Search NASA⌕ Search

Engineering topics

Kennedy, B. C.

Publications and source records attributed to Kennedy, B. C..

7 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Image plane detector for the dynamics explorer Fabry-Perot interferometer

A compact twelve-channel photon-counting device based on existing Generation II imaging technology has been developed for use as the image-plane detector of the Dynamics Explorer Fabry-Perot interferometer. The device has an S-20 photocathode, three-microchannel plate electron multiplication stages, and an equal-area concentric-ring segmented anode whose geometry mimics that of the interference ring pattern produced by a plane etalon. The twelve channels sample equal and contiguous intervals in the spectrum. The purpose of the delopment has been to utilize the signal multiplex advantage of a multichannel detector in the measurement of Doppler shifts and line-broadening effects for naturally occurring atmospheric emission features of low intensity. The design, testing, calibration, and flight performance of the novel detector system are presented. In addition, measured emission line profiles at high resolution from the satellite instrument are presented to illustrate the operation of the device.

Killeen, T. L.↗
NASA NTRS1982

Stable and rugged etalon for the Dynamics Explorer Fabry-Perot interferometer. II - Performance

The etalon is shown to remain stable to less than 5-m/sec equivalent wind over one orbit and less than 100 m/sec over several months in orbit. The thermal stability considerations for the highly stable etalon are discussed, including the passive thermal control used in flight. The various physical processes which give rise to drifts in the peak transmission wavelength are quantified, and the kinematic mount used to isolate the etalon from large incremental forces caused by changes in the thermal environment is presented. The performance of the etalon in its flight configuration is evaluated.

Killeen, T. L.↗
NASA NTRS1981

The Fabry-Perot Interferometer on Dynamics Explorer

The Fabry-Perot Interferometer (FPI) on Dynamics Explorer is a remote sensing instrument designed to measure the temperature, meridional wind and density of the metastable atoms O(1S) and O(1D), and the ion O(plus)(2P) in the thermosphere. The measurements are made with a stable, high resolution Fabry-Perot etalon, which performs a wavelength analysis on the light detected from the thermospheric emission features by spatially scanning the interference fringe plane with a multichannel array detector. The wavelength analysis characterizes the Doppler line profile of the emitting species. A sequential altitude scan, performed by a commandable horizon scan mirror, provides a cross-sectional view of the thermodynamic and dynamic state of the thermosphere below the orbit of the Dynamics Explorer B satellite.

Hays, P. B.↗
NASA NTRS1977

Intercalibration of airglow observatories with the Atmosphere Explorer satellite

The visible airglow photometer on the Atmosphere Explorer C satellite has been used to compare the calibrations of a number of ground-based airglow observatories. Discrepancies between different ground stations as large as a factor of six have been revealed. Efforts to account for these discrepancies have resulted in the discovery of differences as large as a factor of two in the standard light sources in use at different observatories. The participation of additional observatories in the intercomparison of standard sources is solicited. The project has also led to the discovery of a source of error that can amount to another factor of two in the procedure used to calibrate many airglow instruments. In the course of the project, detailed maps based on satellite data have been made of the galactic and zodiacal-light background at a number of wavelengths, and a substantial source of contaminating emission has been discovered in the satellite data. The contamination appears to result from interaction of the spacecraft and the atmosphere at altitudes below 170 km.

Torr, M. R.↗
NASA NTRS1976

Photometer calibration error using extended standard sources

As part of a project to compare measurements of the night airglow made by the visible airglow experiment on the Atmospheric Explorer-C satellite, the standard light sources of several airglow observatories were compared with the standard source used in the absolute calibration of the satellite photometer. In the course of the comparison, it has been found that serious calibration errors (up to a factor of two) can arise when a calibration source with a reflecting surface is placed close to an interference filter. For reliable absolute calibration, the source should be located at a distance of at least five filter radii from the interference filter.

Torr, M. R.↗
NASA NTRS1973

The visible-airglow experiment on Atmosphere Explorer.

The visible-airglow experiment is an airglow photometer designed to measure various thermospheric emission features during the day and night both at low latitudes and in auroras. The photometer has two distinct optical channels, a high-sensitivity channel with a large field of view and a low-sensitivity channel with a narrow field of view to resolve small features. The system is protected by a combination attenuator and cathode back-biasing scheme which allows measurements of maximum sensitivity within a fraction of a second of viewing the sun. This experiment will be a part of the scientific payload on all three Atmosphere Explorer missions.

Hays, P. B.↗