Search NASA⌕ Search

Engineering topics

Kim, Haegyeom

Publications and source records attributed to Kim, Haegyeom.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Optimizing Li‐Excess Cation‐Disordered Rocksalt Cathode Design Through Partial Li Deficiency

Li-excess disordered rocksalts (DRXs) are emerging as promising cathode materials for Li-ion batteries due to their ability to use earth-abundant transition metals. In this work, a new strategy based on partial Li deficiency engineering is introduced to optimize the overall electrochemical performance of DRX cathodes. Specifically, by using Mn-based DRX as a proof-of-concept, it is demonstrated that the introduction of cation vacancies during synthesis (e.g., Li 1.3-x Mn 2+ 0.4-x Mn 3+ x Nb 0.3 O 1.6 F 0.4 , x = 0, 0.2, and 0.4) improves both the discharge capacity and rate performance due to the more favored short-range order in the presence of Mn3+. Density functional theory calculations and Monte Carlo simulations, in combination with spectroscopic tools, reveal that introducing 10% vacancies (Li 1.1 Mn 2+ 0.2 Mn 3+ 0.2 Nb 0.3 O 1.6 F 0.4 ) enables both Mn 2+ /Mn 3+ redox and excellent Li percolation. However, a more aggressive vacancy doping (e.g., 20% vacancies in Li 0.9 Mn 3+ 0.4 Nb 0.3 O 1.6 F 0.4 ) impairs performance because it induces phase separation between an Mn-rich and a Li-rich phase.

25 ENERGY STORAGE↗
DOE OSTI2022

Electronic structure manipulation via composition tuning for the development of highly conductive and acid-stable oxides

Exploring materials that simultaneously possess high conductivity and electrochemical stability is critical for various energy-conversion applications. In this study, our combined computations and experiments suggest the Mg–Ti–O chemical space for novel ternary oxide compounds offering high electrical conductivity and corrosion stability in acidic conditions to be potentially used as catalyst supporter of polymer electrolyte membrane fuel cells. High electrical conductivity (6.09 × 10 -1 S cm -1 ) is achieved at room temperature by tuning the chemical composition of Mg 1-x Ti 2+x O 5 while still maintaining good corrosion stability (1.2 × 10 -4 mA cm -2 after six days) in acidic conditions. Furthermore, we discover that a reducing gas environment during the synthesis increases the Ti solubility in Mg 1-x Ti 2+x O 5 with a reduced valence state of Ti, thus resulting in high conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Solid-State Calcium-Ion Diffusion in Ca 1.5 Ba 0.5 Si 5 O 3 N 6

Rechargeable batteries based on multivalent working ions are promising candidates for next-generation high-energy-density batteries. Development of these technologies, however, is largely limited by the low diffusion rate of multivalent ions in solid-state materials, thereby necessitating a better understanding of the design principles that control multivalent-ion mobility. We report Ca 1.5 Ba 0.5 Si 5 O 3 N 6 as a potential calcium solid-state conductor and investigate its Ca migration mechanism by means of ab initio computations and neutron diffraction. This compound contains partially occupied Ca sites in close proximity to each other, providing a unique mechanism for Ca migration. Nuclear density maps obtained with the maximum entropy method from neutron powder diffraction data provide strong evidence for low-energy percolating one-dimensional pathways for Ca-ion migration. Ab initio molecular dynamics simulations further support a low Ca-ion migration barrier of ~400 meV when Ca vacancies are present and reveal a unique "vacancy-adjacent"concerted ion migration mechanism. This work provides a new understanding of solid-state Ca-ion diffusion and insights into the future design of novel cation configurations that utilize the interactions between mobile ions to enable fast multivalent-ion conduction in solid-state materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synthetic accessibility and stability rules of NASICONs

In this paper we develop the stability rules for NASICON-structured materials, as an example of compounds with complex bond topology and composition. By first-principles high-throughput computation of 3881 potential NASICON phases, we have developed guiding stability rules of NASICON and validated the ab initio predictive capability through the synthesis of six attempted materials, five of which were successful. A simple two-dimensional descriptor for predicting NASICON stability was extracted with sure independence screening and machine learned ranking, which classifies NASICON phases in terms of their synthetic accessibility. This machine-learned tolerance factor is based on the Na content, elemental radii and electronegativities, and the Madelung energy and can offer reasonable accuracy for separating stable and unstable NASICONs. This work will not only provide tools to understand the synthetic accessibility of NASICON-type materials, but also demonstrates an efficient paradigm for discovering new materials with complicated composition and atomic structure.

