Search NASA⌕ Search

Engineering topics

Kim, S

Publications and source records attributed to Kim, S.

107 records · Page 6

PLANNING TOOLS FOR ESTIMATING RADIATION EXPOSURE AT THE NATIONAL IGNITION FACILITY

A set of computational tools was developed to help estimate and minimize potential radiation exposure to workers from material activation in the National Ignition Facility (NIF). AAMI (Automated ALARA-MCNP Interface) provides an efficient, automated mechanism to perform the series of calculations required to create dose rate maps for the entire facility with minimal manual user input. NEET (NIF Exposure Estimation Tool) is a web application that combines the information computed by AAMI with a given shot schedule to compute and display the dose rate maps as a function of time. AAMI and NEET are currently used as work planning tools to determine stay-out times for workers following a given shot or set of shots, and to help in estimating integrated doses associated with performing various maintenance activities inside the target bay. Dose rate maps of the target bay were generated following a low-yield 10{sup 16} D-T shot and will be presented in this paper.

42 ENGINEERING↗

Genesis and evolution of surface species during Pt atomic layer deposition on oxide supports characterized by in-situ XAFS analysis and water-gas shift reaction.

Platinum atomic layer deposition (ALD) using MeCpPtMe{sub 3} was employed to prepare high loadings of uniform-sized, 1-2 nm Pt nanoparticles on high surface area Al{sub 2}O{sub 3}, TiO{sub 2}, and SrTiO{sub 3} supports. X-ray absorption fine structure was utilized to monitor the changes in the Pt species during each step of the synthesis. The temperature, precursor exposure time, treatment gas, and number of ALD cycles were found to affect the Pt particle size and density. Lower-temperature MeCpPtMe{sub 3} adsorption yielded smaller particles due to reduced thermal decomposition. A 300 C air treatment of the adsorbed MeCpPtMe{sub 3} leads to PtO. In subsequent ALD cycles, the MeCpPtMe{sub 3} reduces the PtO to metallic Pt in the ratio of one precursor molecule per PtO. A 200 C H{sub 2} treatment of the adsorbed MeCpPtMe{sub 3} leads to the formation of 1-2 nm, metallic Pt nanoparticles. During subsequent ALD cycles, MeCpPtMe{sub 3} adsorbs on the support, which, upon reduction, yields additional Pt nanoparticles with a minimal increase in size of the previously formed nanoparticles. The catalysts produced by ALD had identical water-gas shift reaction rates and reaction kinetics to those of Pt catalysts prepared by standard solution methods. ALD synthesis of catalytic nanoparticles is an attractive method for preparing novel model and practical catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NEW DEBRIS DISK CANDIDATES AROUND 49 NEARBY STARS

We present 49 new candidate debris disks that were detected around nearby stars with the Spitzer Space Telescope using the Multiband Imaging Photometer (MIPS) at 24 {mu}m (MIPS24) and 70 {mu}m (MIPS70). The survey sample was composed of stars within 25 pc of the Sun that were not previously observed by any other MIPS survey. Only stars with V < 9 were selected, corresponding to spectral types earlier than M0. MIPS24 integration times were chosen to detect the stellar photosphere at 10{sigma} levels or better. MIPS70 observations were designed to detect excess infrared emission from any star in the MIPS70 sample with a disk as luminous at that around {epsilon} Eridani. The resulting sample included over 436 nearby stars that were observed with both MIPS24 and MIPS70, plus an additional 198 observed only with MIPS24. Debris disk candidates were defined as targets where excess emission was detected at 3{sigma} levels or greater, and the ratio of observed flux density to expected photosphere emission was three standard deviations or more above the mean value for the sample. The detection rate implied by the resulting 29 MIPS24 candidates is 4.6%. A detection rate of 4.8% is implied by 21 MIPS70 candidates. The distribution of spectral types for stars identified as candidates resembles that of the general sample and yields strong evidence that debris-disk occurrence does not decrease for K dwarfs. Modeling of non-uniform sensitivity in the sample is required to interpret quantitative estimates of the overall detection frequency and will be presented in a future work.

