Magnetometer based on spin wave interferometer
A magnetic field detector and associated methods are shown. One example of a magnetic field detector uses spin wave interference to detect information about an external magnetic field.
Engineering topics
Publications and source records attributed to Khitun, Alexander.
A magnetic field detector and associated methods are shown. One example of a magnetic field detector uses spin wave interference to detect information about an external magnetic field.
Quantum computers are proven to be more efficient at solving a specific class of problems compared to traditional digital computers. Superposition of states and quantum entanglement are the two key ingredients that make quantum computing so powerful. However, not all quantum algorithms require quantum entanglement (e.g., search through an unsorted database). Is it possible to utilize classical wave superposition to speed up database searching as much as by using quantum computers? There were several attempts to mimic quantum computers using classical waves. It was concluded that the use of classical wave superposition comes with the cost of an exponential increase in resources. In this work, we consider the feasibility of building classical wave-based devices able to provide fundamental speedup over digital counterparts without the exponential overhead. We present experimental data on database searching through a magnetic database using spin wave superposition. The results demonstrate the same speedup as expected for quantum computers. Also, we present examples of numerical modeling demonstrating classical wave interference for period finding. This approach may not compete with quantum computers with efficiency but outperform classical digital computers. We argue that classical wave-based devices can perform some of the quantum algorithms with the same efficiency as quantum computers as long as quantum entanglement is not required.
Here, in this Letter, we present experimental data that demonstrate a spin wave interference detection using an inverse spin Hall effect (ISHE). Two coherent spin waves are excited in a yttrium-iron garnet waveguide by continuous microwave signals. The initial phase difference between the spin waves is controlled by the external phase shifter. The ISHE voltage is detected at a distance of 2 and 4 mm away from the spin wave generating antennas by an attached Pt layer. Experimental data show ISHE voltage oscillation as a function of the phase difference between the two interfering spin waves. This experiment demonstrates an intriguing possibility of using ISHE in a spin wave logic circuit converting a spin wave phase into an electric signal.
Not provided.
We propose and develop reversible magnetic logic gates based on spin wave interference. The gates consist of passive elements including spin waveguides, cross-junctions, and phase shifters. Logic 0 and 1 are encoded in the phase of the propagating spin wave (0 or $π$). There are different possible input-output trajectories for the propagating spin waves, where some of the trajectories contain phase shifters and others do not. In each case, the particular input-output trajectory and the resultant output phase depend on the input phase combination. The redirection takes place in the cross junctions. Two waves coming to a junction in-phase propagate through the junction without reflection. In contrast, two waves coming to a junction out-of-phase are completely reflected back. The process of redirection is illustrated by numerical modeling of a nanometer-scale junction comprising two chains of spins, which operates at zero temperature. We also present experimental data on spin wave redirection in a micrometer-size cross junction made of Y 3 Fe 2 (FeO 4 ) 3 operating at room temperature. Our results demonstrate a prominent spin wave redirection, where the ratio of the transmitted power between the in-phase and out-of-phase cases exceeds 45 dB at room temperature. Based on these experimental data, we estimate the energy per operation in spin wave reversible logic circuits. The proposed reversible gates may provide a route to magnetic logic circuitry with power dissipation less than $kT$ per operation.
We investigated a possible use of the magnonic interferometric switches in multi-valued logic circuits. The switch is a three-terminal device consisting of two spin channels where input, control, and output signals are spin waves. Signal modulation is achieved via the interference between the source and gate spin waves. We report experimental data on a micrometer scale prototype based on the Y 3 Fe 2 (FeO 4 ) 3 structure. The output characteristics are measured at different angles of the bias magnetic field. The On/Off ratio of the prototype exceeds 13 dB at room temperature. Experimental data are complemented by the theoretical analysis and the results of micro magnetic simulations showing spin wave propagation in a micrometer size magnetic junction. Here, we also present the results of numerical modeling illustrating the operation of a nanometer-size switch consisting of just 20 spins in the source-drain channel. The utilization of spin wave interference as a switching mechanism makes it possible to build nanometer-scale logic gates, and minimize energy per operation, which is limited only by the noise margin. The utilization of phase in addition to amplitude for information encoding offers an innovative route towards multi-state logic circuits. We describe possible implementation of the three-value logic circuits based on the magnonic interferometric switches. The advantages and shortcomings inherent in interferometric switches are also discussed.
