Search NASA⌕ Search

Engineering topics

Khitrov, Victor V.

Publications and source records attributed to Khitrov, Victor V..

Large-mode-area optical fibers and optical fiber amplifiers in the eye-safe regime

The present technology provides large mode area optical fibers engineered to have normal dispersion around 1600 nm, enabling high power Raman amplification at eye safer wavelengths. The fibers can have a main core and one or more side cores disposed relative to the main core so that modes of the main core and the one or more side cores hybridize into supermodes with modified dispersion.

Pax, Paul H.↗

Method for fast and efficient fiber tapering

The present disclosure relates to a method of forming a tapered optical fiber, where the optical fiber has a cladding encasing a core and has an initial outer diameter. The method involves applying opposing forces to spaced apart sections of the optical fiber. The spaced apart sections define a length portion representing a waist region. While applying the opposing forces, simultaneously applying heat to the waist region to gradually produce a taper of the optical fiber within the waist region. The taper has a first diameter at a midpoint of the waist region which is less than the initial outer diameter. An etch operation is then performed by chemically etching at least a subportion of the waist region of the optical fiber to reduce the subportion to a second diameter which is less than the first diameter.

Bond, Tiziana C.↗

Wavelength selective transfer of optical energy

An all fiber wavelength selective coupler provides wavelength selective transfer of optical energy between two or more separated waveguides. The coupler includes signal cores that are separated enough that they can be fusion spliced to standard fibers as lead-in and lead-out pigtails. A bridge between the signal cores facilitates transfer of the optical energy through a process of evanescent coupling. In one example, the bridge is formed of a series of graded index cores.

Allen, Graham S.↗

Nd.sup.3+fiber laser and amplifier

An Nd.sup.3+ optical fiber laser and amplifier operating in the wavelength range from 1300 to 1450 nm is described. The fiber includes a rare earth doped optical amplifier or laser operating within this wavelength band is based upon an optical fiber that guides light in this wavelength band. The waveguide structure attenuates light in the wavelength range from 850 nm to 950 nm and from 1050 nm to 1150 nm.

Dawson, Jay W.↗

E-band fiber laser performance and power analysis with longitudinally averaged population modeling

To help facilitate the modeling of new fiber laser systems, such as those with complex functional microstructures, we report on a simplified modeling methodology that can accommodate the parasitic kinetic effects often present in such systems. The essence of our approach is to integrate kinetics over the length of the gain medium at the outset, thereby forfeiting longitudinally resolved information about the system but simplifying its energetics analysis. To illustrate the benefits of our new approach over more conventional coupled-rate-equation analyses, we apply our model to an Nd 3 + -doped fiber laser operating on the F 3 / 2 4 - I 4 13 / 2 transition at 1400 nm. The model produces closed-form solutions for the various output channels available to the pump power and enables projections of ultimate laser performance to be conveniently generated.

47 OTHER INSTRUMENTATION↗

Waveguide design for line selection in fiber lasers and amplifiers

Rare earth doped fiber lasers can be robust and efficient sources of high quality light, but are usually limited to the highest gain transitions of the active species. But rare earths typically possess a multitude of potentially useful transitions that might be accessed if the dominant transition can be suppressed. In fiber lasers this suppression is complicated by the very high net gain the dominant transitions exhibit; effective suppression requires some mechanism distributed along the length of the fiber. We have developed a novel waveguide with resonant leakage elements that frustrate guidance at well-defined and selectable wavelengths. Based on this waveguide, we have fabricated a Large Mode Area Neodymium doped fiber with suppression of the four-level transition around 1060 nm, and demonstrated lasing on the three-level transition at 930 nm with good efficiency.

36 MATERIALS SCIENCE↗

E-band Nd 3+ amplifier based on wavelength selection in an all-solid micro-structured fiber

Here, a Nd 3+ fiber amplifier with gain from 1376 nm to 1466 nm is demonstrated. This is enabled by a wavelength selective waveguide that suppresses amplified spontaneous emission between 850 nm and 1150 nm. It is shown that while excited state absorption (ESA) precludes net gain below 1375 nm with the exception of a small band from 1333 nm to 1350 nm, ESA diminishes steadily beyond 1375 nm allowing for the construction of an efficient fiber amplifier with a gain peak at 1400 nm and the potential for gain from 1375 nm to 1500 nm. A peak small signal gain of 13.3 dB is measured at 1402 nm with a noise figure of 7.6 dB. Detailed measurements of the Nd 3+ emission and excited state absorption cross sections suggest the potential for better performance in improved fibers. Specifically, reduction of the fiber mode field diameter from 10.5 µm to 5.25 µm and reduction of the fiber background loss to <10 dB/km at 1400 nm should enable construction of an E-band fiber amplifier with a noise figure < 5 dB and a small signal gain > 20 dB over 30 nm of bandwidth. Such an amplifier would have a form factor and optical properties similar to current erbium fiber amplifiers, enabling modern fiber optic communication systems to operate in the E-band with amplifier technology similar to that employed in the C and L bands.

42 ENGINEERING↗

Scalable waveguide design for three-level operation in Neodymium doped fiber laser

We have constructed a double clad neodymium doped fiber laser operating on the three-level 4 F 3/2 → 4 I 9/2 transition. The laser has produced 11.5 W at 925 nm with 55% slope efficiency when pumped at 808 nm, comparable to the best previous results for a double-clad fiber configuration on this transition. Higher power pumping with both 808 nm and 880 nm sources resulted in an output of 27 W, albeit at lower slope efficiency. In both cases, output power was limited by available pump, indicating the potential for further power scaling. To suppress the stronger four-level 4 F 3/2 → 4 I 11/2 transition we developed a waveguide that provides spectral filtering distributed along the length of the fiber, based on an all-solid micro-structured optical fiber design, with resonant inclusions creating a leakage path to the cladding. Furthermore, the waveguide supports large mode areas and provides strong suppression at selectable wavelength bands, thus easing the restrictions on core and cladding sizes that limited power scaling of previous approaches.

42 ENGINEERING↗

12W laser amplification at 1427nm on the 4 F 3/2 to 4 I 13/2 spectral line in an Nd 3+ doped fused silica optical fiber

A 9.3dB improvement in optical gain and a 100x improvement in total optical power over prior published experimental results from the 4 F 3/2 to 4 I 13/2 transition in an Nd 3+ doped fused silica optical fiber is demonstrated. This is enabled via an optical fiber waveguide design that creates high spectral attenuation in the 1050-1120nm-wavelength range, a continuous spectral filter for the primary 4 F 3/2 to 4 I 11/2 optical transition. A maximum output power at 1427nm of 1.2W was attained for 43mW coupled seed laser power and 22.2W of coupled pump diode laser power at 880nm a net optical gain of 14.5dB. Reducing the coupled seed laser power to 2.5mW enabled the system to attain 19.3dB of gain for 16.5W of coupled pump power. Four issues limited results; non-optimal seed laser wavelength, amplified spontaneous emission on the 4 F 3/2 to 4 I 9/2 optical transition, low absorption of pump light from the cladding and high spectral attenuation in the 1350-1450nm range. Lastly, future fibers that mitigate these issues should lead to significant improvements in the efficiency of the laser amplifier, though the shorter wavelength region of the transition from 1310nm to >1350nm is still expected to be limited by excited state absorption.

42 ENGINEERING↗