Search NASA⌕ Search

Engineering topics

Kim, Kwangsoo

Publications and source records attributed to Kim, Kwangsoo.

KRT18 as a Novel Biomarker of Urothelial Papilloma while Evaluating Low-Grade Papillary Urothelial Neoplasms: Bi-Center Analysis

Introduction: Although urothelial papilloma (UP) is an indolent papillary neoplasm that can mimic the morphology of low-grade papillary urothelial carcinoma (PUC), there is no immunomarker to differentiate reliably these two entities. In addition, the molecular characteristics of UP are not fully understood. Methods: We conducted an in-depth proteomic analysis of papillary urothelial lesions (n = 31), including UP and PUC along with normal urothelium. Protein markers distinguishing UP and PUC were selected with machine learning analysis, followed by internal and external validation using immunohistochemistry. Results: In the proteomic analysis, UP and PUC showed overlapping proteomic profiles. Here, we identified EHD4 and KRT18 as candidate diagnostic biomarkers of UP. Through immunohistochemical validation in two independent cohorts (n = 120), KRT18 was suggested as a novel UP diagnostic marker, able to differentiate UP from low-grade PUC. We also found that 3.5% of patients with UP developed urothelial carcinoma in subsequent resections, supporting the malignant potential of UP. KRT18 downregulation was significantly associated with UPs subsequently progressing to urothelial carcinoma, following their initial diagnosis. Conclusion: This is the first study that successfully revealed UPs comprehensive proteomic landscape, while it also identified KRT18 as a potential diagnostic biomarker of UP.

Biomarkers↗

Vector Electrometry in a Wide-Gap-Semiconductor Device Using a Spin-Ensemble Quantum Sensor

Nitrogen-vacancy (N-V) centers in diamond work as a quantum electrometer. Using an ensemble state of N-V centers, we propose vector electrometry and demonstrate measurements in a diamond electronic device. A transverse electric field applied to the N-V axis under a high voltage is measured, while applying a transverse magnetic field. The response of the energy-level shift against the electric field is significantly enhanced compared with that against an axial magnetic field. Repeating the measurement of the transverse electric field for multiple N-V axes, our team obtains the components of the electric field generated in the device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Etch mechanism of In{sub 2}O{sub 3} and SnO{sub 2} thin films in HBr-based inductively coupled plasmas

The investigations of etch characteristics and mechanisms for both In{sub 2}O{sub 3} and SnO{sub 2} thin films in the HBr-based inductively coupled plasmas were carried out. The etch rates were measured as functions of gas mixing ratio (0%-100% Ar), input power (400-700 W), and gas pressure (4-10 mTorr) at fixed bias power (200 W) and gas flow rate [40 SCCM (SCCM denotes cubic centimeter per minute at STP)]. Plasma parameters and composition were determined using a combination of plasma diagnostics by double Langmuir probe and global (zero-dimensional) plasma model. The correlations between the behaviors of etch rates and fluxes of plasma active species allow one to infer both In{sub 2}O{sub 3} and SnO{sub 2} etch mechanisms as the transitional regime of ion-assisted chemical reaction, which is controlled by neutral and charged fluxes together.

36 MATERIALS SCIENCE↗

Etching characteristics and mechanism of indium tin oxide films in an inductively coupled HBr/Ar plasma

The investigations of etch characteristics and mechanisms for indium tin oxide (In{sub 2}O{sub 3}){sub 0.9}:(SnO{sub 2}){sub 0.1} (ITO) thin films using HBr/Ar inductively coupled plasma were carried out. The ITO etch rate was measured in the range of 0%-100% Ar in the HBr/Ar mixture at fixed gas pressure (6 mTorr), input power (700 W), and bias power (200 W). Plasma parameters and composition were examined with a combination of plasma diagnostics by double Langmuir probe and global (zero-dimensional) plasma model. It was found that the ITO etch rate follows the behavior of Br atom flux but contradicts with that for H atoms and positive ions. This suggests that the ITO etch process is not limited by the ion-surface interaction kinetics and appears in the reaction-rate-limited etch regime with the Br atoms as the main chemically active species.

36 MATERIALS SCIENCE↗