Search NASA⌕ Search

Engineering topics

Kimmel, Gregory A.

Publications and source records attributed to Kimmel, Gregory A..

Structural relaxation of water during rapid cooling from ambient temperatures

Experiments investigating the properties of deeply supercooled liquid water are needed to develop a comprehensive understanding of water’s anomalous properties. One approach involves transiently heating nanoscale water films into the supercooled region for several nanoseconds at a time and then interrogating the water films after they have quenched to cryogenic temperatures. To relate the results obtained with this approach to other experiments and simulations on supercooled water, it is important to understand how closely the quenched structure tracks the (metastable) equilibrium structure of water as a function of the transient heating temperature. A key step involves quantifying the extent to which water that is transiently heated to ambient temperatures [hyperquenched water (HQW)] subsequently relaxes toward the structure of low-density amorphous (LDA) ice as it cools. We analyzed the infrared reflection–absorption spectra of LDA, HQW, and crystalline ice films to determine their complex indices of refraction. With this information, we estimate that HQW retains ~50%–60% of a structural motif characteristic of water at high temperatures with the balance comprised of a low-temperature motif. This result, along with results from x-ray diffraction experiments on water and amorphous ices, allows one to quantify the fraction of the high-temperature motif at approximately zero pressure as a function of temperature from 150 to 350 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Heterogeneity and Kovacs’ Memory Effects in Supercooled Water

Understanding the properties of supercooled water is important for developing a comprehensive theory for liquid water and amorphous ices. Because of rapid crystallization for deeply supercooled water, experiments on it are typically carried out under conditions in which the temperature and/or pressure are rapidly changing. As a result, information on the structural relaxation kinetics of supercooled water as it approaches (metastable) equilibrium is useful for interpreting results obtained in this experimentally challenging region of phase space. Here, we used infrared spectroscopy and the fast time resolution obtained by transiently heating nanoscale water films to investigate relaxation kinetics (aging) in supercooled water. When the structural relaxation of the water films was followed using a temperature jump protocol analogous to the classic experiments of Kovacs, similar memory effects were observed. In particular, after suitable aging at one temperature, water’s structure displayed an extremum versus the number of heat pulses upon changing to a second temperature before eventually relaxing to a steady-state structure characteristic of that temperature. A random double well model based on the idea of dynamic heterogeneity in supercooled water accounts for the observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixed Molecular and Dissociative Water Adsorption on Hydroxylated TiO 2 (110): An Infrared Spectroscopy and Ab Initio Molecular Dynamics Study

For this work, we have investigated the structure and dynamics of water (D 2 O) adsorbed on TiO 2 (110) for coverages between 0 and 1 monolayer with infrared reflection absorption spectroscopy (IRAS) and ab initio molecular dynamics (AIMD) simulations. For D 2 O coverages as low as 0.4 monolayers (ML) on a hydroxylated surface, IR spectra typical of hydrogen-bonded chains of water molecules are observed. However, for D 2 O coverages ≥ 0.3 ML, a sharp, high frequency peak is also observed in the p-polarized spectra that is red-shifted relative to the bridging hydroxyl peak. This new peak is not observed for water adsorbed on an oxidized surface. Based on the AIMD simulations and comparisons with previous IR spectra for TiO 2 nanoparticles, the new peak is assigned to terminal hydroxyl groups produced by dissociative adsorption of some of the water on TiO 2 (110). The simulations indicate that water dissociation is related to the presence of defect electrons in the system, but not due to direct interactions between adsorbed water and bridging hydroxyls.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrated atomic force microscopy and x-ray irradiation for in situ characterization of radiation-induced processes

Understanding radiation-induced chemical and physical transformations at material interfaces is important across diverse fields, but experimental approaches are often limited to either ex situ observations or in situ electron microscopy or synchrotron-based methods in which cases the radiation type and dose are inextricably tied to the imaging basis itself. In this work we overcome this limitation by demonstrating integration of an X-ray source with an atomic force microscope to directly monitor radiolytically-driven interfacial chemistry at the nanoscale. We illustrate the value of in situ observations by examining effects of radiolysis on material adhesion forces in aqueous solution, as well as examining the production of alkali nitrates at the interface between an alkali halide crystal surface and air. For the examined salt-air interface, direct visualization under flexible experimental conditions greatly extends prior observations by enabling the transformation process to be followed comprehensively from source-to-sink with mass balance quantitation. Overall, our novel rad-AFM opens doors into understanding the dynamics of radiolytically-driven mass transfer and surface alteration at the nanoscale in real-time.

