Search NASA⌕ Search

Engineering topics

Keles, O.

Publications and source records attributed to Keles, O..

Twisted nanocolumns for LIBs via phi-sweep method in ion assisted e–beam deposition

In this work, twisted nanostructured silicon-copper (with 19%at. copper) thin film is fabricated by glancing angle deposition phi-sweep process of ion beam assisted electron beam evaporation method. The thin film delivers 977 mAh g(-1) after 100 cycles, when cycled with 100 mA g(-1) rate and performs 280 mAh g(-1) at 2.5 A g(-1) rate. The morphological and the compositional particularities of the electrode might govern this noticeable cycle performance: Gaps among the nanostructures accommodate large volume changes and provide easy access to lithium ions for reacting with silicon to deliver high capacity. Plus, the direct connection of nanostructures to the current collector displays short lithium travelling distance promoting lithiation kinetic. Moreover, small intermetallics creating electronic conductive pathways enhance the reversibility. And finally, 5 min ion assisted deposition increases the adhesion of the film while avoiding possible delamination, hence quick failure of the electrode in the early stages of cycling.

electron beam evaporation method↗

Si–Cu alloy nanowires grown by oblique angle deposition as a stable negative electrode for Li-ion batteries

Thin films having nanocolumnar arrays made of various Si–Cu atomic ratios (90–10, 80–20, 70–30 %) are fabricated by an ion-assisted oblique angle co-deposition technique to produce stable negative electrodes for lithium-ion batteries. Cu is added into the electrode because of its ductility and electron conductivity. Cu plays a crucial role in holding the electrode together, minimizing overall capacity loss and enabling faster electron transfer. Plus, Cu is inactive versus Li?; therefore, Si–Cu variation is expected to affect the electrochemical performances of the electrodes. In this work, the effect of Si–Cu atomic ratios on the morphologies and the structures of the electrodes are studied. Plus, the uses of these nanocolumns with different Cu contents are evaluated as anodes by electrochemical tests. The morphological analyses demonstrate that an increase in Si–Cu atomic ratio affects the width of the nanocolumns and the homogeneity of the thin film morphology. The increase in Cu content dramatically improves the capacity retention of Si–Cu anodes, whereas it decreases the initial discharge capacity.

36 MATERIALS SCIENCE↗

Structured SiCu thin films in LiB as anodes

Both helical and inclined columnar Si–10 at.% Cu structured thin films were deposited on Cu substrates using glancing angle deposition (GLAD) technique. In order to deposit Cu and Si two evaporation sources were used. Ion assistance was utilized in the first 5 min of the GLAD to enhance the adhesion and the density of the films. These films were characterized by thin film XRD, GDOES, SEM, and EDS. Electrochemical characterizations were made by testing the thin films as anodes in half-cells for 100 cycles. The results showed that the columnar SiCu thin film delivered 2200 mAh g -1 , where the helical one exhibited 2600 mAh g -1 , and, their initial coulombic efficiencies were found to be 38%–50% respectively. For the columnar and the helical thin film anodes, sustainable 520 and 800 mAh g -1 with 90% and 99% coulombic efficiencies were achieved for 100 cycles. These sustainable capacities showed the importance of the thin film structure having nano-sized crystals and amorphous particles. The higher surface area of the helices increases the capacity of the electrode because the contact area of the thin film anode with Li ions is increased, and the polarization which otherwise forms on the anode surface due to SEI formation is decreased. In addition, because of larger interspaces between the helices the ability of the anode to accommodate the volumetric changes is improved, which results in a higher coulombic efficiency and capacity retention during cycling test.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