Search NASA⌕ Search

Engineering topics

Kim, Keehoon

Publications and source records attributed to Kim, Keehoon.

32 records · Page 2

Improved Parametric Models for Explosion Pressure Signals Derived From Large Datasets

Accurate recording and characterization of explosion-induced pressure signals are key components of the forensic analysis of explosion events in the atmosphere. Parametric overpressure models based on several key waveform features (peak overpressure, positive pulse duration, and impulse) are widely used to estimate explosion energy in terms of trinitrotoluene equivalent yield. However, those models are often developed by a limited dataset, including only a few events or recordings at relatively short propagation distances. Here, we develop empirical waveform-parameter models based on a regression analysis of a large set of data curated from four chemical explosion experiments including 16 detonations. We measured peak overpressure and impulse for positive and negative phases from 1000 pressure signals recorded at local ranges (<20 km) with scaled distance up to 8000 m/kg 1/3 . Additionally, the measured waveform parameters showed large variation with respect to observing distances indicating the effects of atmospheric propagation. In this study, a second-order polynomial model was used in a least-squares regression to account for those propagation effects and to improve data fitting. In addition to model parameters for waveform features, we also determined range-dependent model uncertainties based on data variance. The model uncertainty represents the prediction error of our models and can be critical to evaluating the uncertainty of yield estimate.

58 GEOSCIENCES↗

Acoustic Explosion Data Archive for Machine Learning

The prompt detection of explosions is a key element of the nuclear non-proliferation mission. With traditional sensors being limited in number and scale, smartphones as compact and economical multi-modal sensors are gaining traction and are being deployed. To address the flood of heterogeneous smartphone data, our team proposes a feature extraction using standardized constant-Q frequency bands across acoustic, barometric, and accelerometer data. The work in this presentation contains data collected at Idaho National Laboratory during planned detonations.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

Seismoacoustic Analysis of Chemical Explosions at the Nevada National Security Site

In recent years, two sets of chemical explosions have been conducted at the Nevada National Security Site (NNSS): 6 explosions from Phase I of the Source Physics Experiment (SPE) and 4 explosions from the Forensics Surface Events (FSE). We have estimated the explosive yield and depth-of-burial/height-of-burst of both from the synthesis of seismic and low-frequency acoustic data. Analysis of the seismic signal is performed using a waveform envelope technique. Using seismic data only, however, there is a tradeoff between the yield and depth or height of the explosion, which becomes especially acute for near-surface events. This tradeoff between yield and depth/height can be broken by including complementary analysis of the acoustic signal using the acoustic waveform inversion method. The acoustic signal also has a strong tradeoff between a yield and depth/height, but the slope is opposite that of the seismic for near-surface events. We use a likelihood function to combine the seismic and acoustic analysis and improve our estimates of yield and depth/height for these sets of explosions. The results are generally consistent with the known parameters, but can be improved upon by higher-frequency seismic analysis and improved acoustic impulse scaling for large scaled depths-of-burial. These events serve as prime examples of data fusion from multiple data streams. The challenge will be to apply the method to events at longer regional distances where the seismic signals will include phases traveling in the upper mantle, and the acoustic signals will be recorded as infrasound signals, which are subject to atmospheric variability.

58 GEOSCIENCES↗

Acoustic Source Parameters and Yield Estimation for SPE Phase I and Forensics Surface Events

Acoustic signals recorded for explosive events are sensitive to pressure changes in the source region and can provide valuable information about source characteristics. However, acoustic wave propagation in the atmosphere is significantly affected by weather conditions (e.g., temperature, pressure, and wind), and the atmospheric propagation effects should be considered properly to obtain accurate source information. Acoustic waveform inversion method has been increasing useful to determine quantitative source parameters by incorporating accurate Green’s function into the inversion and by effectively removing propagation path effects. This paper reviews recent progress in the acoustic waveform inversion and its application to explosion yield/emplacement (e.g., height-of-burst or depth-of-burial) estimation. The inversion method is applied to acoustic signals recorded during Source Physics Experiment Phase I and Forensics Surface Event conducted at the Nevada National Security Site (NNSS). Inverted acoustic source strengths are related to the explosion yield and emplacement, and their estimation uncertainties are explored by the comparison with the ground-truth data.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Uncertainty analysis for infrasound waveform inversion: Application to explosion yield estimation

While the acoustic waveform inversion method is increasingly used in geophysical acoustics to constrain source parameters, the inversion results are often provided without any uncertainty analysis. Here, this study presents a probabilistic representation for acoustic waveform inversion and method to evaluate the inversion uncertainty using ground-truth data. A posteriori probability distribution of source estimate is described by a priori waveform misfit covariance and the variance of acoustic source model. The probabilistic framework is applied to local explosion infrasound to estimate the yields of explosions and uncertainty. Estimated yields showed overall good agreement with the true yields (less than 25% errors). The uncertainty of the estimated yield is represented by the sum of the waveform inversion uncertainty and source model uncertainty. It is shown that the yield uncertainty attributed to local infrasound inversion (within 10 km) is as small as the uncertainty caused by 10% prediction errors in the acoustic source model. Finally, these results indicate that the acoustic source model uncertainty should also be considered for accurate yield estimation and that local infrasound can be a valuable tool to understand the magnitude of the source uncertainty.

