Engineering topics

Kim, J.-W.

Publications and source records attributed to Kim, J.-W..

5 records

DOE OSTI2022

Emergent interlayer magnetic order via strain-induced orthorhombic distortion in the 5 d Mott insulator Sr 2 IrO 4

In this letter, we report a La 2 CuO 4 -like interlayer antiferromagnetic order in Sr2IrO4 films with large orthorhombic distortion (>1.5%). The biaxial lattice strain in epitaxial heterostructures of Sr 2 IrO 4 /Ca 3 Ru 2 O 7 lowers the crystal symmetry of Sr 2 IrO 4 from tetragonal ($C_4$) to orthorhombic ($C_2$), guiding the Ir $5d J_{text{eff}}$ = 1/2 pseudospin moment parallel to the elongated b axis via magnetic anisotropy. From resonant x-ray scattering experiments, we observed an antiferromagnetic order in the orthorhombic Sr 2 IrO 4 film whose interlayer stacking pattern is inverted from that of the tetragonal Sr 2 IrO 4 crystal. This interlayer stacking is similar to that of the orthorhombic La 2 CuO 4 , implying that the asymmetric interlayer exchange interactions between $\textit{a}$ and $\textit{b}$ directions exceed the anisotropic interlayer pseudodipolar interaction. Our result suggests that strain-induced distortion can provide a delicate knob for tuning the long-range magnetic order in quasi-two-dimensional systems by evoking the competition between the interlayer exchange coupling and the pseudodipolar interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS2016

High Volume Fraction Carbon Nanotube Composites for Aerospace Applications

Reported mechanical properties of carbon nanotubes (CNTs) at the nanoscale suggest their potential to enable significantly lighter structures of interest for space applications. However, their utility depends on the retention of these properties in bulk material formats that permit practical fabrication of large structures. This presentation summarizes recent progress made to produce carbon nanotube composites with specific tensile properties that begin to rival those of carbon fiber reinforced polymer composites. CNT content in these nanocomposites was greater than 70% by weight. Tested nanocomposite specimens were fabricated from kilometers or tens of square meters of CNT, depending on the starting material format. Processing methods to yield these results, and characterization and testing to evaluate the performance of these composites will be discussed. The final objective is the demonstration of a CNT composite overwrapped pressure vessel to be flight tested in the Fall of 2016.

Siochi, E. J.↗

NASA NTRS2012

Nanostructured Solar Irradiation Control Materials for Solar Energy Conversion

Tailoring the solar absorptivity (alpha(sub s)) and thermal emissivity (epsilon(sub T)) of materials constitutes an innovative approach to solar energy control and energy conversion. Numerous ceramic and metallic materials are currently available for solar absorbance/thermal emittance control. However, conventional metal oxides and dielectric/metal/dielectric multi-coatings have limited utility due to residual shear stresses resulting from the different coefficient of thermal expansion of the layered materials. This research presents an alternate approach based on nanoparticle-filled polymers to afford mechanically durable solar-absorptive and thermally-emissive polymer nanocomposites. The alpha(sub s) and epsilon(sub T) were measured with various nano inclusions, such as carbon nanophase particles (CNPs), at different concentrations. Research has shown that adding only 5 wt% CNPs increased the alpha(sub s) and epsilon(sub T) by a factor of about 47 and 2, respectively, compared to the pristine polymer. The effect of solar irradiation control of the nanocomposite on solar energy conversion was studied. The solar irradiation control coatings increased the power generation of solar thermoelectric cells by more than 380% compared to that of a control power cell without solar irradiation control coatings.

Kang, Jinho↗

NASA NTRS1984

The balance of kinetic and total energy simulated by the OSU two-level atmospheric general circulation model for January and July

A three-year simulation which prescribes seasonally varying solar radiation and sea surface temperature is the basis of the present study of the horizontal structure of the balances of kinetic and total energy simulated by Oregon State University's two-level atmospheric general circulation model. Mechanisms responsible for the local energy changes are identified, and the energy balance requirement's fulfilment is examined. In January, the vertical integral of the total energy shows large amounts of external heating over the North Pacific and Atlantic, together with cooling over most of the land area of the Northern Hemisphere. In July, an overall seasonal reversal is found. Both seasons are also characterized by strong energy flux divergence in the tropics, in association with the poleward transport of heat and momentum.

Wang, J.-T.↗

NASA NTRS1982

A January angular momentum balance in the OSU two-level atmospheric general circulation model

The present investigation is concerned with an analysis of the atmospheric angular momentum balance, based on the simulation data of the Oregon State University two-level atmospheric general circulation model (AGCM). An attempt is also made to gain an understanding of the involved processes. Preliminary results on the angular momentum and mass balance in the AGCM are shown. The basic equations are examined, and questions of turbulent momentum transfer are investigated. The methods of analysis are discussed, taking into account time-averaged balance equations, time and longitude-averaged balance equations, mean meridional circulation, the mean meridional balance of relative angular momentum, and standing and transient components of motion.

Kim, J.-W.↗