47 OTHER INSTRUMENTATION↗

Crystallization kinetics of amorphous acetonitrile nanoscale films

We measure the isothermal crystallization kinetics of amorphous acetonitrile films using molecular beam dosing and reflection adsorption infrared spectroscopy RAIRS techniques. Experiments on a graphene covered Pt(111) substrate revealed that the crystallization rate slows dramatically at long times and that the overall kinetics cannot be described by a simple application of the Avrami equation. The crystallization kinetics also have a thickness dependence with the thinner films crystallizing much slower than thicker ones. Additional experiments showed that decane layers at both the substrate and vacuum interfaces can also affect the crystallization rates. A comparison of the crystallization rates for CH 3 CN and CD 3 CN films showed only an isotope effect of ~1.09. When amorphous films were deposited on a crystalline film, the crystalline layer did not act as a template for the formation of a crystalline growth front. Finally, these overall results suggest that the crystallization kinetics complicated indicating the possibility of multiple nucleation mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct visualization of radiation-induced transformations at alkali halide–air interfaces

Radiation driven reactions at mineral/air interfaces are important to the chemistry of the atmosphere, but experimental constraints (e.g. simultaneous irradiation, in situ observation, and environmental control) leave process understanding incomplete. Using a custom atomic force microscope equipped with an integrated X-ray source, transformation of potassium bromide surfaces to potassium nitrate by air radiolysis species was followed directly in situ at the nanoscale. Radiolysis initiates dynamic step edge dissolution, surface composition evolution, and ultimately nucleation and heteroepitaxial growth of potassium nitrate crystallites mediated by surface diffusion at rates controlled by adsorbed water. Finally, in contrast to in situ electron microscopy and synchrotron-based imaging techniques where high radiation doses are intrinsic, our approach illustrates the value of decoupling irradiation and the basis of observation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural relaxation and crystallization in supercooled water from 170 to 260 K

The structural relaxation and crystallization of deeply supercooled water are investigated in transiently-heated nanoscale water films using infrared spectroscopy for temperatures between 170 and 260 K. For temperatures above ~230 K, the relaxation kinetics can be fit with a simple exponential decay which is characteristic of normal liquids. At lower temperatures, increasingly non-exponential decay is observed indicating the onset of heterogeneous dynamics. Water’s relaxation rate depends on its initial structure with hyper-quenched glassy water (HQW) typically relaxing more quickly than low-density amorphous solid water (LDA). At all temperatures, the relaxation time, trel is faster than the crystallization time, txtal. For HQW, the ratio, txtal/trel, goes through a minimum at ~198 K where it is about 60. The research was designed and supervised by GAK and BDK. LK and WAT conducted the experiments and analyzed the data. LK and GAK wrote the manuscript, with input from all authors.

Kringle, Loni M.↗

Observation of molecular hydrogen produced from bridging hydroxyls on anatase TiO2(101)

Anatase TiO2 is used extensively in a wide range of catalytic and photocatalytic processes and is a promising catalyst for hydrogen production. Here, we show that molecular hydrogen was produced from bridging hydroxyls, HOb, on the (101) surface of single crystal anatase (a-TiO2(101)). Electron bombardment at 30 K produced bridging oxygen vacancies in the surface. Deuterated bridging hydroxyls, DOb, were subsequently formed via dissociation of adsorbed D2O and confirmed by infrared reflection-absorption spectroscopy. During temperature programmed desorption (TPD) spectroscopy, D2 desorption was observed at 520 K. Density functional theory calculations show that both H2 and H2O production from HOb are endothermic at 0 K on a-TiO2(101), but H2 (H2O) desorption is entropically driven above 230 K (800 K). The calculated activation barrier for H2 desorption is 1.40 eV, which is similar to the desorption energy obtained from analysis of the D2 TPD spectra. The H2 desorption likely proceeds in two steps: H atom diffusion on the surface and then recombination. The calculations indicate that diffusion of the hydrogen atoms into the subsurface could also be an important process. We thank Drs. Z. Dohnalek and R. Rousseau for stimulating discussions. This work was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, & Biosciences and performed in EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for DOE by Battelle. We also acknowledge the WPI computational facilities for providing resources to perform the DFT studies.