79 ASTRONOMY AND ASTROPHYSICS↗

Dependence of Pentacene Crystal Growth on Dielectric Roughness for Fabrication of Flexible Field-Effect Transistors

The dependence of pentacene nanostructures on gate dielectric surfaces were investigated for flexible organic field-effect transistor (OFET) applications. Two bilayer types of polymer/aluminum oxide (Al{sub 2}O{sub 3}) gate dielectrics were fabricated on commercial Al foils laminated onto a polymer back plate. Some Al foils were directly used as gate electrodes, and others were smoothly polished by an electrolytic etching. These Al surfaces were then anodized and coated with poly({alpha}-methyl styrene) (PAMS). For PAMS/Al{sub 2}O{sub 3} dielectrics onto etched Al foils, surface roughness up to 1 nm could be reached, although isolated dimples with a lateral diameter of several micrometers were still present. On PAMS/Al{sub 2}O{sub 3} dielectrics (surface roughness >40 nm) containing mechanical grooves of Al foil, average hole mobility ({mu}FET) of 50 nm thick pentacene-FETs under the low operating voltages (|V| < 6 V) was {approx}0.15 cm{sup 2} V{sup -1} s{sup -1}. In contrast, pentacene-FETs employing the etched Al gates exhibited {mu}FET of 0.39 cm{sup 2} V{sup -1} s{sup -1}, which was comparable to that of reference samples with PAMS/Al{sub 2}O{sub 3} dielectrics onto flat sputtered Al gates. Conducting-probe atomic force microscopy and two-dimensional X-ray diffraction of pentacene films with various thicknesses revealed different out-of-plane and in-plane crystal orderings of pentacene, depending on the surface roughness of the gate dielectrics.

36 MATERIALS SCIENCE↗

Local Spin-coupled Distortions in Multiferroic Hexagonal HoMnO3

Local structural measurements have been performed on hexagonal HoMnO{sub 3} in order to ascertain the specific changes in bond distances, which accompany magnetic ordering transitions. The transition from the paramagnetic to the antiferromagnetic (noncollinear) phase near -70 K is dominated by changes in the a-b plane Mn-Mn bond distances. The spin rotation transition near -40 K involves both Mn-Mn and nearest-neighbor Ho-Mn interactions while the low-temperature transition below 10 K involves all interactions, Mn-Mn, Ho-Mn (nearest and next nearest), and Ho-Ho correlations. These changes in bond distances reveal strong spin-lattice coupling. The similarity in magnitude of the change in J(Mn-Mn) and J(Ho-Mn) enhances the system frustration. The structural changes are interpreted in terms of a model of competing spin order and local structural distortions. Density-functional calculations are used to estimate the energies associated with ionic displacements. The calculations also reveal asymmetric polarization of the charge density of Ho, O3, and O4 sites along the c axis in the ferroelectric phase. This polarization facilitates coupling between Ho atoms on neighboring planes normal to the c axis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

MOLECULAR AND ATOMIC GAS IN THE LARGE MAGELLANIC CLOUD. II. THREE-DIMENSIONAL CORRELATION BETWEEN CO AND H I

We compare the CO (J = 1-0) and H I emission in the Large Magellanic Cloud in three dimensions, i.e., including a velocity axis in addition to the two spatial axes, with the aim of elucidating the physical connection between giant molecular clouds (GMCs) and their surrounding H I gas. The CO J = 1-0 data set is from the second NANTEN CO survey and the H I data set is from the merged Australia Telescope Compact Array (ATCA) and Parkes Telescope surveys. The major findings of our analysis are as follows: (1) GMCs are associated with an envelope of H I emission, (2) in GMCs [average CO intensity] propor to [average H I intensity]{sup 1.1+}-{sup 0.1}, and (3) the H I intensity tends to increase with the star formation activity within GMCs, from Type I to Type III. An analysis of the H I envelopes associated with GMCs shows that their average line width is 14 km s{sup -1} and the mean density in the envelope is 10 cm{sup -3}. We argue that the H I envelopes are gravitationally bound by GMCs. These findings are consistent with a continual increase in the mass of GMCs via H I accretion at an accretion rate of 0.05 M{sub sun} yr{sup -1} over a timescale of 10 Myr. The growth of GMCs is terminated via dissipative ionization and/or stellar-wind disruption in the final stage of GMC evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

