Engineering topics

Kim, Jinwook

Publications and source records attributed to Kim, Jinwook.

5 records

DOE OSTI2024

Data for Optimizing Bioenergy Sorghum Productivity and Nutrient Removal in Illinois: Impact of Nitrogen Fertilization Under Diverse Marginal Conditions

Bioenergy sorghum ( Sorghum bicolor L. Moench) is a promising crop for contributing to the United States bioenergy supply. However, the varying limitations of the marginal lands targeted for its cultivation present a management challenge. This two-year study aimed to investigate how the limitations associated with marginal cropland impact the effects of nitrogen fertilization on the yield of bioenergy sorghum and the uptake of 11 macro- (N, P, K, Ca, Mg, and S) and micronutrients (Fe, Mn, Zn, Cu, and B). The study contrasted prime cropland in central Illinois (Urbana) with three marginal cropland sites in southern (Ewing) and central Illinois (Fairbury and Pesotum). These marginal cropland sites are characterized by varying limitations, including low soil fertility (P and K limitations), leaching and erosion, and flooding, respectively. Four nitrogen rates (0, 56, 112, and 168 kg N ha−1) were tested under eight environments. The average yields and ranges of sorghum biomass were 20.2 (17.0–23.2) Mg ha−1 in Urbana, 18.1 (13.1–19.8) Mg ha−1 in Ewing, 13.8 (9.0–17.3) Mg ha−1 in Fairbury, and 23.3 (14.6–33.0) Mg ha−1 in Pesotum. Optimal N rates were 56 N in Pesotum and 112 N in Urbana, Ewing, and Fairbury. Tissue macronutrient contents in Urbana were generally higher than in the marginal croplands, while micronutrient contents did not show discernible trends. Increasing N rate generally correlated with the macronutrient removal except in Ewing. Comparable sorghum biomass yields were observed between prime and marginal croplands (averaging 18.3 Mg ha−1), but optimal N rates varied between 56 N and 112 N. This suggests that yield gaps can be narrowed by applying the optimal N rates for the respective locations. However, increased removals of macronutrients, especially P and K, with increasing yields indicate the need to revise fertilizer recommendations, particularly for soils deficient in these nutrients. Our study suggests that while sorghum production on marginal cropland is feasible, N management needs to be adapted to the unique limitations associated with various types of marginal cropland.

Biomass Analytics↗

DOE OSTI2024

Optimizing bioenergy sorghum productivity and nutrient removal in Illinois: Impact of nitrogen fertilization under diverse marginal conditions

Bioenergy sorghum (Sorghum bicolor L. Moench) is a promising crop for contributing to the United States bioenergy supply. However, the varying limitations of the marginal lands targeted for its cultivation present a management challenge. This two-year study aimed to investigate how the limitations associated with marginal cropland impact the effects of nitrogen fertilization on the yield of bioenergy sorghum and the uptake of 11 macro- (N, P, K, Ca, Mg, and S) and micronutrients (Fe, Mn, Zn, Cu, and B). The study contrasted prime cropland in central Illinois (Urbana) with three marginal cropland sites in southern (Ewing) and central Illinois (Fairbury and Pesotum). These marginal cropland sites are characterized by varying limitations, including low soil fertility (P and K limitations), leaching and erosion, and flooding, respectively. Four nitrogen rates (0, 56, 112, and 168 kg N ha –1 ) were tested under eight environments. The average yields and ranges of sorghum biomass were 20.2 (17.0–23.2) Mg ha –1 in Urbana, 18.1 (13.1–19.8) Mg ha –1 in Ewing, 13.8 (9.0–17.3) Mg ha –1 in Fairbury, and 23.3 (14.6–33.0) Mg ha –1 in Pesotum. Optimal N rates were 56 N in Pesotum and 112 N in Urbana, Ewing, and Fairbury. Tissue macronutrient contents in Urbana were generally higher than in the marginal croplands, while micronutrient contents did not show discernible trends. Increasing N rate generally correlated with the macronutrient removal except in Ewing. Comparable sorghum biomass yields were observed between prime and marginal croplands (averaging 18.3 Mg ha –1 ), but optimal N rates varied between 56 N and 112 N. This suggests that yield gaps can be narrowed by applying the optimal N rates for the respective locations. However, increased removals of macronutrients, especially P and K, with increasing yields indicate the need to revise fertilizer recommendations, particularly for soils deficient in these nutrients.

09 BIOMASS FUELS↗

NASA NTRS2016

A Piezoelectric Shear Stress Sensor

In this paper, a piezoelectric sensor with a floating element was developed for shear stress measurement. The piezoelectric sensor was designed to detect the pure shear stress suppressing effects of normal stress generated from the vortex lift-up by applying opposite poling vectors to the: piezoelectric elements. The sensor was first calibrated in the lab by applying shear forces and it showed high sensitivity to shear stress (=91.3 +/- 2.1 pC/Pa) due to the high piezoelectric coefficients of PMN-33%PT (d31=-1330 pC/N). The sensor also showed almost no sensitivity to normal stress (less than 1.2 pC/Pa) because of the electromechanical symmetry of the device. The usable frequency range of the sensor is 0-800 Hz. Keywords: Piezoelectric sensor, shear stress, floating element, electromechanical symmetry

Kim, Taeyang↗

NASA NTRS2015

Shear Stress Sensing with Elastic Microfence Structures

In this work, elastic microfences were generated for the purpose of measuring shear forces acting on a wind tunnel model. The microfences were fabricated in a two part process involving laser ablation patterning to generate a template in a polymer film followed by soft lithography with a two-part silicone. Incorporation of a fluorescent dye was demonstrated as a method to enhance contrast between the sensing elements and the substrate. Sensing elements consisted of multiple microfences prepared at different orientations to enable determination of both shear force and directionality. Microfence arrays were integrated into an optical microscope with sub-micrometer resolution. Initial experiments were conducted on a flat plate wind tunnel model. Both image stabilization algorithms and digital image correlation were utilized to determine the amount of fence deflection as a result of airflow. Initial free jet experiments indicated that the microfences could be readily displaced and this displacement was recorded through the microscope.

Cisotto, Alexxandra↗

NASA NTRS2004

Role of microbes in the smectite-to-illite reaction

Temperature, pressure, and time have been thought to control the smectite-to-illite (S-I) reaction, an important diagenetic process used for petroleum exploration. We demonstrated that microorganisms can promote the S-I reaction by dissolving smectite through reduction of structural Fe(III) at room temperature and 1 atmosphere within 14 days. This reaction typically requires conditions of 300 degrees to 350 degrees C, 100 megapascals, and 4 to 5 months in the absence of microbial activity. These results challenge the conventional concept of the S-I reaction and of reaction kinetic models.

Minerals/chemistry/metabolism↗