Search NASA⌕ Search

Engineering topics

Kent, P. R. C.

Publications and source records attributed to Kent, P. R. C..

18 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Diffusion Monte Carlo: A pathway towards an accurate theoretical description of manganese oxides

Here, we present diffusion Monte Carlo (DMC) results for equation of state and quasiparticle gaps of manganese binary oxides MnO and MnO 2 and the ternary oxide LaMnO 3 . Owing to the limited approximations made and the direct treatment of electronic correlations, our DMC-based study correctly describes structural properties such as the lattice constant, bulk moduli, and cohesive energies. It correctly predicts the ground-state phase of these oxides, which have different valences. Our study demonstrates the capability of DMC methods to predict the structural properties of highly correlated systems, which have been identified as suitable candidates for many applications ranging from catalysis to electronic devices. Our study also serves as a benchmark for both the manganese pseudopotential and other methodological choices to be used in calculations of similar oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Oxygen vacancy formation energies in PbTiO 3 / SrTiO 3 superlattice

The defect stability in a prototypical perovskite oxide superlattice consisting of ${\mathrm{SrTiO}}_{3}$ and ${\mathrm{PbTiO}}_{3}$ (STO/PTO) is determined by using first principles density functional theory calculations. Specifically, the oxygen vacancy formation energies ${E}_{\mathrm{v}}$ in the paraelectric and ferroelectric phases of a superlattice with four atomic layers of STO and four layers of PTO (4STO/4PTO) are determined and compared. The effects of charge state, octahedral rotation, polarization, and interfaces on ${E}_{\mathrm{v}}$ are examined in this paper. The formation energies vary layer by layer in the superlattices, with ${E}_{\mathrm{v}}$ being higher in the ferroelectric phase than that in the paraelectric phase. The two interfaces constructed in these oxide superlattices, which are symmetrically equivalent in the paraelectric systems, exhibit very different formation energies in the ferroelectric superlattices and this can be seen to be driven by the coupling of ferroelectric and rotational modes. At equivalent lattice sites, ${E}_{\mathrm{v}}$ of charged vacancies is generally lower than that of neutral vacancies. Octahedral rotations $({\mathrm{a}}^{0}{\mathrm{a}}^{0}{\mathrm{c}}^{{-}})$ in the superlattices have a significant effect on ${E}_{\mathrm{v}}$, increasing the formation energy of vacancies located near the interface but decreasing the formation energy of the oxygen vacancies located in the bulk-like regions of the STO and PTO constituent parts. The formation-energy variations among different layers are found to be primarily caused by the difference in the local relaxation at each layer. Finally, these fundamental insights into the defect stability in perovskite superlattices can be used to tune defect properties by controlling the constituent materials of superlattices and interface engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Competing antiferromagnetism in a quasi-2D itinerant ferromagnet: Fe 3 GeTe 2

Fe 3 GeTe 2 is known as an air-stable layered metal with itinerant ferromagnetism with a transition temperature of about 220 K. From extensive dc and ac magnetic measurements, we have determined that the ferromagnetic layers of Fe 3 GeTe 2 order antiferromagnetically along the c-axis blow 152 K. The antiferromagnetic state was further substantiated by theoretical calculation to be the ground state. A magnetic structure model was proposed to describe the antiferromagnetic ground state as well as competition between antiferromagnetic and ferromagnetic states. Furthermore, Fe 3 GeTe 2 shares many common features with pnictide superconductors and may be a promising system in which to search for unconventional superconductivity.

2D material↗
DOE OSTI2016

Strong anisotropy and magnetostriction in the two-dimensional Stoner ferromagnet Fe 3 GeTe 2

Computationally characterizing magnetic properies of novel two-dimensional (2D) materials serves as an important first step of exploring possible applications. Using density-functional theory, we show that single-layer Fe 3 GeTe 2 is a potential 2D material with sufficiently low formation energy to be synthesized by mechanical exfoliation from the bulk phase with a van der Waals layered structure. In addition, we calculated the phonon dispersion demonstrating that single-layer Fe 3 GeTe 2 is dynamically stable. Furthermore, we find that similar to the bulk phase, 2D Fe 3 GeTe 2 exhibits amagnetic moment that originates from a Stoner instability. In contrast to other 2D materials, we find that single-layer Fe 3 GeTe 2 exhibits a significant uniaxial magnetocrystalline anisotropy energy of 920μ eV per Fe atom originating from spin-orbit coupling. In conclusion, we show that applying biaxial tensile strains enhances the anisotropy energy, which reveals strong magnetostriction in single-layer Fe 3 GeTe 2 with a sizable magneostrictive coefficient. Our results indicate that single-layer Fe 3 GeTe 2 is potentially useful for magnetic storage applications.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Rashba effect in single-layer antimony telluroiodide SbTeI

Exploring spin-orbit coupling (SOC) in single-layer materials is important for potential spintronics applications. In this paper, using first-principles calculations, we show that single-layer antimony telluroiodide SbTeI behaves as a two-dimensional semiconductor exhibiting a G 0 W 0 band gap of 1.82 eV. More importantly, we observe the Rashba spin splitting in the SOC band structure of single-layer SbTeI with a sizable Rashba coupling parameter of 1.39 eV Å, which is significantly larger than that of a number of two-dimensional systems including surfaces and interfaces. The low formation energy and real phonon modes of single-layer SbTeI imply that it is stable. Finally, our study suggests that single-layer SbTeI is a candidate single-layer material for applications in spintronics devices.

