Search NASA⌕ Search

Engineering topics

Kirchner, J. A.

Publications and source records attributed to Kirchner, J. A..

Diurnal variations of vegetation canopy structure

The significance and magnitude of diurnal variations of vegetation canopy structure are reviewed. Diurnal leaf inclination-azimuth angle distributions of a soybean and cotton canopy were documented using a simple measurement technique. The precision of the measurements was on the order of + or -5 deg for the inclination and + or -14 deg for the azimuth. The experimental results and a review of the literature showed that this distribution can vary significantly on a diurnal basis due to vegetation type, heliotropic leaf movement, environmental conditions, and vegetation stress. The study also showed that it is erroneous to treat two separate distributions of azimuth and inclination angles rather than one three-dimensional distribution of leaf orientation. The latter distribution needs to be routinely collected in studies which document variations of diurnal spectral reflectance with changes in solar zenith angle.

Kimes, D. S.↗

Directional radiometric measurements of row-crop temperatures

The variability of directional sensor response for a cotton row crop in Phoenix, Arizona was measured for various solar zenith angles. The geometric structure of the canopy was described with regard to height, width, spacing, and shape of rows. In addition, radiometric temperature data were collected on four scene components: sunlit and shaded vegetation and sunlit and shaded soil. These data were used to test the predictions and assumptions of a modified version of the row crop model of Jackson et al. (1979), which predicts the thermal infrared response of a sensor as a function of sensor view angle, component temperature, and geometrical structure of the canopy. The field data showed sensor response differentials as great as 16.2 C when going from a zenith view angle of 0 deg to one of 80 deg normal to the row direction. The rms deviation between the predicted and measured sensor response for all measurement periods and view angles was 0.96 C.

Kimes, D. S.↗

Spectral radiance errors in remote sensing ground studies due to nearby objects

Attention is given to the error that can occur in all radiometric measurements owing to the presence of nearby objects. When a researcher positions himself on the side of a target point opposite the sun, his body gives rise to two erroneous effects. First, it blocks a portion of the incoming diffuse sky radiance to the target point, and second, it reflects incoming diffuse and direct solar irradiance and ground exitance onto the target point. It is noted that the same phenomenon occurs for any nearby object, whether it be a field truck, a building structure, or a row of trees. This error deriving from nearby objects is often not recognized by researchers or is considered insignificant with no knowledge of its magnitude. The approach taken here is to mathematically model the radiant transfers that take place between the global irradiance, panel, or scene and the object and to report the magnitude of this error for various solar zenith angles, wavelengths, size and distances of objects (steradian blockage), and spectral reflectances of the scene and object. The scene, object, and panel are assumed to be Lambertian, and the object is always located on the side of the target point opposite the sun.

Kimes, D. S.↗

Radiative transfer model for heterogeneous 3-D scenes

A general mathematical framework for simulating processes in heterogeneous 3-D scenes is presented. Specifically, a model was designed and coded for application to radiative transfers in vegetative scenes. The model is unique in that it predicts (1) the directional spectral reflectance factors as a function of the sensor's azimuth and zenith angles and the sensor's position above the canopy, (2) the spectral absorption as a function of location within the scene, and (3) the directional spectral radiance as a function of the sensor's location within the scene. The model was shown to follow known physical principles of radiative transfer. Initial verification of the model as applied to a soybean row crop showed that the simulated directional reflectance data corresponded relatively well in gross trends to the measured data. However, the model can be greatly improved by incorporating more sophisticated and realistic anisotropic scattering algorithms

Kimes, D. S.↗

Variation of directional reflectance factors with structural changes of a developing alfalfa canopy

Directional reflectance factors of an alfalfa canopy were determined and related to canopy structure, agronomic variables, and irradiance conditions at four periods during a cutting cycle. Nadir and off-nadir reflectance factors decreased with increasing biomass in Thematic Mapper band 3(0.63-0.69 micrometer) and increased with increasing biomass in band 4(0.76-0.90 micrometer). The sensor view angle had less impact on perceived reflectance as the alfalfa progressed from an erectophile canopy of stems after harvest to a near planophile canopy of leaves at maturity. Studies of directional reflectance are needed for testing and upgrading vegetation canopy models and to aid in the complex interpretation problems presented by aircraft scanners and pointable satellites where illumination and viewing geometries may vary widely. Distinct changes in the patterns of radiance observed by a sensor as structural and biomass changes occur are keys to monitoring the growth and condition of crops.

Kirchner, J. A.↗

Influence of sky radiance distribution on the ratio technique for estimating bidirectional reflectance

The technique of ratioing scene radiance to the radiance obtained from standard Lambertian reference panels in order to estimate bidirectional reflectance factors may depend on the angular distribution of the diffuse irradiance field as well as the direct solar irradiance. A simulation study was performed to estimate the magnitude of this effect for differing clear sky irradiance distributions for a variety of vegetated surfaces. For the seven surfaces and wavelengths analyzed, the error induced in the estimation of bidirectional reflectance factors using the standard ratio technique was less than 5 percent for zenith view and sun angles less than 55 degrees.

Kirchner, J. A.↗

Irradiance measurement errors due to the assumption of a Lambertian reference panel

A technique is presented for determining the error in diurnal irradiance measurements that results from the non-Lambertian behavior of a reference panel under various irradiance conditions. Spectral biconical reflectance factors of a spray-painted barium sulfate panel, along with simulated sky radiance data for clear and hazy skies at six solar zenith angles, were used to calculate the estimated panel irradiances and true irradiances for a nadir-looking sensor in two wavelength bands. The inherent errors in total spectral irradiance (0.68 microns) for a clear sky were 0.60, 6.0, 13.0, and 27.0% for solar zenith angles of 0, 45, 60, and 75 deg, respectively. The technique can be used to characterize the error of a specific panel used in field measurements, and thus eliminate any ambiguity of the effects of the type, preparation, and aging of the paint.

Kimes, D. S.↗

Simulated directional radiances of vegetation from satellite platforms

A computer modeling and simulation investigated the effects of off-nadir viewing, canopy geometry and density, solar zenith angle, and atmospheric conditions on the radiance of several vegetated targets. Effects on the normalized difference (ND) index were also investigated, and two wavelengths of 0.68 and 0.80 micron were simulated at nine sensor zenith angles, five sensor azimuths, and nine solar zenith angles. Seven canopies of low, medium, and high densities were observed, and bidirectional reflectance functions of other canopies were discussed. A modified Turner's (1974) atmospheric radiative transfer model was used for 2300 simulation runs. Off-nadir viewing effects were more pronounced in the red than the infrared, and the variability was found to be a function of canopy geometry. The ND index eliminated much of the variability seen in the individual bands, while the overall variability decreased with increasing biomass, and increased with increasing solar zenith angles.

Kirchner, J. A.↗

Modeling the effects of various radiant transfers in mountainous terrain on sensor response

A model is developed for the study of remote sensing spectral data problems encountered in mountainous terrain, where slope orientation with respect to sources of incident radiation must be considered for accurate classification of multispectral data. The model simulates the effects of solar, sky and adjacent slope irradiance fluxes and the bidirectional reflectance properties of the target surface on sensor response for various slope orientations. The errors associated with two practical techniques used to account for topographic effects on sensor response were evaluated in light of the model, and it was found that the simple cosine correction of the direct solar source showed reflectance errors greater than 11% while the technique considering both direct solar and diffuse sky sources was 50% more accurate.

Kimes, D. S.↗