Search NASA⌕ Search

Engineering topics

Kinnibrugh, Tiffany L.

Publications and source records attributed to Kinnibrugh, Tiffany L..

8 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Entropy-Stabilized Multication Fluorides as a Conversion-Type Cathode for Li-Ion Batteries–Impact of Element Selection

Metal fluorides (e.g., FeF 2 and FeF 3 ) have received attention as conversion-type cathode materials for Li-ion batteries due to their higher theoretical capacity compared to that of common intercalation materials. However, their practical use has been hindered by low round-trip efficiency, voltage hysteresis, and capacity fading. Cation substitution has been proposed to address these challenges, and recent advancements in battery performance involve the introduction of entropy stabilization in an attempt to facilitate reversible conversion reactions by increasing configurational entropy. Building on this concept, high entropy fluorides with five cations were synthesized by using a simple mechanochemical route. In order to examine the impact of element selection, Co 0.2 Cu 0.2 Ni 0.2 Zn 0.2 Fe 0.2 F 2 (HEF-Fe) was compared with Co 0.2 Cu 0.2 Ni 0.2 Zn 0.2 Mg 0.2 F 2 (HEF-Mg), replacing electrochemically inactive Mg with Fe as an active participant in the conversion reaction. Combining electrochemical measurements with first-principles calculations, high-resolution electron microscopy, and synchrotron X-ray analysis, HEFs’ battery performances and conversion reaction mechanisms were investigated in detail. The results highlighted that replacement of Mg with Fe was beneficial, with enhanced capacity, rate capability, and surface stability. In addition, it was found that HEF-Fe showed similar cycle stability without an electrochemically inactive element. In conclusion, these findings provide valuable insights for the design of high entropy multielement fluorides for improved Li-ion battery performance.

25 ENERGY STORAGE↗
DOE OSTI2024

In situ characterization of metastable Pb3O5 and Pb2O3 phases during thermal decomposition of PbO2 to PbO

Nonstoichiometric lead oxides play a key role in the formation and cycling of the positive electrodes in a lead acid battery. These phases have been linked to the underutilization of the positive active material but also play a key role in the battery’s cycle life, providing inter-particle adhesion and the connection to the underlying lead grid. Similar phases have previously been identified by mass loss or color change during thermal annealing of PbO2 to PbO, suggesting that at least two intermediate PbOx phases exist. Using multiple in situ analysis techniques (powder diffraction, x-ray absorption, x-ray photoelectron spectroscopy) and ex situ nuclear magnetic resonance measurements, the structural conversion and changes in the lead oxidation states were identified during this process. Isolation of the PbOx phases enabled confirmation of Pb3O5 and Pb2O3 by diffraction and the first 207Pb NMR measurement of these intermediates.

Kinnibrugh, Tiffany L.↗
DOE OSTI2024

Soft-Chemical Synthesis, Structure Evolution, and Insulator-to-Metal Transition in Pyrochlore-like λ-RhO 2

λ-RhO 2 , a prototype 4d transition metal oxide, has been prepared by the oxidative delithiation of spinel LiRh 2 O 4 using ceric ammonium nitrate. Average-structure studies of this RhO 2 polytype, including synchrotron powder X-ray diffraction and electron diffraction, indicate the room-temperature structure to be tetragonal, in space group I4 1 /amd, with a first-order structural transition to cubic $Fd\bar{3}m$ at T = 345 K on warming. Synchrotron X-ray pair distribution function analysis and 7 Li solid-state nuclear magnetic resonance measurements suggest that the room-temperature structure displays local Rh-Rh bonding. The formation of these local dimers appears to be associated with a metal-to-insulator transition with a nonmagnetic ground state, as also supported by density functional theory-based electronic structure calculations. In conclusion, this contribution demonstrates the power of soft chemistry to kinetically stabilize a simple binary oxide compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chemical Insights into the Formation of Colloidal Iridium Nanoparticles from In Situ X-ray Total Scattering: Influence of Precursors and Cations on the Reaction Pathway

