Search NASA⌕ Search

Engineering topics

Kim, D. S.

Publications and source records attributed to Kim, D. S..

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Nonharmonic contributions to the high-temperature phonon thermodynamics of Cr

Here, phonon densities of states (DOSs) of body-centered cubic chromium were measured by time-of-flight inelastic neutron scattering at temperatures up to 1493 K. Density functional theory calculations with both quasiharmonic (QH) and anharmonic (AH) methods were performed at temperatures above the Néel temperature. Features in the phonon DOSs decrease in energy (soften) substantially with temperature. A Born–von Kármán analysis using fits to the experimental DOSs reveals a softening of almost 17% of the high-transverse phonon branch between 330 and 1493 K. The low-transverse branch changes by approximately half this amount. The AH calculations capture the observed behavior of the two transverse phonon branches, but the QH calculations give some inverted trends. Vibrational entropies from phonons and electrons are obtained, and their sum is in excellent agreement with the entropy of chromium obtained by calorimetry, indicating that above 330 K, no explicit temperature-dependent magnetic contributions are necessary.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Thermal expansion and phonon anharmonicity of cuprite studied by inelastic neutron scattering and ab initio calculations

Inelastic neutron scattering measurements were performed with a time-of-flight chopper spectrometer to observe phonons in all parts of the Brillouin zone of a single crystal of cuprite Cu 2 O. We reduced the experimental data to phonon dispersions in the high-symmetry directions, and changes between 10 and 300 K are reported. In this paper, we show ab initio quasiharmonic (QH) and anharmonic (AH) calculations of phonon dispersions. We performed all AH calculations with a temperature-dependent effective potential method. Both QH and AH calculations account for the small negative thermal expansion of cuprite at low temperatures. However, the measured temperature-dependent phonon behavior was predicted more accurately with the AH calculations than the QH ones. Nevertheless, at 300 K, the cubic AH used in this paper did not entirely account for the experimental phonon dispersions in cuprite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Evaluation of Material Balance Approaches for Hanford Direct-Feed Low Activity Waste Processing - 20022

The Hanford Site has accumulated millions of gallons of tank waste from reprocessing spent fuel to recover plutonium, uranium, cesium, and strontium. The supernatant from the accumulated tank waste will be treated using a Direct Feed Low-Activity Waste approach. The supernatant will be treated to remove solids and cesium in the Tank-Side Cesium Removal process in the Hanford tank farm, then vitrified in a semi-batch process in the Hanford Waste Treatment and Immobilization Plant (WTP). Currently, each batch of feed is sampled at three locations prior to being fed to the melter: the feed qualification tank in the Hanford tank farm as well as the concentrate receipt vessel (CRV) and melter feed preparation vessel (MFPV) in the WTP. The feed qualification sample is taken from a large batch of accumulated feed, only two to three samples are expected each year. Approximately 275 samples from the CRVs and 1100 samples from the MFPV are expected each year. An evaluation was performed to determine if a material balance based on the feed qualification sample could replace most of the sampling in the CRVs and MFPVs. The evaluation consisted of three elements: (1) determination of the practicality of using a material balance to estimate the stream composition of the CRV and MFPV contents, (2) evaluation of whether the material balance could be automated using the existing process control system, and (3) determination of the uncertainty in glass composition using the material balance approach. It is assumed that periodic sampling at the CRV and MFPV would be performed periodically to re-baseline the material balance, evaluations are in progress to determine the frequency of this periodic sampling. Process sample locations downstream of the melter were reviewed as well, but the partitioning of semi-volatile species in the melter was determined to preclude extending the material balance approach past the melter. It was determined that replacement of the CRV sample location was feasible and did not increase process uncertainty or significantly impact waste loading. Replacement of the MFPV sample was also determined to be feasible, but that measurement of the glass former chemical addition may be needed prior to addition of these chemicals to the MFPV. This measurement could be performed by an in situ laser-induced breakdown spectroscopy (LIBS) system. Limited tests were performed to evaluate LIBS for direct measurements of the low-activity waste melter feed. The use of a material balance would eliminate over 1200 samples each year if only 10% of the CRV and MFPV batches are sampled and could likely allow the WTP laboratory to operate on days only versus 24/7 operation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1988

An efficient multilevel optimization method for engineering design

An efficient multilevel deisgn optimization technique is presented. The proposed method is based on the concept of providing linearized information between the system level and subsystem level optimization tasks. The advantages of the method are that it does not require optimum sensitivities, nonlinear equality constraints are not needed, and the method is relatively easy to use. The disadvantage is that the coupling between subsystems is not dealt with in a precise mathematical manner.

Vanderplaats, G. N.↗