25 ENERGY STORAGE↗
DOE OSTI2021

Computational and experimental search for potential polyanionic K-ion cathode materials

Discovering high-energy cathode materials is critical to construct K-ion batteries for practical applications. Owing to the great success of layered oxides in Li- and Na-ion systems, K layered cathodes have also been investigated in recent years. However, the much larger size of K + compared to Li or Na introduces strong K + –K + interaction within the layer, which results in a sloped voltage profile thereby limiting the specific capacity and operating voltage. In contrast, polyanionic materials with a three-dimensional K + arrangement can effectively mitigate K + –K + interaction. In this work, ten K polyanionic compounds with theoretical capacity >100 mA h g –1 are screened from the Inorganic Crystal Structure Database as potential cathode materials for K-ion batteries. Among the ten proposed compounds, K 2 MnP 2 O 7 , K 2 Mn 2 P 2 O 7 F 2 , K 2 Fe 2 P 2 O 7 F 2 , and K 6 V 2 (PO 4 ) 4 with average voltage <4.5 V are synthesized and evaluated electrochemically. While the re-insertion of K into these compounds is not fully reversible, it may be related to the very high migration barrier that we compute for K ions. In addition, we show the successful synthesis of a series of K 3 V 3–x Cr x (PO 4 ) 4 (x = 0, 1, 2, 3) compounds. Among these, K 3 V 2 Cr(PO 4 ) 4 exhibits the largest reversible capacity, as revealed by the in situ investigation. Lastly, we find that the redox couples in many of these compounds sit at remarkably high potential, even higher than in equivalent Li compounds, which brings both opportunities and challenges in the future research of K polyanion cathodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Review on Interface and Interphase Issues in Sulfide Solid-State Electrolytes for All-Solid-State Li-Metal Batteries

All-solid-state batteries have emerged as promising alternatives to conventional Li-ion batteries owing to their higher energy density and safety, which stem from their use of inorganic solid-state electrolytes instead of flammable organic liquid electrolytes. Among various candidates, sulfide solid-state electrolytes are particularly promising for the development of high-energy all-solid-state Li metal batteries because of their high ionic conductivity and deformability. However, a significant challenge remains as their inherent instability in contact with electrodes forms unstable interfaces and interphases, leading to degradation of the battery performance. In this review article, we provide an overview of the key issues for the interfaces and interphases of sulfide solid-state electrolyte systems as well as recent progress in understanding such interface and interphase formation and potential solutions to stabilize them. In addition, we provide perspectives on future research directions in this field.

25 ENERGY STORAGE↗
DOE OSTI2021

Toward the Development of a High-Voltage Mg Cathode Using a Chromium Sulfide Host

Development of Mg-ion batteries as advanced electrochemical energy storage systems relies on the design and discovery of high-voltage positive electrode (cathode) materials. To date, a variety of sulfide cathodes have been reported (e.g., Mg x Mo 6 S 8 , Mg x Ti 2 S4, etc.), but the voltages of these materials are too low to prepare a high energy density Mg cell. Theoretical computations predicted that Mg x Cr 2 S 4 operating with the high-voltage Cr 3+/4+ redox couple would serve as a suitable cathode candidate, but experimental attempts to extract Mg 2+ from the lattice have been largely unsuccessful. Here, we show that reversible electrochemical activity within a thiospinel framework (AB 2 S 4 ) relies on a redox-active transition metal present in the B site; otherwise, anionic redox activity triggers decomposition of the spinel structure. Since Cr and S states are highly coupled in MgCr 2 S 4 , the Cr 3+/4+ redox couple is inaccessible so that reversible (de)intercalation of Mg 2+ cannot occur and charging leads to dissolution of the active material. These findings point to an insufficiency in the screening criteria previously used to identify MgCr 2 S 4 as a promising Mg cathode. Thus, a computable descriptor based on the electronic structure of the discharged material is proposed to predict the prevalence of cation vs anion redox and improve future surveys of potential candidates. It is unlikely that the high-voltage Cr redox couple will be accessible to oxidation in the presence of sulfur within the restrictions of a spinel framework; however, it is possible that a suitable layered Mg x CrS 2 structure could serve as a reversible high-voltage Mg cathode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Toward autonomous design and synthesis of novel inorganic materials

Autonomous experimentation driven by artificial intelligence (AI) provides an exciting opportunity to revolutionize inorganic materials discovery and development. Herein, we review recent progress in the design of self-driving laboratories, including robotics to automate materials synthesis and characterization, in conjunction with AI to interpret experimental outcomes and propose new experimental procedures. We focus on efforts to automate inorganic synthesis through solution-based routes, solid-state reactions, and thin film deposition. In each case, connections are made to relevant work in organic chemistry, where automation is more common. Characterization techniques are primarily discussed in the context of phase identification, as this task is critical to understand what products have formed during synthesis. The application of deep learning to analyze multivariate characterization data and perform phase identification is examined. To achieve “closed-loop” materials synthesis and design, we further provide a detailed overview of optimization algorithms that use active learning to rationally guide experimental iterations. Lastly, we highlight several key opportunities and challenges for the future development of self-driving inorganic materials synthesis platforms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Promises and Challenges of Next-Generation “Beyond Li-ion” Batteries for Electric Vehicles and Grid Decarbonization

