Engineering topics

Kim, Yunseok

Publications and source records attributed to Kim, Yunseok.

8 records

DOE OSTI2023

High-speed mapping of surface charge dynamics using sparse scanning Kelvin probe force microscopy

Unraveling local dynamic charge processes is vital for progress in diverse fields, from microelectronics to energy storage. This relies on the ability to map charge carrier motion across multiple length- and timescales and understanding how these processes interact with the inherent material heterogeneities. Towards addressing this challenge, we introduce high-speed sparse scanning Kelvin probe force microscopy, which combines sparse scanning and image reconstruction. This approach is shown to enable sub-second imaging (>3 frames per second) of nanoscale charge dynamics, representing several orders of magnitude improvement over traditional Kelvin probe force microscopy imaging rates. Bridging this improved spatiotemporal resolution with macroscale device measurements, we successfully visualize electrochemically mediated diffusion of mobile surface ions on a LaAlO 3 /SrTiO 3 planar device. Such processes are known to impact band-alignment and charge-transfer dynamics at these heterointerfaces. Furthermore, we monitor the diffusion of oxygen vacancies at the single grain level in polycrystalline TiO 2 . Through temperature-dependent measurements, we identify a charge diffusion activation energy of 0.18 eV, in good agreement with previously reported values and confirmed by DFT calculations. Together, these findings highlight the effectiveness and versatility of our method in understanding ionic charge carrier motion in microelectronics or nanoscale material systems.

25 ENERGY STORAGE↗

DOE OSTI2023

Deep learning for exploring ultra-thin ferroelectrics with highly improved sensitivity of piezoresponse force microscopy

Hafnium oxide-based ferroelectrics have been extensively studied because of their existing ferroelectricity, even in ultra-thin film form. However, studying the weak response from ultra-thin film requires improved measurement sensitivity. In general, resonance-enhanced piezoresponse force microscopy (PFM) has been used to characterize ferroelectricity by fitting a simple harmonic oscillation model with the resonance spectrum. However, an iterative approach, such as traditional least squares (LS) fitting, is sensitive to noise and can result in the misunderstanding of weak responses. In this study, we developed the deep neural network (DNN) hybrid with deep denoising autoencoder (DDA) and principal component analysis (PCA) to extract resonance information. The DDA/PCA-DNN improves the PFM sensitivity down to 0.3 pm, allowing measurement of weak piezoresponse with low excitation voltage in 10-nm-thick Hf 0.5 Zr 0.5 O 2 thin films. Our hybrid approaches could provide more chances to explore the low piezoresponse of the ultra-thin ferroelectrics and could be applied to other microscopic techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Size Effect of Local Current-Voltage Characteristics of MX 2 Nanoflakes: Local Density of States Reconstruction from Scanning Tunneling Microscopy Experiments

Local current-voltage characteristics for low-dimensional transition-metal dichalcogenides (LDTMD), as well as the reconstruction of their local density of states (LDOS) from scanning tunneling microscopy (STM) experiments, are of fundamental interest and can be useful for advanced applications. Most of the existing models either have limited applicability for complex-shaped LDTMDs (e.g., those based on the Simmons approach) or require solving of an ill-defined integral equation to deconvolute the unknown LDOS (e.g., those based on the Tersoff approach). Using a serial expansion of the Tersoff formulas, we propose a flexible method to reconstruct the LDOS from local current-voltage characteristics measured in STM experiments. We establish a set of key physical parameters, which characterize the tunneling current of a STM-probe–sample contact and the sample LDOS expanded in Gaussian functions. Using a direct variational method coupled with probabilistic analysis, we determine these parameters from the STM experiments for MoS2 nanoflakes with different numbers of layers. The main result is the reconstruction of the LDOS in a relatively wide energy range around the Fermi level, which allows us to gain insight into the local band structure of LDTMDs. The reconstructed LDOS reveal pronounced size effects for the single-layer, two-layer, and three-layer MoS 2 nanoflakes, which we relate to the low dimensionality and strong bending or corrugation of the nanoflakes. We hope that the proposed elaboration of the Tersoff approach, allowing LDOS reconstruction, will be of critical interest for the quantitative description of STM experiments and also of use to better understand the microscopic physical aspects of the surface, strain, and bending contributions to the LDTMDs’ electronic properties.

42 ENGINEERING↗

DOE OSTI2022

Highly enhanced ferroelectricity in HfO 2 -based ferroelectric thin film by light ion bombardment

Continuous advancement in nonvolatile and morphotropic beyond-Moore electronic devices requires integration of ferroelectric and semiconductor materials. The emergence of hafnium oxide (HfO 2 )–based ferroelectrics that are compatible with atomic-layer deposition has opened interesting and promising avenues of research. However, the origins of ferroelectricity and pathways to controlling it in HfO 2 are still mysterious. We demonstrate that local helium (He) implantation can activate ferroelectricity in these materials. Additionally, the possible competing mechanisms, including He ion–induced molar volume changes, vacancy redistribution, vacancy generation, and activation of vacancy mobility, are analyzed. These findings both reveal the origins of ferroelectricity in this system and open pathways for nanoengineered binary ferroelectrics.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Correlation Between Corrugation-Induced Flexoelectric Polarization and Conductivity of Low-Dimensional Transition Metal Dichalcogenides