Deskins, N A.↗

Reversible structural transformations in supercooled liquid water from 135 to 245 K

Water has many anomalous properties compared to “simple” liquids, and these anomalies are typically enhanced in supercooled water.1-3 While numerous models have been proposed, including the liquid-liquid critical point,4,5 the singularity-free scenario,6 and the stability limit conjecture,1 a molecular-level understanding remains elusive. The main difficulty in determining which, if any, of these models is correct is the limited amount of data in the relevant temperature and pressure ranges. For water at ambient pressures, which is the focus of this work, data is largely missing from 160 – 232 K (“No Man’s Land”) due to rapid crystallization.2,3 Whether rapid crystallization is just an experimental obstacle, or a fundamental problem signaling the inability of water to thermally equilibrate prior to crystallization is also a major unanswered question.5,7 Here, we investigate the structural transformations of transiently-heated, supercooled water with nanosecond time resolution using infrared vibrational spectroscopy. The experiments demonstrate three key results. First, water’s structure relaxes from its initial configuration to a “steady-state” configuration prior to the onset of crystallization over a wide temperature range. Second, water’s steady-state structure can be reproduced by a linear combination of two, temperature-independent structures that correspond to a “high-temperature liquid” and a “low-temperature liquid.” Third, the observed structural changes are reversible over the full temperature range. Taken together, these results show that supercooled water can equilibrate prior to crystallization for temperatures from the homogeneous nucleation temperature, TH ~232 K,3 down to the glass transition temperature (Tg ~ 136 K). Second, the results provide support for the hypothesis that supercooled water can be described as a mixture of two, structurally-distinct, interconvertible liquids from 135 K to 245 K.5,8-18

Kringle, Loni M.↗

Binding of Formic Acid on Anatase TiO2(101)

The adsorption of formic acid (FA) and the formation of formate species on metal oxide surfaces are of great interest in catalysis. Formic acid is used to probe the adsorption properties of surface sites and formates are common intermediates in many catalytic reactions. Here we focus on the interaction of FA with a prototypical anatase TiO2(101) surface by using a combination of scanning tunneling microscopy (STM), infrared reflection absorption spectroscopy (IRAS), electron stimulated desorption (ESD), and density functional theory (DFT) to assess the coverage dependent evolution of different FA-derived surface species at low temperatures (80–240 K). We find that isolated FA adsorbs at 80 K in both monodentate (MD) and bidentate (BD) configurations on top of undercoordinated Ti sites (Ti5c). The MD form is likely deprotonated and readily converts upon annealing to bridging BD on two neighboring Ti5c sites. DFT calculations show that molecularly-bound MD FA is metastable and readily converts into a deprotonated state in the proximity of subsurface oxygen vacancy. The stability of the MD species increases as the availability of the paired Ti5c sites for BD formation diminishes at high coverages. Upon surface saturation, a mixed configuration of alternating bidentate and monodentate species with coverage of 2/3 FA/Ti5c represents the most favorable configuration. This is in contrast with the adsorption of FA on rutile TiO2(110) and many other oxides, where bidentate formate species dominate. Y.W., A.D., G.A.K., R.R., N.G.P., and Z.D. were supported by the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences and Biosciences (CSGB) under FWP 47319. B.W. and A.S. acknowledge the support of DOE BES, CSGB Division under Award DESC0007347. The experimental studies were performed in EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for DOE by Battelle. The authors also acknowledge computational resources from the TIGRESS high-performance computer center at Princeton University.

Wang, Yang↗