Engineering topics

Kim, Jin-Woo

Publications and source records attributed to Kim, Jin-Woo.

3 records

DOE OSTI2023

Modelling and analysis of salt-convection effect on oxide reduction process for uranium oxides using smoothed particle hydrodynamics

Oxygen ion transport via molten salt continuum is a key kinetic feature of electrochemical reduction process for uranium oxides in molten salt. During the electrolysis, the evolution of oxygen ion concentration field in molten salt continuum appears from porous metallic layer to open bulk salt. Despite the important role affecting process throughput, its effect coupled with controlled salt movement was not adequately investigated. To capture the reactive oxygen ion transport phenomena, a multidimensional reduction model based on smoothed particle hydrodynamics (SPH) was combined with the advection-diffusion model. A pelletized oxide fuel bed capturing interconnected salt continuum is considered as a reactant material geometry, which allows forced convective delivery of molten salt through the reactant materials with a relatively low pressure head. Here, in this study, reduction time of a pelletized-fuel bed was quantified with respect to key design parameters of the reactant material configuration. The simulation results demonstrated the advantage of salt convection which effectively removes oxygen ion products from the reactant materials and consequently accelerates the reduction process. Moreover, the reduction-time correlation of a single pelletized fuel was developed as a function of relevant dimensionless parameters and was extended to the application for a pelletized-fuel bed. Finally, several insights and implications in the use of a pelletized oxide fuel were presented. The developed SPH-based framework enabled multi-physics analysis of governing dynamics in appreciating and screening candidate reactant material configurations in a cost-effective manner.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

Smoothed particle hydrodynamics modeling and analysis of oxide reduction process for uranium oxides

A common kinetic feature for oxide reduction chemical/electrochemical processes is oxygen transport via a porous metallic layer, which has been considered as a rate-determining step for reducing uranium oxides to metallic uranium. Accounting this kinetic behavior must involve the resolution of the moving reactive interface between shrinking oxide and expanding metal phases. This study presents a numerical model using smoothed particles hydrodynamics (SPH) to effectively deal with the evolution of the shrinking core reaction interface and oxygen transport via mass transfer of lithium oxide (Li 2 O) species in multiple mass transfer domains. We successfully validated the proposed model against a theoretical derivation for the oxide reduction process handling a shrinking oxide core with molten salt and metal ash medium on a simple planar geometry. Armed with successful validation results, the model examined a realistic reactant geometry to extend the arguments beyond the one-dimensional analyses, allowing the proposed model to apply to general application scenarios with multi-dimensional geometry. Here, this study demonstrated that the proposed model could simulate and evaluate an arbitrary reaction basket design without iterative experimental trials, which is prohibitive for a scaled high-temperature molten salt study in an inert environment. The construct potentially provides not only deep insights on multiphysics behaviors governing the process dynamics but also a robust framework for evaluating and screening candidate basket designs in the most cost-effective manner.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS2011

Improved Calibration of Modeled Discharge and Storage Change in the Atchafalaya Floodplain Using SAR Interferometry

This study focuses on the feasibility of using SAR interferometry to support 2D hydrodynamic model calibration and provide water storage change in the floodplain. Two-dimensional (2D) flood inundation modeling has been widely studied using storage cell approaches with the availability of high resolution, remotely sensed floodplain topography. The development of coupled 1D/2D flood modeling has shown improved calculation of 2D floodplain inundation as well as channel water elevation. Most floodplain model results have been validated using remote sensing methods for inundation extent. However, few studies show the quantitative validation of spatial variations in floodplain water elevations in the 2D modeling since most of the gauges are located along main river channels and traditional single track satellite altimetry over the floodplain are limited. Synthetic Aperture Radar (SAR) interferometry recently has been proven to be useful for measuring centimeter-scale water elevation changes over the floodplain. In the current study, we apply the LISFLOOD hydrodynamic model to the central Atchafalaya River Basin, Louisiana, during a 62 day period from 1 April to 1 June 2008 using two different calibration schemes for Manning's n. First, the model is calibrated in terms of water elevations from a single in situ gauge that represents a more traditional approach. Due to the gauge location in the channel, the calibration shows more sensitivity to channel roughness relative to floodplain roughness. Second, the model is calibrated in terms of water elevation changes calculated from ALOS PALSAR interferometry during 46 days of the image acquisition interval from 16 April 2008 to 1 June 2009. Since SAR interferometry receives strongly scatters in floodplain due to double bounce effect as compared to specular scattering of open water, the calibration shows more dependency to floodplain roughness. An iterative approach is used to determine the best-fit Manning's n for the two different calibration approaches. Results suggest similar floodplain roughness but slightly different channel roughness. However, application of SAR interferometry provides a unique view of the floodplain flow gradients, not possible with a single gauge calibration. These gradients, allow improved computation of water storage change over the 46-day simulation period. Overall, the results suggest that the use of 2D SAR water elevation changes in the Atchafalaya basin offers improved understanding and modeling of floodplain hydrodynamics.

Jung, Hahn Chul↗