Structural Basis of the Cross-Reactivity of Genetically Related Human Anti-HIV-1 mAbs: Implications for Design of V3-Based Immunogens

Human monoclonal antibodies 447-52D and 537-10D, both coded by the VH3 gene and specific for the third variable region (V3) of the HIV-1 gp120, were found to share antigen-binding structural elements including an elongated CDR H3 forming main-chain interactions with the N terminus of the V3 crown. However, water-mediated hydrogen bonds and a unique cation- sandwich stacking allow 447-52D to be broadly reactive with V3 containing both the GPGR and GPGQ crown motifs, while the deeper binding pocket and a buried Glu in the binding site of 537-10D limit its reactivity to only V3 containing the GPGR motif. Our results suggest that the design of immunogens for anti-V3 antibodies should avoid the Arg at the V3 crown, as GPGR-containing epitopes appear to select for B cells making antibodies of narrower specificity than V3 that carry Gln at this position.

08 HYDROGEN↗

Low Temperature Structural Phase Transition of Ba3NaIr2O9

Single crystal X-ray and synchrotron X-ray powder diffraction have been used to probe the structure of Ba3NaIr2O9 from 300 K down to 20 K. Ba3NaIr2O9 is found to undergo a structural transition from hexagonal symmetry, P63/mmc, at ambient temperature to monoclinic symmetry, C2/c, at low temperature. The evolution of the unit cell volume upon cooling is indicative of a higher order structural transition, and the symmetry breaking becomes apparent as the temperature is decreased. The low temperature monoclinic structure of Ba3NaIr2O9 contains strongly distorted [NaO6] and [IrO6] octahedra in comparison to the room temperature hexagonal structure.

43 PARTICLE ACCELERATORS↗

The Effects of Various Conductive Additive and Polymeric Binder Contents on the Performance of a Lithium-ion Composite

Fundamental electrochemical methods, cell performance tests, and physical characterization tests such as electron microscopy were used to study the effects of levels of the inert materials (acetylene black (AB), a nano-conductive additive, and polyvinylidene difluoride (PVDF), a polymer binder) on the power performance of lithium-ion composite cathodes. The electronic conductivity of the AB/PVDF composites at different compositions was measured with a four-point probe direct current method. The electronic conductivity was found to increase rapidly and plateau at a AB:PVDF ratio 0.2:1 (by weight), with 0.8:1 being the highest conductivity composition. AB:PVDF compositions along the plateau of 0.2:1, 0.4:1, 0.6:1 and 0.8:1 were investigated. Electrodes of each of those compositions were fabricated with different fractions of AB/PVDF to active material. It was found that at the 0.8:1 AB:PVDF, the rate performance improved with increases in the AB/PVDF loading, whereas at the 0.2:1 AB:PVDF, the rate performance improved with decreases in the AB/PVDF loading. The impedance of electrodes made with 0.6:1 AB:PVDF was low and relatively invariant.

