting from crew motions in the Orbiter aft flight deck and VRCS thruster firings. Worst case pointing errors of 0.005 arc seconds were experienced under the disturbance environment simulated; this is well within the 0.08 arc seconds requirement specified by the payload.

Keckler, C. R.↗
NASA NTRS1979

Determination of ASPS performance for large payloads in the shuttle orbiter disturbance environment

A high fidelity simulation of the annular suspension and pointing system (ASPS), its payload, and the shuttle orbiter was used to define the worst case orientations of the ASPS and its payload for the various vehicle disturbances, and to determine the performance capability of the ASPS under these conditions. The most demanding and largest proposed payload, the Solar Optical Telescope was selected for study. It was found that, in all cases, the ASPS more than satisfied the payload's requirements. It is concluded that, to satisfy facility class payload requirements, the ASPS or a shuttle orbiter free-drift mode (control system off) should be utilized.

Keckler, C. R.↗
NASA NTRS1974

Description and simulation of an integrated power and attitude control system concept for space-vehicle application

An Integrated Power and Attitude Control System (IPACS) concept with potential application to a broad class of space missions is discussed. A description is given of the basic concept of combining the onboard energy storage and attitude control functions by storing energy in spinning flywheels which are used to provide control torques. A shuttle-launched Research and Applications Module (RAM) A303B solar-observatory mission having stringent pointing requirements (1.0 arc second) is selected to investigate possible interactions between energy storage and attitude control. A simulation of this spacecraft involving actual laboratory-model control-system hardware is presented. Simulation results are discussed which indicate that the IPACS concept, even in a failure-mode configuration, can readily meet the RAM A303B pointing requirements.

Will, R. W.↗
NASA NTRS1974

A spacecraft integrated power/attitude control system

A study to determine the viability and application of a system capable of performing the dual function of power storage/generation and attitude control has been conducted. Results from the study indicate that an integrated power/attitude control system (IPACS) can satisfy future mission requirements while providing significant savings in weight, volume, and cost over conventional systems. A failure-mode configuration of an IPACS was applied to a shuttle-launched RAM free-flyer and simulated using make-do hardware linked to a hybrid computer. Data from the simulation runs indicate that control interactions resulting from heavy power demands have minimal effect on system control effectiveness. The system was shown to be capable of meeting the stringent pointing requirements of 1 arc-second while operating under the influence of an orbital disturbance environment and during periods of momentum variations imposed by energy transfer requirements.

Keckler, C. R.↗
NASA NTRS1973

An integrated power/attitude control system /IPACS/ for space vehicle application

An integrated power and attitude control system (IPACS) concept with potential application to a broad class of space missions is discussed. The concept involves the storage and supply on demand of electrical energy in rotating flywheels while simultaneously providing control torques by controlled precession of the flywheels. The system is thus an alternative to the storage batteries used on present spacecraft while providing similar capability for attitude control as that represented by a control moment gyroscope (CMG) system. Potential IPACS configurations discussed include single- and double-rotor double-gimbal IPACS units. Typical sets of control laws which would manage the momentum and energy exchange between the IPACS and a typical space vehicle are discussed. Discussion of a simulation of a typical potential IPACS configuration and candidate mission concerned with pointing capability, power supply and demand flow, and discussion of the interactions between stabilization and control requirements and power flow requirements are presented.

Anderson, W. W.↗