Search NASA⌕ Search

Engineering topics

Keffeler, Evan

Publications and source records attributed to Keffeler, Evan.

Shear Behavior of Artificial Clay Seams within Bedded Salt Structures

Bedded salt contains thin layers of clay, also known as clay seams, in-between far thicker layers of salt. These inhomogeneities are thought to have first-order effects on the closure of nearby drifts and potential roof collapses. Despite their importance, characterizations of the peak shear strength and residual shear strength of clay seams in salt are extremely rare in the published literature. A previous paper reported results from laboratory direct shear experiments on clay seam samples from the Permian Basin in New Mexico. These clay seams behaved similar to intact salt, which was attributed to the abundance of salt crystals intersecting the clay seams. None of those specimens contained a distinct ¼" - ½" (6 -12 mm) thick clay seam, as has been observed in drifts at the Waste Isolation Pilot Plant (WIPP). Due to the difficulty in obtaining WIPP samples with these types of clay seams, artificial seams of bentonite and brine sandwiched between sections of salt were created and shear tested. Eight 4" diameter samples were created with either a ¼" or ½" a thick seam and then consolidated at 3000 psi prior to shear testing. The direct shear tests on these samples were performed at nominal normal stresses representative of expected WIPP in-situ conditions (500 to 1500 psi). The resulting shear stress vs. shear displacement curves exhibited a peak followed by a gradual decay of shear strength. The shear stress never transitioned to a true residual shear stress plateau, so the final shear strength at the end of each test (0.75" of shear displacement) was analyzed instead. Both the peak shear strength and the final shear strength conformed to Mohr- Coulomb behavior with friction angles and cohesion strengths consistent with a saturated, highly consolidated, clay. These new artificial clay seam results and the previous clay-interspersed-with-salt results likely bound the expected shear behavior of WIPP clay seams.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Proceedings of the 10th US/German Workshop on Salt Repository Research Design and Operation. Rev. 1

The 10th US/German Workshop on Salt Repository Research, Design, and Operation was hosted by RESPEC and South Dakota School of Mines & Technology, both located in the Black Hills of South Dakota. Over 60 registered participants representing Germany, United States, the Netherlands, and the United Kingdom availed themselves to excellent facilities on the School of Mines campus. As the 10th annual workshop, this occasion is a milestone of the modern era of collaboration between the US and Germany, which has extended to other countries with potential for radioactive waste disposal in salt. Thrust areas covered in the annual workshops are selected by participants and typically include elements of continuity from year to year. This year's themes included siting, modeling challenges, seal systems and materials, operational safety, and special topics. Two major breakout sessions addressed test sample conditioning and natural closure of salt openings. When the new-generation US/German workshops were conceived, one goal was to identify challenging issues related to salt repository sciences and then conduct open discussions in special breakout sessions. These timely sessions achieve the workshop paradigm and provide in-depth dialogue on important salt repository considerations. In many respects, general themes of these salt repository workshops reflect advances in the scientific basis for nuclear-waste disposal in salt formations and develop naturally as a consequence of unremitting attention largely as a result of the workshop commitment. Technical capabilities in the laboratory and field continue to improve in concert with accumulating experience. Because we are working together, mechanical deformation at the micro-scale can be interpreted at a large scale, which is fundamental to predictive modeling of salt repository evolution. This document records the Proceedings of the 2019 gathering of salt repository nations and has been compiled by RESPEC, demonstrating an adopted protocol in which the host organization creates that year's Proceedings. To assist with organization and compilation, individual chapters are summarized by volunteer subject-matter experts from the participatory audience; these contributors are recognized in the Acknowledgements. All formal presentations are included in this document, thus providing a resource for referencing and many excellent photographic images. Appendices include the agenda, list of participants, abstracts, and presentations. A primary purpose for recording workshop activities is to create and sustain an accessible record of salt repository research. These archives also illustrate transparent development of research areas each year.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