Search NASA⌕ Search

Engineering topics

Kim, Hyunjeong

Publications and source records attributed to Kim, Hyunjeong.

Elucidating Primary Degradation Mechanisms in High-Cycling-Capacity, Compositionally Tunable High-Entropy Hydrides

The hydrogen sorption properties of single-phase bcc (TiVNb) 100–x Cr x alloys (x = 0–35) are reported. All alloys absorb hydrogen quickly at 25 °C, forming fcc hydrides with storage capacity depending on the Cr content. Here, a thermodynamic destabilization of the fcc hydride is observed with increasing Cr concentration, which agrees well with previous compositional machine learning models for metal hydride thermodynamics. The steric effect or repulsive interactions between Cr–H might be responsible for this behavior. The cycling performances of the TiVNbCr alloy show an initial decrease in capacity, which cannot be explained by a structural change. Pair distribution function analysis of the total X-ray scattering on the first and last cycled hydrides demonstrated an average random fcc structure without lattice distortion at short-range order. If the as-cast alloy contains a very low density of defects, the first hydrogen absorption introduces dislocations and vacancies that cumulate into small vacancy clusters, as revealed by positron annihilation spectroscopy. Finally, the main reason for the capacity drop seems to be due to dislocations formed during cycling, while the presence of vacancy clusters might be related to the lattice relaxation. Having identified the major contribution to the capacity loss, compositional modifications to the TiVNbCr system can now be explored that minimize defect formation and maximize material cycling performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Particulate matter increases beta-amyloid and activated glial cells in hippocampal tissues of transgenic Alzheimer's mouse: Involvement of PARP-1

Highlights: • Particulate matter (PM) activates PARP-1 in neuronal cells. • PM increases beta-amyloid in ex vivo hippocampus of 3xTg-AD mouse. • PM activates glial cells in ex vivo hippocampus of 3xTg-AD mouse. • Pharmacological inhibition of PARP-1 reverses PM-induced AD pathologies. • PARP-1 inhibition would be a promising approach counteracting PM's neurotoxicity. Exposure to air pollutants, such as particulate matter (PM), has been implicated in neurodegenerative disorders including Alzheimer's disease (AD). However, direct effects of PM on production of β-amyloid (Aβ), a key pathogenic molecule in AD, and its underlying mechanism are still elusive. Given PM's potential to induce oxidative stress in other tissues, we hypothesized that poly(ADP-ribose) polymerase (PARP-1) might be involved in PM-induced neurotoxicity. To address this, we used an ex vivo model of AD, the organotypic hippocampal slice tissue culture from old (12-14 months-of-age) triple transgenic 3xTg-AD mice. First, we observed that fine PM (aerodynamic diameter < 4 μm) can dose-dependently activate PARP-1 and decrease NAD{sup +} levels in Neuro2A cells. PARP-1 activation did occur under concentrations of PM which did not affect cell viability. Next, we observed that direct treatment of PM increased Aβ levels and activated glial cells in the ex vivo hippocampal tissues of 3xTg-AD mice. PM-induced glial activation was most prominent in CA1 region of the hippocampal tissue. Notably, we found that pharmacological inhibition of PARP-1 reversed both PM-induced Aβ increase and glial activation, arguing the possible involvement of PARP-1 in PM-induced AD pathogenesis. Our findings suggest that PARP-1 might be a potential molecular target, responsible for mediating negative effects of PM on the brain. Modulating PARP-1 activity could be a promising approach to prevent or alleviate PM-related environmental neurotoxicity which could initiate AD pathogenesis.

60 APPLIED LIFE SCIENCES↗

Melting of Pb Charge Glass and Simultaneous Pb-Cr Charge Transfer in PbCrO 3 as the Origin of Volume Collapse

A metal to insulator transition in integer or half integer charge systems can be regarded as crystallization of charges. The insulating state tends to have a glassy nature when randomness or geometrical frustration exists. In this paper, we report that the charge glass state is realized in a perovskite compound PbCrO 3 , which has been known for almost 50 years, without any obvious inhomogeneity or triangular arrangement in the charge system. PbCrO 3 has a valence state of Pb 2+ 0.5 Pb 4+ 0.5 Cr 3+ O 3 with Pb 2+ –Pb 4+ correlation length of three lattice-spacings at ambient condition. A pressure induced melting of charge glass and simultaneous Pb–Cr charge transfer causes an insulator to metal transition and ~10% volume collapse.

36 MATERIALS SCIENCE↗

Synthesis and structural study of Ti-rich Mg-Ti hydrides

Mg x Ti 1-x (x = 0.15, 0.25, 0.35) alloys were synthesized by means of ball milling. Under a hydrogen pressure of 8 MPa at 423 K these Mg–Ti alloys formed a hydride phase with a face centered cubic (FCC) structure. The hydride for x = 0.25 consisted of single Mg 0.25 Ti 0.75 H 1.62 FCC phase but TiH 2 and MgH 2 phases were also formed in the hydrides for x = 0.15 and 0.35, respectively. X-ray diffraction patterns and the atomic pair distribution function indicated that numbers of stacking faults were introduced. There was no sign of segregation between Mg and Ti in Mg 0.25 Ti 0.75 H 1.62 . Electronic structure of Mg 0.25 Ti 0.75 H 1.62 was different from those of MgH 2 and TiH 2 , which was demonstrated by 1 H nuclear magnetic resonance. This strongly suggested that stable Mg–Ti hydride phase was formed in the metal composition of Mg 0.25 Ti 0.75 without disproportion into MgH 2 and TiH 2 .

