Search NASA⌕ Search

Engineering topics

King, H. J.

Publications and source records attributed to King, H. J..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Low voltage 30-cm ion thruster development

The basic goal was to advance the development status of the 30-cm electron bombardment ion thruster from a laboratory model to a flight-type engineering model (EM) thruster. This advancement included the more conventional aspects of mechanical design and testing for launch loads, weight reduction, fabrication process development, reliability and quality assurance, and interface definition, as well as a relatively significant improvement in thruster total efficiency. The achievement of this goal was demonstrated by the successful completion of a series of performance and structural integrity (vibration) tests. In the course of the program, essentially every part and feature of the original 30-cm Thruster was critically evaluated. These evaluations, led to new or improved designs for the ion optical system, discharge chamber, cathode isolator vaporizer assembly, main isolator vaporizer assembly, neutralizer assembly, packaging for thermal control, electrical terminations and structure.

King, H. J.↗
NASA NTRS1974

Status of 30 cm mercury ion thruster development

Two engineering model 30-cm ion thrusters have been assembled, calibrated, and qualification tested. This paper discusses the thruster design, performance, and power system. Test results include documentation of thrust losses due to doubly charged mercury ions and beam divergence by both direct thrust measurements and beam probes. Diagnostic vibration tests have led to improved designs of the thruster backplate structure, feed system, and harness. Thruster durability is being demonstrated over a thrust range of 97 to 113 mN at a specific impulse of about 2900 seconds. As of August 15, 1974, the thruster has successfully operated for over 4000 hours.

Sovey, J. S.↗
NASA NTRS1974

Status of 30 cm mercury ion thruster development

Two engineering model 30-cm ion thrusters were assembled, calibrated, and qualification tested. This paper discusses the thruster design, performance, and power system. Test results include documentation of thrust losses due to doubly charged mercury ions and beam divergence by both direct thrust measurements and beam probes. Diagnostic vibration tests have led to improved designs of the thruster backplate structure, feed system, and harness. Thruster durability is being demonstrated over a thrust range of 97 to 113 mN at a specific impulse of about 2900 seconds. As of August 15, 1974, the thruster has successfully operated for over 4000 hours.

Sovey, J. S.↗
NASA NTRS1973

An engineering model 30 cm ion thruster

Thruster development at Hughes Research Laboratories and NASA Lewis Research Center has brought the 30-cm mercury bombardment ion thruster to the state of an engineering model. This thruster has been designed to have sufficient internal strength for direct mounting on gimbals, to weigh 7.3 kg, to operate with a corrected overall efficiency of 71%, and to have 10,000 hours lifetime. Subassemblies, such as the ion optical system, isolators, etc., have been upgraded to meet launch qualification standards. This paper presents a summary of the design specifications and performance characteristics which define the interface between the thruster module and the remainder of the propulsion system.

Poeschel, R. L.↗
NASA NTRS1973

Thrust vectoring of broad ion beams for spacecraft attitude control

Thrust vectoring is shown to increase the attractiveness of ion thrusters for satellite control applications. Incorporating beam deflection into ion thrusters makes it possible to achieve attitude control without adding any thrusters. Two beam vectoring systems are described that can provide up to 10-deg beam deflection in any azimuth. Both systems have been subjected to extended life tests on a 5-cm thruster which resulted in projected life times of from 7500 to 20,000 hours.

Collett, C. R.↗
NASA NTRS1972

Thrust vectoring systems

The design, fabrication, and testing of thrust vectorable ion optical systems capable of controlling the thrust direction from both 5- and 30-cm diameter ion thrusters is described. Both systems are capable of greater than 10 deg thrust deflection in any azimuthal direction. The 5-cm system is electrostatic and hence has a short response time and minimal power consumption. It has recently been tested for more than 7500 hours on an operational thruster. The 30-cm system is mechanical, has a response time of the order of 1 min, and consumes less than 0.3% of the total system input power at full deflection angle.

King, H. J.↗
NASA NTRS1972

An ion thruster module for primary propulsion systems.

The development of a 30 cm thruster module having the operational characteristics, weight, and structural integrity consistent with flight hardware is described. Elements of the program discussed in this paper are selection of an ion optical system design, development of the discharge chamber and its control, and the results of extensive performance mapping tests. The thruster system operates at 2750 sec specific impulse at 69% over-all efficiency and can be throttled from 2.0 A to 0.16 A beam current with a control system requiring a single electrical input. The 1 kV ion beam is formed by a high perveance, two grid ion optical system.

King, H. J.↗
NASA NTRS1972

Mass separator for low velocity ions

Separator provides broad beam of protons free of other charged species to simulate the solar wind in experiments designed to determine effect on materials.

King, H. J.↗
NASA NTRS1970

Gas regulator Patent

Control of gas flow from pressurized vessel by thermal expansion of metal plug

Kami, S.↗
NASA NTRS1970

Thrust vectoring systems

Ion thrust vectoring systems for satellite attitude control and stationkeeping, discussing deflection techniques

King, H. J.↗