The tremendous improvement in performance and cost of lithium-ion batteries (LIBs) have made them the technology of choice for electrical energy storage. While established battery chemistries and cell architectures for Li-ion batteries achieve good power and energy density, LIBs are unlikely to meet all the performance, cost, and scaling targets required for energy storage, in particular, in large-scale applications such as electrified transportation and grids. The demand to further reduce cost and/or increase energy density, as well as the growing concern related to natural resource needs for Li-ion have accelerated the investigation of so-called "beyond Li-ion" technologies. In this review, we will discuss the recent achievements, challenges, and opportunities of four important "beyond Li-ion" technologies: Na-ion batteries, K-ion batteries, all-solid-state batteries, and multivalent batteries. Here, the fundamental science behind the challenges, and potential solutions toward the goals of a low-cost and/or high-energy-density future, are discussed in detail for each technology. While it is unlikely that any given new technology will fully replace Li-ion in the near future, "beyond Li-ion" technologies should be thought of as opportunities for energy storage to grow into mid/large-scale applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Origin of Capacity Degradation of High-Voltage KVPO 4 F Cathode

Potassium vanadium fluorophosphate (KVPO 4 F) is one of the most promising cathode candidates for K-ion batteries because of its high specific capacity, voltage, and energy density. However, reducing its capacity fade remains an important challenge. This work leverages structure and electrochemical analysis to understand the capacity degradation mechanism of the KVPO 4 F cathode. Interestingly, no structural degradation of the KVPO4F cathode is detected after 200 cycles in the wide voltage window of 5.0-2.5 V (vs K/K + ). Instead, the capacity degradation is attributed to electrolyte decomposition at high voltage ( > 4.5 V vs K/K + ), which causes drying of the electrolyte and the formation of insulating layers on the cathode surface, significantly increasing the polarization. The properties of four KPF 6 - A nd carbonate-based K electrolytes are compared, and 0.7 M KPF 6 in ethylene carbonate/propylene carbonate exhibits the highest oxidation stability and results in the best cycling stability for the KVPO 4 cathode. These findings suggest that the key to improving the cycling stability of KVPO 4 F is to develop novel K electrolytes with even higher oxidation stability.

25 ENERGY STORAGE↗
DOE OSTI2020

Direct Observation of Alternating Octahedral and Prismatic Sodium Layers in O3-Type Transition Metal Oxides

The oxygen stacking of O3-type layered sodium transition metal oxides (O3-NaTMO 2 ) changes dynamically upon topotactic Na extraction and reinsertion. While the phase transition from octahedral to prismatic Na coordination that occurs at intermediate desodiation by transition metal slab gliding is well understood, the structural evolution at high desodiation, crucial to achieve high reversible capacity, remains mostly uncharted. In this work, the phase transitions of O3-type layered NaTMO 2 at high voltage are investigated by combining experimental and computational approaches. An OP2-type phase that consists of alternating octahedral and prismatic Na layers is directly observed by in situ X-ray diffraction and high-resolution scanning transmission electron microscopy. The origin of this peculiar phase is explained by atomic interactions involving Jahn–Teller active Fe 4+ and distortion tolerant Ti 4+ that stabilize the local Na environment. Finally, the path-dependent desodiation and resodiation pathways are also rationalized in this material through the different kinetics of the prismatic and octahedral layers, presenting a comprehensive picture about the structural stability of the layered materials upon Na intercalation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Ultrahigh power and energy density in partially ordered lithium-ion cathode materials

There is an intensive search for high-performance cathode materials for rechargeable batteries. In this work the authors report that oxyfluorides with partial spinel-like cation order, made from earth-abundant elements, display both exceptionally high energy and power. The rapid market growth of rechargeable batteries requires electrode materials that combine high power and energy and are made from earth-abundant elements. In this paper we show that combining a partial spinel-like cation order and substantial lithium excess enables both dense and fast energy storage. Cation overstoichiometry and the resulting partial order is used to eliminate the phase transitions typical of ordered spinels and enable a larger practical capacity, while lithium excess is synergistically used with fluorine substitution to create a high lithium mobility. With this strategy, we achieved specific energies greater than 1,100 Wh kg -1 and discharge rates up to 20 A g -1 . Remarkably, the cathode materials thus obtained from inexpensive manganese present a rare case wherein an excellent rate capability coexists with a reversible oxygen redox activity. Our work shows the potential for designing cathode materials in the vast space between fully ordered and disordered compounds.

25 ENERGY STORAGE↗