Asano, Kohta↗

Novel Synthesis and Structural Analysis of Ferrihydrite

Naturally occurring ferrihydrite is both impure and difficult to isolate, so the numerous applications and interesting properties of ferrihydrite have spurred the development of various synthetic techniques. Nearly all techniques are based on the hydrolysis of an iron salt and require careful control of temperature, pH, and concentration. In this Article, we report a new synthetic method which does not require such control and is perhaps the fastest and simplest route to synthesizing ferrhydrite. XRD, TEM, BET, and chemical purity characterizations show that the chemically pure, 2-line ferrihydrite product consists of crystallites 2-6 nm in diameter which aggregate to form mesoporous, high surface area agglomerates that are attractive candidates for the many adsorption applications of ferrihydrite. X-ray PDF data were also collected for the ferrihydrite product and refined against the hexagonal structural model recently proposed by Michel et al. These analyses suggest that ferrihydrite has a consistent, repeatable structure independent of variation in the synthetic method, water content of the sample, or particle size of the crystallites, and this structure can be adequately described by the proposed hexagonal model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nyquist-Shannon sampling theorem applied to refinements of the atomic pair distribution function

We have systematically studied the optimal real-space sampling of atomic pair distribution (PDF) data by comparing refinement results from oversampled and resampled data. Based on nickel and a complex perovskite system, we show that not only is the optimal sampling bounded by the Nyquist interval described by the Nyquist-Shannon (NS) sampling theorem as expected, but near this sampling interval, the data points in the PDF are minimally correlated, which results in more reliable uncertainty estimates in the modeling. Surprisingly, we find that PDF refinements quickly become unstable for data on coarser grids. Although the Nyquist-Shannon sampling theorem is well known, it has not been applied to PDF refinements, despite the growing popularity of the PDF method and its adoption in a growing number of communities. Here, we give explicit expressions for the application of NS sampling theorem to the PDF case, and establish through modeling that it is working in practice, which lays the groundwork for this to become more widely adopted. This has implications for the speed and complexity of possible refinements that can be carried out many times faster than currently with no loss of information, and it establishes a theoretically sound limit on the amount of information contained in the PDF that will prevent over-parametrization during modeling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New insight into the properties of proton conducting oxides from neutron total scattering

In recent years there has been a growing interest in searching for new proton conducting materials that could be successfully used in medium temperature solid oxide fuel cells (SOFC). In particular, proton conducting oxides have been the subject of a massive research activity. Among the most promising oxide the acceptor doped cerates appears to be those most appealing in view of practical applications. A relevant aspect of these materials is the investigation of the local distortion of the structure arising from water incorporation. This kind of study is of great help in defining how the structure changes in order to accommodate the proton which is usually thought to enter the structure in form of hydroxyl group where the oxygen vacancy results from the acceptor doping on the Ce site. Atomistic simulation work confirmed that the preferential location of dopant ions is on the Ce site. To the best of our knowledge the only experimental work addressing the role of dopant and water incorporation on the local structure of V-doped cerates is a X-ray absorption spectroscopy (XAS) work carried out by Longo and coworkers at the Y K-edge. The main conclusion of that work was the observation that Y-doping induces a distortion of the parent BaCe0{sub 3} structure resulting in a significantly distorted Y local environment. However, local structure information derived from XAS study does not provide a direct structural information and depends strongly upon the model used to calcualte theoretical {chi}(k) which is not unique. Moreover, the XAS analysis usually provide significant information only up to the second shell. As a consequence, a more reliable and useful technique to investigate the local arrangement in these proton conducting oxides appears to be the Pair Distribution Function (PDF) analysis derived from total neutron scattering measurements. In the present work we investigated the pure BaCeO{sub 3} and the acceptor doped BaCe{sub 0.90}Y{sub 0.10}O{sub 2.85} compounds. In both cases the samples have been measured at room temperature and after being exposed to dry and wet air (humidification attained through bubbling air in D{sub 2}O). Aim of this work is to look at the effect of Y-doping and water doping on the local structure of the above mentioned samples.

36 MATERIALS SCIENCE↗

Advances in total scattering analysis

In recent years the analysis of the total scattering pattern has become an invaluable tool to study disordered crystalline and nanocrystalline materials. Traditional crystallographic structure determination is based on Bragg intensities and yields the long range average atomic structure. By including diffuse scattering into the analysis, the local and medium range atomic structure can be unravelled. Here we give an overview of recent experimental advances, using X-rays as well as neutron scattering as well as current trends in modelling of total scattering data.

36 MATERIALS SCIENCE↗