Engineering topics

Kipshidze, Gela

Publications and source records attributed to Kipshidze, Gela.

10 records

DOE OSTI2024

Photonic Crystal Surface Emitting GaSb-Based Type-I Quantum Well Diode Lasers

The GaSb-based epitaxially regrown monolithic diode PCSELs operating near 2 μm at room temperature in continuous wave regime and generating 30 mW of output power from 200 μm diameter aperture have been designed and fabricated. Here, the devices demonstrated CW threshold current density of about 500 A/cm 2 . The laser output power was enhanced thanks to increased buried void area fill-factor in the photonic crystal layer with multiple voids per unit cell. The PCSEL generated ultra-low divergence donut shape beams at the currents near threshold. At higher injection currents, the device brightness was limited by excitation of the higher order lateral modes. Generation of the vector-vortex beams of different types by different band edge states of the buried photonic crystal was observed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2023

g-factor engineering with InAsSb alloys toward zero band gap limit

Band gap is known as an effective parameter for tuning the Landé g factor in semiconductors and can be manipulated in a wide range through the bowing effect in ternary alloys. In this work, using the recently developed virtual substrate technique, high-quality InAsSb alloys throughout the whole Sb composition range are fabricated and a large g factor of g≈-90 at the minimum band gap of ~0.1 eV, which is almost twice that in bulk InSb, is found. Further analysis to the zero gap limit reveals a possible gigantic g factor of g≈-200 with a peculiar relativistic Zeeman effect that disperses as the square root of magnetic field. Such a g-factor enhancement toward the narrow gap limit cannot be quantitatively described by the conventional Roth formula, as the orbital interaction effect between the nearly triply degenerated bands becomes the dominant source for the Zeeman splitting. These results may provide insights into realizing large g factors and spin-polarized states in semiconductors and topological materials.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Continuous wave room temperature operation of the 2 $μ$m GaSb-based photonic crystal surface emitting diode lasers

Continuous wave room temperature operation of 2 μm GaSb-based photonic-crystal surface-emitting diode lasers has been realized. The deep etched square mesa devices showed threshold current densities of 500 A/cm 2 at 20 °C. The epi-side down mounted lasers generated above 10 mW of output power in the continuous wave regime and tens of milliwatts in pulses from the 200 × 200 μm 2 aperture. Here, the breakthrough in the device performance parameters was achieved thanks to a highly homogeneous air-pocket retaining epitaxial regrowth process optimized for a specifically designed antimonide diode laser heterostructure. The nanofabrication method utilizing low temperature atomic hydrogen surface cleaning yielded low disorder square lattice of droplet-shaped voids covered by uniform p-cladding layer. The laser emission spectrum as well as near/far field patterns demonstrated peculiar features presumably linked to deformation of the void shape during regrowth and formation of the array of filaments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

Photonic Crystal Surface Emitting Diode Lasers with λ near 2 µm

Epitaxially regrown electrically pumped photonic crystal surface emitting lasers (PCSELs) operating near 2 µm were designed and fabricated within a III-V-Sb material system. A high-index-contrast photonic crystal layer was incorporated into the laser heterostructures by air-pocket-retaining epitaxial regrowth. Transmission electron microscopy studies confirmed uniform and continuous AlGaAsSb initial growth over the nano-patterned GaSb surface, followed by the development of the air-pockets. The PCSEL threshold current density had a minimal value of ~170 A/cm 2 in the 160–180 K temperature range when the QW gain spectrum aligned with the Γ 2 band edge of the photonic crystal. The devices operated in a continuous wave regime at 160 K. The divergence and polarization of the multimode laser beam emitted from the 200 µm × 200 µm PCSEL aperture were controlled by filamentation.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Giant g-factors and fully spin-polarized states in metamorphic short-period InAsSb/InSb superlattices

Abstract Realizing a large Landé g -factor of electrons in solid-state materials has long been thought of as a rewarding task as it can trigger abundant immediate applications in spintronics and quantum computing. Here, by using metamorphic InAsSb/InSb superlattices (SLs), we demonstrate an unprecedented high value of g ≈ 104, twice larger than that in bulk InSb, and fully spin-polarized states at low magnetic fields. In addition, we show that the g -factor can be tuned on demand from 20 to 110 via varying the SL period. The key ingredients of such a wide tunability are the wavefunction mixing and overlap between the electron and hole states, which have drawn little attention in prior studies. Our work not only establishes metamorphic InAsSb/InSb as a promising and competitive material platform for future quantum devices but also provides a new route toward g -factor engineering in semiconductor structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

Electrically Pumped Epitaxially Regrown GaSb-Based Type-I Quantum-Well Surface-Emitting Lasers with Buried High-Index-Contrast Photonic Crystal Layer