25 ENERGY STORAGE↗

Study on plasma assisted metal-organic chemical vapor deposition of Zr(C,N) and Ti(C,N) thin films and in situ plasma diagnostics with optical emission spectroscopy

Zr(C,N) and Ti(C,N) films were synthesized by pulsed dc plasma assisted metal-organic chemical vapor deposition method using metal-organic compounds of tetrakis diethylamido titanium and tetrakis diethylamido zirconium at 200-300 deg. C. To change the plasma characteristics, different carrier gases such as H{sub 2} and He/H{sub 2} were used and, as the reactive gas, N{sub 2} and NH{sub 3} were added to the gas mixture. The effect of N{sub 2} and NH{sub 3} gases was also evaluated in the reduction of C content of the films. Radical formation and ionization behaviors in plasma were analyzed by optical emission spectroscopy and mass spectrometry at various pulsed biases and gas conditions. The gas mixture of He and H{sub 2} as the carrier gas was very effective in enhancing the dissociation of molecular gases. In the case of N{sub 2} addition, N{sub 2} as reactive gas resulted in higher hardness. However, NH{sub 3} as reactive gas highly reduced the formation of CN radical, thereby greatly decreasing the C content of Zr(C,N) and Ti(C,N) films. The hardness of the film is 1400-1700 HK depending on gas species and bias voltage. Higher hardness can be obtained for a H{sub 2} and N{sub 2} gas atmosphere and bias voltage of -600 V. Plasma surface cleaning using N{sub 2} gas prior to deposition appeared to increase the adhesion of films on steel. The changes of plasmas including radicals and film properties are illustrated in terms of carrier and reactive gases, as well as pulsed power variation.

36 MATERIALS SCIENCE↗

Development of short-period Nb{sub 3}Sn superconducting undulators for the APS.

Superconducting undulators (SCUs) with a period of 14.5 mm are under development for the Advanced Photon Source (APS) using Nb{sub 3}Sn superconductors. The initial goal is to install a SCU with a 19- to 29-keV tuning range for the first harmonic photon energy. The design of the SCU assembly includes the interface with the beam chamber as an integral part of the assembly. A four-period Nb{sub 3}Sn half SCU was fabricated and tested. After a number of quenches, the SCU was charged to an engineering current density of 1.92 kA/mm{sup 2} in the coil pack. This corresponds to a peak field of 1.08 T on the beam axis with a pole gap of 8.5 mm. The achieved current density was approximately 90% of the engineering critical current density for the design calculations. With an operating current density of 1.6 kA/mm{sup 2}, the SCU will operate at a peak field of 0.95 T with some degree of stability.

43 PARTICLE ACCELERATORS↗

NOVEL CRYOGENIC ENGINEERING SOLUTIONS FOR THE NEW AUSTRALIAN RESEARCH REACTOR OPAL

In August 2006 the new 20MW low enriched uranium research reactor OPAL went critical. The reactor has 3 main functions, radio pharmaceutical production, silicon irradiation and as a neutron source. Commissioning on 7 neutron scattering instruments began in December 2006. Three of these instruments (Small Angle Neutron Scattering, Reflectometer and Time-of-flight Spectrometer) utilize cold neutrons.The OPAL Cold Neutron Source, located inside the reactor, is a 20L liquid deuterium moderated source operating at 20K, 330kPa with a nominal refrigeration capacity of 5 kW and a peak flux at 4.2meV (equivalent to a wavelength of 0.4nm). The Thermosiphon and Moderator Chamber are cooled by helium gas delivered at 19.8K using the Brayton cycle. The helium is compressed by two 250kW compressors (one with a variable frequency drive to lower power consumption).A 5 Tesla BSCCO (2223) horizontal field HTS magnet will be delivered in the 2{sup nd} half of 2007 for use on all the cold neutron instruments. The magnet is cooled by a pulse tube cryocooler operating at 20K. The magnet design allows for the neutron beam to pass both axially and transverse to the field. Samples will be mounted in a 4K to 800K Gifford-McMahon (GM) cryofurnace, with the ability to apply a variable electric field in-situ. The magnet is mounted onto a tilt stage. The sample can thus be studied under a wide variety of conditions.A cryogen free 7.4 Tesla Nb-Ti vertical field LTS magnet, commissioned in 2005 will be used on neutron diffraction experiments. It is cooled by a standard GM cryocooler operating at 4.2K. The sample is mounted in a 2{sup nd} GM cryocooler (4K-300K) and a variable electric field can be applied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