The tunability of polar and semiconducting properties of low-dimensional transition metal dichalcogenides (TMDs) have propelled them to the forefront of fundamental and applied physical research. These materials can vary their electrophysical properties from nonpolar to ferroelectric, and from direct-band semiconducting to metallic. In addition to classical controlling factors, such as field effect, composition, and doping, new degrees of freedom emerge in TMDs due to the curvature-induced electron redistribution and the associated changes in electronic properties. Here we theoretically explore the elastic and electric fields, flexoelectric polarization and free charge density for a TMD nanoflake placed on a rough substrate with a sinusoidal corrugation profile. Finite element modelling results for different flake thickness and corrugation depth yield insights into the flexoelectric nature of the out-of-plane electric polarization and establish the unambiguous correlation between the polarization and static conductivity modulation. The modulation is caused by the coupling between the deformation potential and inhomogeneous elastic strains, which evolve in the TMD nanoflake due to the adhesion between the flake surface and corrugated substrate. We reveal a pronounced maximum in the thickness dependences of the electron and hole conductivity of MoS 2 and MoTe 2 nanoflakes placed on a corrugated substrate, which opens the way for the optimization of their geometry towards significant improvement in their polar and electronic properties, necessary for advanced applications in nanoelectronics and memory devices. Specifically, the obtained results can be useful for the development of nanoscale straintronic devices based on the bended MoS 2 , MoTe 2 , and MoSTe nanoflakes, such as diodes and bipolar transistors with a bending-controllable sharpness of p-n junctions.

42 ENGINEERING↗

DOE OSTI2020

Selective patterning of out-of-plane piezoelectricity in MoTe 2 via focused ion beam

Two-dimensional transition-metal dichalcogenides (TMDs) have a strain-sensitive nature and can only exhibit in-plane piezoelectricity, owing to their in-plane inversion symmetry breaking, which limits their practical applications for vertical stimulations. Here, we demonstrated the capability of focused ion beams to create out-of-plane piezoelectricity on multi-layered MoTe 2 . We utilized a focused helium ion beam to selectively pattern the out-of-plane piezoelectricity via defect engineering in a layered MoTe 2 flake. The generated out-of-plane piezoelectricity in the desired area was quantitatively examined using atomic force microscopy, and ion beam irradiation-induced defect formation that gave rise to inversion symmetry breaking was confirmed. These results indicated that the out-of-plane piezoelectricity can be selectively patterned through a focused helium ion beam, and it is expected that this approach can also be applied to other classes of TMDs and can expand the application fields of TMD-based devices.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Flexoinduced ferroelectricity in low-dimensional transition metal dichalcogenides

We developed a Landau-type theory for the description of polar phenomena in low-dimensional transition metal dichalcogenides (TMDs), specifically exploring the flexoelectric origin of the polarization induced by a spontaneous bending and by inversion symmetry breaking due to the interactions with substrate. We consider the appearance of the spontaneous out-of-plane polarization due to the flexoelectric coupling with the strain gradient of the spontaneous surface rippling and surface-induced piezoelectricity. Additionally, performed calculations proved that the out-of-plane spontaneous polarization, originating from the flexoelectric effect in a rippled TMD, is bistable and reversible by a nonuniform electric field. In contrast, the spontaneous polarization induced by a misfit strain and symmetry-sensitive surface-induced piezoelectric coupling, cannot be reversed by an external electric field. Special attention is paid to the spectral analysis of the linear dielectric susceptibility and gain factor, which enhancement is critically important for the observation of the polar phenomena in low-dimensional TMDs by the surface-enhanced vibrational spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Phase diagrams of single-layer two-dimensional transition metal dichalcogenides: Landau theory

We report single layer (SL) two-dimensional transition metal dichalcogenides (TMDs), such as MoS 2 , ReS 2 , WSe 2 , and MoTe 2 have now become the focus of intensive fundamental and applied research due to their intriguing and tunable physical properties. These materials exhibit a broad range of structural phases that can be induced via elastic strain, chemical doping, and electrostatic field effect. These transformations, in turn, can open and close the band gap of SL-TMDs, leading to metal-insulator transitions, and lead to emergence of more complex quantum phenomena. These considerations necessitate detailed understanding of the mesoscopic mechanisms of these structural phase transitions. Here we develop a Landau-type thermodynamic description of SL-TMDs on a sample of the SL-(MoS 2 ) 1-x -(ReS 2 ) x system and analyze the free energy surfaces, phase diagrams, and order parameter behavior. Our results predict the existence of multiple structural phases with two-, six- and 12-fold degenerated energy minima for in-plane and out-of-plane order parameters. This analysis suggests that out-of-plane ferroelectricity can exist in many of these phases, with the switchable polarization being proportional to the out-of-plane order parameter. We further predict that the domain walls in SL-(MoS 2 ) 1-x -(ReS 2 ) x should become conductive above a certain strain threshold.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