Epitaxially regrown electrically pumped photonic crystal surface-emitting lasers (PCSELs) emitting near 2 and 2.6 μm are designed, fabricated, and characterized. A high-index-contrast photonic crystal layer is incorporated into the GaSb-based laser heterostructure by air-hole-retaining epitaxial regrowth. A square lattice of triangular holes is etched in the top waveguide core layer of the incomplete laser heterostructure. The nanopatterned surface is subsequently cleaned and regrown with AlGaAsSb p-cladding material. Transmission electron microscopy studies demonstrate uniform regrowth over the nanopatterned GaSb surface. The selected regrowth regimes yield a buried 2D array of elongated air-holes. The diode PCSELs based on moderately etched nanopatterns demonstrate band-edge lasing near 2 μm up to room temperatures. The cascade diode PCSELs operate near 2.6 μm with minimum threshold current densities of about 500 A cm -2 achieved at 180 K. The devices generate mW level output in narrow divergence beam emitted from the window in substrate contact. The angle-resolved electroluminescence measurements reveal a four-sub-band band structure with an apparent photonic bandgap corresponding to the buried high-index-contrast square photonic crystal layer. Finally, the PCSELs made of heterostructures supporting two modes in the vertical direction demonstrate two sets of sub-bands showing anti-crossing-like interaction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2021

High-power narrow spectrum GaSb-based DBR lasers emitting near 2.1 µm

Stable high-power narrow-linewidth operation of the 2.05–2.1 µm GaSb-based diode lasers was achieved by utilizing the sixth-order surface-etched distributed Bragg reflector (DBR) mirrors. The DBR multimode devices with 100 µm wide ridge waveguides generated ~850 mW in the continuous wave (CW) regime at 20°C. The device CW output power was limited by thermal rollover. The laser emission spectrum was defined by Bragg reflector reflectivity at all operating currents in a wide temperature range. Finally, the devices operated at DBR line with detuning from gain peak exceeding 10 meV.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2020

Dual-Wavelength Y-Branch DBR Lasers With 100 mW of CW Power Near 2 μm

In this study, the interband GaSb-based diode lasers emitting simultaneously in two narrow bands separated by either ~1.6 or ~3.3 THz were designed, fabricated and characterized. The device active region contained one asymmetric tunnel-coupled double quantum well with separation between two lowest electron subbands controlled by thickness of the tunnel barrier. The Y-branch 6th order distributed Bragg reflector devices have been fabricated with either deep or shallow etched ridge waveguides. The increase of the deeply etched ridge waveguide width from 10 to 20 μm improved laser threshold and efficiency thanks to reduction of the relative role of the sidewall defect recombination. Further improvement of the device performance parameter was achieved by shallow etching. The shallow etched lasers with stable dual-wavelength emission spectrum generated 100 mW of continuous wave output power at 20 °C

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2020

Dirac energy spectrum and inverted bandgap in metamorphic InAsSb/InSb superlattices

A Dirac-type energy spectrum was shown in gapless ultra-short-period metamorphic InAsSb/InSb superlattices by angle-resolved photoemission spectroscopy (ARPES) measurements. The Fermi velocity value 7.4x10 5 m/s in a gapless superlattice with a period of 6.2nm is in a good agreement with the results of magneto-absorption experiments. An “inverted” bandgap opens in the center of the Brillouin zone at higher temperatures and in the superlattice with a larger period. The ARPES data suggest the presence of a surface electron accumulation layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS2010

Single Spatial-Mode Room-Temperature-Operated 3.0 to 3.4 micrometer Diode Lasers

Compact, highly efficient, 3.0 to 3.4 m light emitters are in demand for spectroscopic analysis and identification of chemical substances (including methane and formaldehyde), infrared countermeasures technologies, and development of advanced infrared scene projectors. The need for these light emitters can be currently addressed either by bulky solid-state light emitters with limited power conversion efficiency, or cooled Interband Cascade (IC) semiconductor lasers. Researchers here have developed a breakthrough approach to fabrication of diode mid-IR lasers that have several advantages over IC lasers used for the Mars 2009 mission. This breakthrough is due to a novel design utilizing the strain-engineered quantum-well (QW) active region and quinternary barriers, and due to optimization of device material composition and growth conditions (growth temperatures and rates). However, in their present form, these GaSb-based laser diodes cannot be directly used as a part of sensor systems. The device spectrum is too broad to perform spectroscopic analysis of gas species, and operating currents and voltages are too high. In the current work, the emitters were fabricated as narrow-ridge waveguide index-guided lasers rather than broad stripe-gain guided multimode Fabry-Perot (FP) lasers as was done previously. These narrow-ridge waveguide mid-IR lasers exhibit much lower power consumptions, and can operate in a single spatial mode that is necessary for demonstration of single-mode distributed feedback (DBF) devices for spectroscopic applications. These lasers will enable a new generation of compact, tunable diode laser spectrometers with lower power consumption, reduced complexity, and significantly reduced development costs. These lasers can be used for the detection of HCN, C2H2, methane, and ethane.

Frez, Clifford F.↗