Iridium nanoparticles are important catalysts for several chemical and energy conversion reactions. Studies of iridium nanoparticles have also been a key for the development of kinetic models of nanomaterial formation. However, compared to other metals such as gold or platinum, knowledge on the nature of prenucleation species and structural insights into the resultant nanoparticles are missing, especially for nanoparticles obtained from Ir$_x$Cl$_y$ precursors investigated here. We use in situ X-ray total scattering (TS) experiments with pair distribution function (PDF) analysis to study a simple, surfactant-free synthesis of colloidal iridium nanoparticles. The reaction is performed in methanol at 50 °C with only a base and an iridium salt as precursor. From different precursor salts–IrCl 3 , IrCl 4 , H 2 IrCl 6 , or Na 2 IrCl 6 –colloidal nanoparticles as small as Ir ~55 are obtained as the final product. The nanoparticles do not show the bulk iridium face-centered cubic ($fcc$) structure but show decahedral and icosahedral structures. The formation route is highly dependent on the precursor salt used. Using IrCl 3 or IrCl 4 , metallic iridium nanoparticles form rapidly from Ir$_x$Cl$_y$$^{n–}$ complexes, whereas using H 2 IrCl 6 or Na 2 IrCl 6 , the iridium nanoparticle formation follows a sudden growth after an induction period and the brief appearance of a crystalline phase. With H 2 IrCl 6 , the formation of different Ir$_n$ ($n$ = 55, 55, 85, and 116) nanoparticles depends on the nature of the cation in the base (LiOH, NaOH, KOH, or CsOH, respectively) and larger particles are obtained with larger cations. As the particles grow, the nanoparticle structure changes from partly icosahedral to decahedral. In conclusion, the results show that the synthesis of iridium nanoparticles from Ir$_x$Cl$_y$ is a valuable iridium nanoparticle model system, which can provide new compositional and structural insights into iridium nanoparticle formation and growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The Importance of Surface Oxygen for Lithiation and Morphology Evolution during Calcination of High-Nickel NMC Cathodes

Nanoscale morphology has a direct impact on the performance of materials for electrochemical energy storage. Despite this importance, little is known about the evolution of primary particle morphology nor its effect on chemical pathways during synthesis. In this work, operando characterization is combined with atomic-scale and continuum simulations to clarify the relationship between morphology of cathode primary particles and their lithiation during calcination of LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC-811). This combined approach reveals a key role for surface oxygen adsorption in facilitating the lithiation reaction by promoting metal diffusion and oxidation, and simultaneously providing surface sites for lithium insertion. Furthermore, oxygen surface termination is shown to increase the activation energy for sintering, leading to smaller primary particle sizes at intermediate temperatures. Smaller particles provide both shorter diffusion lengths for lithium incorporation and increased surface site density for lithium insertion. These insights provide a foundation for more tailored syntheses of cathode materials with optimized performance characteristics.

25 ENERGY STORAGE↗
DOE OSTI2022

Surfactant-free syntheses and pair distribution function analysis of osmium nanoparticles

A surfactant-free synthesis of precious metal nanoparticles (NPs) performed in alkaline low-boiling-point solvents has been recently reported. Monoalcohols are here investigated as solvents and reducing agents to obtain colloidal Os nanoparticles by using low-temperature (<100 °C) surfactant-free syntheses. The effect of the precursor (OsCl 3 or H 2 OsCl 6 ), precursor concentration (up to 100 mM), solvent (methanol or ethanol), presence or absence of a base (NaOH), and addition of water (0 to 100 vol %) on the resulting nanomaterials is discussed. It is found that no base is required to obtain Os nanoparticles as opposed to the case of Pt or Ir NPs. The robustness of the synthesis for a precursor concentration up to 100 mM allows for the performance of X-ray total scattering with pair distribution function (PDF) analysis, which shows that 1–2 nm hexagonal close packed (hcp) NPs are formed from chain-like [OsO x Cl y ] complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Simple Setup Miniaturization with Multiple Benefits for Green Chemistry in Nanoparticle Synthesis

The development of nanomaterials often relies on wet-chemical synthesis performed in reflux setups using round-bottom flasks. Here, an alternative approach to synthesize nanomaterials is presented that uses glass tubes designed for NMR analysis as reactors. This approach uses less solvent and energy, generates less waste, provides safer conditions, is less prone to contamination, and is compatible with high-throughput screening. The benefits of this approach are illustrated by an in breadth study with the synthesis of gold, iridium, osmium, and copper sulfide nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