Search NASA⌕ Search

Engineering topics

Kirkham, Melanie J.

Publications and source records attributed to Kirkham, Melanie J..

Chloride Reduction of Mn 3+ in Mild Hydrothermal Synthesis of a Charge Ordered Defect Pyrochlore, CsMn 2+ Mn 3+ F 6 , a Canted Antiferromagnet with a Hard Ferromagnetic Component

Geometrically frustrated systems play an important role in studying new physical phenomena and unconventional thermodynamics. Charge ordered defect pyrochlores AM 2+ M 3+ F 6 offer a convenient platform for probing the interplay between electron distribution over M 2+ and M 3+ sites and structural distortions; however, they are limited to compounds with M 2+/3+ = V, Fe, Ni, and Cu due to difficulties in the simultaneous stabilization of other 3d elements in the +2 and +3 oxidation states. Herein, we employ Cl– anions under hydrothermal conditions for the mild reduction of Mn 2 O 3 in concentrated HF to obtain the CsMn 2+ Mn 3+ F 6 composition as a phase pure sample and study its properties. The magnetism of CsMn 2 F 6 was characterized by measuring the magnetic susceptibility and isothermal magnetization data, and a magnetic transition to a canted antiferromagnet state was found at 24.1 K. We determined the magnetic structure of CsMn 2 F 6 using powder neutron diffraction, which revealed successive long-range ordering of the Mn 2+ and Mn 3+ sites that is accompanied by a second transition. As a result, the role and strength of magnetic exchange interactions were characterized using DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase evolution during lithium–indium halide superionic conductor dehydration

Select rare-earth alkali halides have demonstrated high lithium ion conductivity. The conductivity appears to be related to the stability of the crystal phase, ordering of the lithium sublattice and the amount of residual H 2 O. Li 3 InCl 6 can be synthesized from concentrated aqueous solution through controlled dehydration. In this work, we track Li 3 InCl 6 dehydration using a multimodal approach that combines thermogravimetric, spectroscopic, X-ray diffraction, and neutron scattering techniques. In situ X-ray diffraction suggests a single phase transition caused by dehydration, in disagreement with spectroscopic and thermodynamic measurements. Neutron scattering, being sensitive toward the H 2 O and Li sublattices, reveals multiple phase transitions. We show that the loss of the final trace H 2 O leads to strain and grain boundary formation. Thus, controlled dehydration may be a viable strategy for high-throughput processing for roll-to-roll manufacturing of REAH solid electrolytes.

36 MATERIALS SCIENCE↗

Incommensurate magnetism in K 2 MnS 2 – x Se x and prospects for tunable frustration in a triangular lattice of pseudo-1D spin chains

We report a detailed investigation of K 2 MnS 2 and K 2 MnSe 2 from the K 2 MnS 2 structure type and their magnetic solid solution K 2 MnS 2–x Se x and find that compounds of this structure type consist of strongly coupled pseudo-one-dimensional antiferromagnetic chains that collectively represent a frustrated two-dimensional triangular antiferromagnet. Bulk samples of K 2 MnS 2–x Se x with 0 ≤ x ≤ 2 are characterized using x-ray diffraction, neutron diffraction, magnetization, and heat-capacity measurements. An incommensurate cycloid magnetic structure with a magnetic propagation vector k = [0.5801] is observed for all samples in K 2 MnS 2–x Se x , and the ordering is robust despite a 12% increase in cell volume. Geometric frustration of chains results in incommensurability along a and a two-step magnetic transition. Here, the varying geometries accessible in compounds of this structure type are presented as promising avenues to tune frustration.

36 MATERIALS SCIENCE↗

Metastable Li 1+δ Mn 2 O 4 (0 ≤ δ ≤ 1) Spinel Phases Revealed by in Operando Neutron Diffraction and First-Principles Calculations

Here, we examine the reaction mechanisms driven by the lithiation of Li 1+δ Mn 2 O 4 (0 ≤ δ ≤ 1) spinels via in operando neutron powder diffraction (NPD). New reaction mechanisms are proposed involving solid-solution regions within both cubic and tetragonal spinel phases in addition to a continuous phase transition between them. In operando NPD is an ideal tool to follow the light elements such as lithium and oxygen in cathode materials which are often the key to fully understand their structural evolutions. Here, we report a novel methodology to prepare an extremely thick electrode with ~378 mg·cm –2 loading density suitable for the in operando NPD studies. Enabled by such thick electrode, we find that the metal oxygen M–O (M = Li and Mn) bond lengths in both end members LiMn 2 O 4 and Li 2 Mn 2 O 4 experience pronounced changes larger than dictated by the change in lattice parameters because of the locally formed Jahn–Teller distorted Mn 3+ . First-principles density functional theory calculations confirm these metastable intermediates and further propose atomistic reaction pathways for the phase transition by coupling a global structure search algorithm. In conclusion, these findings redefine the conventional understandings on two-phase reactions of this spinel material.