2-D materials↗
DOE OSTI2015

Computational discovery of ferromagnetic semiconducting single-layer CrSnTe 3

Despite many single-layer materials being reported in the past decade, few of them exhibit magnetism. Here we perform first-principles calculations using accurate hybrid density functional methods (HSE06) to predict that single-layer CrSnTe 3 (CST) is a ferromagnetic semiconductor, with band gaps of 0.9 and 1.2 eV for the majority and minority spin channels, respectively. We determine the Curie temperature as 170 K, significantly higher than that of single-layer CrSiTe 3 (90K) and CrGeTe 3 (130 K). This is due to the enhanced ionicity of the Sn-Te bond, which in turn increases the superexchange coupling between the magnetic Cr atoms. We further explore the mechanical and dynamical stability and strain response of this single-layer material for possible epitaxial growth. Lastly, our study provides an intuitive approach to understand and design novel single-layer magnetic semiconductors for a wide range of spintronics and energy applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Successes and failures of Hubbard-corrected density functional theory: The case of Mg doped LiCoO{sub 2}

We have evaluated the successes and failures of the Hubbard-corrected density functional theory approach to study Mg doping of LiCoO{sub 2}. We computed the effect of the U parameter on the energetic, geometric, and electronic properties of two possible doping mechanisms: (1) substitution of Mg onto a Co (or Li) site with an associated impurity state and (2) formation of impurity-state-free complexes of substitutional Mg and point defects in LiCoO{sub 2}. We find that formation of impurity states results in changes on the valency of Co in LiCoO{sub 2}. Variation of the Co U shifts the energy of the impurity state, resulting in energetic, geometric, and electronic properties that depend significantly on the specific value of U. In contrast, the properties of the impurity-state-free complexes are insensitive to U. These results identify reasons for the strong dependence on the doping properties on the chosen value of U and for the overall difficulty of achieving agreement with the experimentally known energetic and electronic properties of doped transition metal oxides such as LiCoO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Dynamic load balancing for petascale quantum Monte Carlo applications: The Alias method

Diffusion Monte Carlo is the most accurate widely used Quantum Monte Carlo method for the electronic structure of materials, but it requires frequent load balancing or population redistribution steps to maintain efficiency and avoid accumulation of systematic errors on parallel machines. The load balancing step can be a significant factor affecting performance, and will become more important as the number of processing elements increases. We propose a new dynamic load balancing algorithm, the Alias Method, and evaluate it theoretically and empirically. An important feature of the new algorithm is that the load can be perfectly balanced with each process receiving at most one message. It is also optimal in the maximum size of messages received by any process. We also optimize its implementation to reduce network contention, a process facilitated by the low messaging requirement of the algorithm. Empirical results on the petaflop Cray XT Jaguar supercomputer at ORNL showing up to 30% improvement in performance on 120,000 cores. The load balancing algorithm may be straightforwardly implemented in existing codes. The algorithm may also be employed by any method with many near identical computational tasks that requires load balancing.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2012

Solid–Electrolyte Interphase Formation and Electrolyte Reduction at Li-Ion Battery Graphite Anodes: Insights from First-Principles Molecular Dynamics

Understanding the nature and formation of the solid–electrolyte interphase (SEI) formed in electrochemical storage devices, such as Li-ion batteries, is most important for improving functionality. Few experiments exist that adequately probe the SEI, particularly in situ. We perform predictive ab initio molecular dynamics simulations of the anode–electrolyte interface for several electrolytes and interface functionalizations. These show strongly differing effects on the reducibility of the electrolyte. Electrolyte reduction occurs rapidly, on a picosecond time scale. Orientational ordering of electrolyte near the interface precedes reduction. The reduced species depend strongly on surface functionalization and presence of LiPF6 salt. While LiPF6 salt in ethylene carbonate is more stable at a hydrogen-terminated anode, oxygen/hydroxyl termination causes spontaneous dissociation to form LiF and other fluorophosphates. LiF migrates to the interface creating chainlike structures, consistent with experimental observations of LiF agglomeration. Inorganic products such as LiF and Li2CO3 migrate closer to the anode than purely organic components, consistent with their more ionic character. Significantly, we conclude that while the electrolyte reduction occurs at the molecular level near the interface, requiring specific alignments and proximity, the reducibility is governed by the average reduction potential barrier between the electrode (anode) and the electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2012

Novel Cooperative Interactions and Structural Ordering in H[subscript 2]S-H[subscript 2]

Hydrogen sulfide (H{sub 2}S) and hydrogen (H{sub 2}) crystallize into a 'guest-host' structure at 3.5 GPa and, at the initial formation pressure, the rotationally disordered component molecules exhibit weak van der Waals-type interactions. With increasing pressure, hydrogen bonding develops and strengthens between neighboring H{sub 2}S molecules, reflected in a pronounced drop in S-H vibrational stretching frequency and also observed in first-principles calculations. At 17 GPa, an ordering process occurs where H{sub 2}S molecules orient themselves to maximize hydrogen bonding and H{sub 2} molecules simultaneously occupy a chemically distinct lattice site. Intermolecular forces in the H{sub 2}S+H{sub 2} system may be tuned with pressure from the weak hydrogen-bonding limit to the ordered hydrogen-bonding regime, resulting in a novel clathrate structure stabilized by cooperative interactions.

08 HYDROGEN↗
DOE OSTI2011

Optimization of the CMDFT Code

This report outlines the optimization of the CMDFT code by Xiaoguang Zhang during June-July 2006. The overall improvement in speed is nearly 40%. Possible further optimizatins are also discussed.

99 GENERAL AND MISCELLANEOUS↗