Determining the prime factors of a given number $N$ is a problem that requires super-polynomial time for conventional digital computers. A polynomial-time algorithm was invented by Shor for quantum computers. In this paper, we present experimental data that demonstrate prime factorization using spin-wave interference but without quantum entanglement. Prime factorization includes three major steps. First, a general-type computer calculates the sequence of numbers m k mod($N$), where $N$ is the number to be factorized, m is a randomly chosen positive integer, and k = 1, 2, 3, 4, 5, 6…. Next, the period of the calculated sequence $r$ is determined by exploiting spin-wave interference. Finally, the general-type computer determines the primes based on the obtained $r$. The experiment for period finding was conducted on a six-terminal Y 3 Fe 2 (FeO 4 ) 3 device. We chose number 15 for testing and determined its primes using a sequence of measurements. The obtained experimental data for a micrometer-sized prototype aimed to demonstrate the benefits of using spin-wave devices to solve complex computational problems. Scalability is one of the major strengths inherent in this type of wave-based device, which may provide a route to nanometer-sized logic circuits. We discuss the physical and technological limitations of this approach, which define the maximum size of N and the computational speed. Although this classical approach cannot compete with the quantum algorithm in terms of efficiency, magnonic holographic devices can potentially be used as complementary logic units aimed at speeding up prime factorization for classical computers.
A frequency conversion device, which may include a radiofrequency (RF) mixer device, includes a substrate and a ferromagnetic film disposed over a surface of the substrate. An insulator is disposed over the ferromagnetic film and at least one microstrip antenna is disposed over the insulator. The ferromagnetic film provides a non-linear response to the frequency conversion device. The frequency conversion device may be used for signal mixing and amplification. The frequency conversion device may also be used in data encryption applications.
In this work, we describe the capabilities of Magnonic Holographic Memory (MHM) for parallel database search and prime factorization. MHM is a type of holographic device, which utilizes spin waves for data transfer and processing. Its operation is based on the correlation between the phases and the amplitudes of the input spin waves and the output inductive voltage. The input of MHM is provided by the phased array of spin wave generating elements allowing the producing of phase patterns of an arbitrary form. The latter makes it possible to code logic states into the phases of propagating waves and exploit wave superposition for parallel data processing. We present the results of numerical modeling illustrating parallel database search and prime factorization. The results of numerical simulations on the database search are in agreement with the available experimental data. The use of classical wave interference may results in a significant speedup over the conventional digital logic circuits in special task data processing (e.g., √n in database search). Potentially, magnonic holographic devices can be implemented as complementary logic units to digital processors. Physical limitations and technological constrains of the spin wave approach are also discussed.
In this work, we report on the demonstration of voltage-driven spin wave excitation, where spin waves are generated by multiferroic magnetoelectric (ME) cell transducers driven by an alternating voltage, rather than an electric current. A multiferroic element consisting of a magnetostrictive Ni film and a piezoelectric [Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}]{sub (1−x)}–[PbTiO{sub 3}]{sub x} substrate was used for this purpose. By applying an AC voltage to the piezoelectric, an oscillating electric field is created within the piezoelectric material, which results in an alternating strain-induced magnetic anisotropy in the magnetostrictive Ni layer. The resulting anisotropy-driven magnetization oscillations propagate in the form of spin waves along a 5 μm wide Ni/NiFe waveguide. Control experiments confirm the strain-mediated origin of the spin wave excitation. The voltage-driven spin wave excitation, demonstrated in this work, can potentially be used for low-dissipation spin wave-based logic and memory elements.