Search NASA⌕ Search

Engineering topics

Kikinzon, Evgeny

Publications and source records attributed to Kikinzon, Evgeny.

Multi-material swept face remapping on polyhedral meshes

Remapping is a conservative interpolation of a discretized intensive quantity between two meshes. In this article, we propose a novel multi-material flux remapping method that avoids the geometric computation of mesh-mesh intersections needed for an accurate intersection based remap. The flux remap is applicable to scalar quantities such as material density describing the multi-material flow between meshes with the same connectivity but small mesh displacements. Herein, the method is described for two- and three-dimensional polygonal/polyhedral meshes as it is implemented in Portage. Another open source library, Tangram, is used to calculate material interfaces in cells containing more than one material. Performance and accuracy of the flux remap are discussed with respect to Arbitrary Lagrangian-Eulerian simulations and compared to an accurate intersection based remap. In particular, cyclic remapping shows that the accuracy of the flux remap is limited to first order on material boundaries while maintaining second order accuracy in pure material regions.

97 MATHEMATICS AND COMPUTING↗

Moments-based interface reconstruction, remap and advection

We present a new moment-of-fluid (MOF 2 ) interface reconstruction method. It uses the zeroth, first, and second moments of the fragment of material inside a cell of the mesh to reconstruct a convex material polygon or a union of convex polygons that approximate the respective material fragment. The new method requires information about the material moments only for the cell under consideration. Furthermore, the MOF 2 method allows to exactly reproduce several convex shapes: corners, filaments, and some concave shapes: cell-complements to corners and filaments.

97 MATHEMATICS AND COMPUTING↗

Conservative remapping of material-dependent fields between possibly misaligned material regions

In this work, we propose an interpolation or remapping algorithm of material-dependent fields on polyhedral meshes where any source or target cell contains only one material. It is conservative and it preserves sharp material boundaries on the target mesh, even if the source and target regions delineating the same material are slightly misaligned. If those material regions are aligned, then the algorithm is also linearity-preserving and bounds-preserving. For a given material, it consists of a conservative field reconstruction on a target mesh part from a source mesh part associated with that material, followed by a repair step in case of misaligned boundaries. No assumption is made regarding the topology of the input meshes

36 MATERIALS SCIENCE↗

Portage: A Modular Data Remap Library for Multiphysics Applications on Advanced Architectures

Portage is a scalable and extensible remap library for numerical simulations. It supports state-of-the-art remap schemes for meshes and particles in 2D and 3D up to a second-order accuracy. Portage ensures critical properties such as local/global conservation and bounds preservation for mesh remap. It enables multi-material field remap through a dedicated plugin, and leverages the hybrid parallelism exposed by advanced architectures using multi-processing and multi-threading.

97 MATHEMATICS AND COMPUTING↗

The Ristra Project: FY20/21 Milestone Report

The ASC Advanced Technology Development and Mitigation (ATDM) sub-program was established in 2014 to develop new simulation tools operating on exascale-class computers to serve NNSA (see Appendix B). Over the course of ATDM, LANL management have set a strategy for exascale-class application codes that follows two supportive and mutually risk-mitigating paths: evolution for established production integrated design codes (IDCs) – with a strong pedigree within the user community – based upon existing programming paradigms(MPI+X); and a new start ATDM project, Ristra, a high-risk/high-reward push for a next-generation multi-physics, multi-scale simulation toolkit based on emerging advanced programming systems(with an initial focus on data-flow task-based models exemplified by Legion). The role of Ristra as the high-risk/high-reward path for LANL’s codes was fully consistent with the goals of ATDM as described in Appendix B, in particular its emphasis on evolving ASC capabilities through novel computing programming models and computing technologies.

97 MATHEMATICS AND COMPUTING↗

A higher order approximate static condensation method for multi-material diffusion problems

The paper studies an approximate static condensation method for the diffusion problem with discontinuous diffusion coefficients. The method allows for a general polygonal mesh which is unfitted to the material interfaces. Moreover, the interfaces can be discontinuous across the mesh edges as typical for numerical reconstructions using the volume or moment-of-fluid methods. We apply a mimetic finite difference method to solve local diffusion problems and use P 1 (mortar) edge elements to couple local problems into the global system. The condensation process and the properties of the resulting algebraic system are discussed. It is demonstrated that the method is second order accurate on smooth solutions and performs well for problems with high contrast in diffusion coefficients. Experiments also show the robustness with respect to position of the material interfaces against the underlying mesh.

97 MATHEMATICS AND COMPUTING↗

Establishing mesh topology in multi-material cells: enabling technology for robust and accurate multi-material simulations

Real world problems are typically multi-material, combining materials such as gases, liquids and solids that have very different properties. The material interfaces may be fixed in time or can be a part of the solution, as in fluid-structure interactions or air-water dynamics, and therefore move and change shape. In such problems the computational mesh may be non-conformal to interfaces due to complexity of these interfaces, presence of small fractions of materials, or because the mesh does not move with the flow, as in the arbitrary Lagrangian–Eulerian (ALE) methods. In order to solve problems of interest on such meshes, interface reconstruction methods are usually used to recover an approximation of material regions within the cells. For a cell intersecting multiple material regions, these approximations of contained subregions can be considered as single-material subcells in a local mesh that we call a minimesh. In this paper, we discuss some of the requirements that discretization methods have on topological information in the resulting hierarchical meshes and present an approach that allows incorporating the buildup of sufficiently detailed topology into the nested dissections based PLIC-type reconstruction algorithms (e.g. Volume-of-Fluid, Moment-of-Fluid) in an efficient and robust manner. Specifically, we describe the X-MOF interface reconstruction algorithm in 2D, which extends the Moment-Of-Fluid (MOF) method to include the topology of minimeshes created inside of multi-material cells and parent-child relations between corresponding mesh entities on different hierarchy levels. X-MOF retains the property of being local to a cell and not requiring external communication, which makes it suitable for massively parallel applications. Here, we demonstrate some scaling results for the X-MOF implementation in Tangram, a modern interface reconstruction framework for exascale computing.

97 MATHEMATICS AND COMPUTING↗

Ristra Milestone Review

This report describes the Portage remap and link package and the Ristra project.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Approximate static condensation algorithm for solving multi-material diffusion problems on meshes non-aligned with material interfaces

In this study, we describe a new algorithm for solving multi-material diffusion problem when material interfaces are not aligned with the mesh. In this case interface reconstruction methods are used to construct approximate representation of interfaces between materials. They produce so-called multi-material cells, in which materials are represented by material polygons that contain only one material. The reconstructed interface is not continuous between cells. Finally, we suggest the new method for solving multi-material diffusion problems on such meshes and compare its performance with known homogenization methods.

36 MATERIALS SCIENCE↗