58 GEOSCIENCES↗

Local Infrasound Variability Related to In Situ Atmospheric Observation

Abstract Local infrasound is widely used to constrain source parameters of near‐surface events (e.g., chemical explosions and volcanic eruptions). While atmospheric conditions are critical to infrasound propagation and source parameter inversion, local atmospheric variability is often ignored by assuming homogeneous atmospheres, and their impact on the source inversion uncertainty has never been accounted for due to the lack of quantitative understanding of infrasound variability. We investigate atmospheric impacts on local infrasound propagation by repeated explosion experiments with a dense acoustic network and in situ atmospheric measurement. We perform full 3‐D waveform simulations with local atmospheric data and numerical weather forecast model to quantify atmosphere‐dependent infrasound variability and address the advantage and restriction of local weather data/numerical weather model for sound propagation simulation. Numerical simulations with stochastic atmosphere models also showed nonnegligible influence of atmospheric heterogeneity on infrasound amplitude, suggesting an important role of local turbulence.

58 GEOSCIENCES↗

Eruption mass estimation using infrasound waveform inversion and ash and gas measurements: Evaluation at Sakurajima Volcano, Japan [Comparison of eruption masses at Sakurajima Volcano, Japan calculated by infrasound waveform inversion and ground-based sampling]

Eruption mass and mass flow rate are critical parameters for determining the aerial extent and hazard of volcanic emissions. Infrasound waveform inversion is a promising technique to quantify volcanic emissions. Although topography may substantially alter the infrasound waveform as it propagates, advances in wave propagation modeling and station coverage permit robust inversion of infrasound data from volcanic explosions. The inversion can estimate eruption mass flow rate and total eruption mass if the flow density is known. However, infrasound-based eruption flow rates and mass estimates have yet to be validated against independent measurements, and numerical modeling has only recently been applied to the inversion technique. Furthermore we present a robust full-waveform acoustic inversion method, and use it to calculate eruption flow rates and masses from 49 explosions from Sakurajima Volcano, Japan.

58 GEOSCIENCES↗

Analysis of gas jetting and fumarole acoustics at Aso Volcano, Japan

The gas-thrust region of a large volcanic eruption column is predominately a momentum-driven, fluid flow process that perturbs the atmosphere and produces sound akin to noise from jet and rocket engines, termed “jet noise”. In this paper, we aim to enhance understanding of large-scale volcanic jets by studying an accessible, less hazardous fumarolic jet. We characterize the acoustic signature of ~ 2.5-meter wide vigorously jetting fumarole at Aso Volcano, Japan using a 5-element infrasound array located on the nearby crater. The fumarole opened on 13 July 2015 on the southwest flank of the partially collapsed pyroclastic cone within Aso Volcano's Naka-dake crater and had persistent gas jetting, which produced significant audible jet noise. The array was ~ 220 m from the fumarole and 57.6° from the vertical jet axis, a recording angle not typically feasible in volcanic environments. Array processing is performed to distinguish fumarolic jet noise from wind. Highly correlated periods are characterized by sustained, low-amplitude signal with a 7–10 Hz spectral peak. Finite difference time domain method numerical modeling suggests the influence of topography near the vent and along the propagation path significantly affects the spectral content, complicating comparisons with laboratory jet noise. The fumarolic jet has a low estimated Mach number (0.3 to 0.4) and measured temperature of ~ 260 °C. The Strouhal number for infrasound from volcanic jet flows and geysers is not known; thus we assume a peak Strouhal number of 0.19 based on pure-air laboratory jet experiments. This assumption leads to an estimated exit velocity of the fumarole of ~ 79 to 132 m/s. Finally, using published gas composition data from 2003 to 2009, the fumarolic vent area estimated from thermal infrared images, and estimated jet velocity, we estimate total volatile flux at ~ 160–270 kg/s (14,000–23,000 t/d).

58 GEOSCIENCES↗

Analysis of MINIE2013 Explosion Air-Blast Data

We report analysis of air-blast overpressure measurements from the MINIE2013 explosive experiments. The MINIE2013 experiment involved a series of nearly 70 near-surface (height-ofburst, HOB, ranging from -1 to +4 m) low-yield (W=2-20 kg TNT equivalent) chemical highexplosives tests that were recorded at local distances (230 m – 28.5 km). Many of the W and HOB combinations were repeated, allowing for quantification of the variability in air-blast features and corresponding yield estimates. We measured canonical signal features (peak overpressure, impulse per unit area, and positive pulse duration) from the air-blast data and compared these to existing air-blast models. Peak overpressure measurements showed good agreement with the models at close ranges but tended to attenuate more rapidly at longer range (~ 1 km), which is likely caused by upward refraction of acoustic waves due to a negative vertical gradient of sound speed. We estimated yields of the MINIE2013 explosions using the Integrated Yield Determination Tool (IYDT). Errors of the estimated yields were on average within 30% of the reported yields, and there were no significant differences in the accuracy of the IYDT predictions grouped by yield. IYDT estimates tend to be lower than ground truth yields, possibly because of reduced overpressure amplitudes by upward refraction. Finally, we report preliminary results on a development of a new parameterized air-blast waveform.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