36 MATERIALS SCIENCE↗

Temperature-dependent Structural and Spectroscopic Studies of (Bi 1– x Fe x )FeO 3

We report on temperature-dependent structural and spectroscopic features of (Bi 1–x Fe x )FeO 3 perovskite for x = 0.15 and 0.25. Samples were synthesized by heating quantum crystalline precursors obtained by the polyol method. Crystal structures of each composition were obtained from in-house X-ray, synchrotron X-ray, and time-of-flight neutron powder diffraction data Rietveld refinements. Partial replacement of the Bi site by the Fe 3+ cation significantly changes the crystal physicochemical properties, such as thermal expansion, polyhedral distortion, Debye temperature, and vibrational and magnetic properties. Whereas BiFeO 3 is multiferroic, both Bi 0.85 Fe 0.15 FeO 3 and Bi 0.75 Fe 0.25 FeO 3 are found to be superparamagnetic, as observed by temperature-dependent Mössbauer and SQUID measurements. Lattice thermal expansion was modeled using the Debye–Einstein-anharmonicity approach. Debye temperatures obtained from the mean-squared atomic displacement parameter and lattice thermal expansion are compared. Furthermore, temperature dependence of selective Raman modes is also analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

AGES: Automated Gas Environment System for in situ neutron powder diffraction

High fluxes available at modern neutron and synchrotron sources have opened up a wide variety of in situ and operando studies of real processes using scattering techniques. This has allowed the user community to follow chemistry in the beam, which often requires high temperatures, gas flow, etc. In this paper, we describe an integrated gas handling system for the general-purpose powder diffraction beamline Powgen at the Spallation Neutron Source. The Automated Gas Environment System (AGES) allows control of both gas flow and temperature (room temperature to 850 °C), while measuring the partial pressure of oxygen and following the effluent gas by mass spectrometry, concurrent with neutron powder diffraction, in order to follow the structural evolution of materials under these conditions. The versatility of AGES is illustrated by two examples of experiments conducted with the system. In solid oxide fuel cell electrode materials, oxygen transport pathways in double perovskites PrBaCo 2 O 5+δ and NdBaCo 2 O 5+δ were elucidated by neutron diffraction measurements under atmosphere with oxygen partial pressures (pO 2 ) of 10 –1 to 10 –4 (achieved using mixtures of nitrogen and oxygen) and temperatures from 575 to 850 °C. In another example, the potential oxygen storage material La 1–x Sr x FeO 3 was measured under alternating flows of 15% CH 4 in N 2 and air (20% O 2 in N 2 ) at temperatures from 135 to 835 °C. As a result, from the oxygen stoichiometry, the optimal composition for oxygen storage was determined.

47 OTHER INSTRUMENTATION↗

Synthesis of a ferrolite: A zeolitic all-iron framework

Here, crystals of the first sodalite-type zeolite containing an all-iron framework, a ferrolite, Ba 8 (Fe 12 O 24 )Na y (OH)6 • xH 2 O, were synthesized using the hydroflux method in nearly quantitative yield. Ba 8 (Fe 12 O 24 )Na y (OH) 6 • xH 2 O crystallizes in the cubic space group Pm3¯m with α = 10.0476(1) Å. Slightly distorted FeO 4 tetrahedra are linked to form Fe 4 O 4 and Fe 6 O 6 rings, which in turn yield channels and internal cavities that are characteristic of the sodalite structure. Barium, sodium, and hydroxide ions and water molecules are found in the channels and provide charge balance. Magnetic measurements indicate that the ferrolite exhibits magnetic order up to at least 700 K, with the field-cooled and zero-field-cooled curves diverging. Analysis of the 57 Fe Mossbauer spectra revealed two spectral components that have equal spectral areas, indicating the presence of two subsets of iron centers in the structure. Dehydrated versions of the ferrolite were also prepared by heating the sample.

36 MATERIALS SCIENCE↗

Structural phase transition and phonon instability in Cu 12 Sb 4 S 13

In this study, a structural phase transition has been discovered in the synthetic tetrahedrite Cu 12 Sb 4 S 13 at approximately 88 K. Upon cooling, the material transforms from its known cubic symmetry to a tetragonal unit cell that is characterized by an in-plane ordering that leads to a doubling of the unit cell volume. Specific heat capacity measurements demonstrate a hysteresis of more than two degrees in the associated anomaly. A similar hysteresis was observed in powder x-ray diffraction measurements, which also indicate a coexistence of the two phases, and together these results suggest a first-order transition. This structural transition coincides with a recently-reported metal-insulator transition, and the structural instability is related to the very low thermal conductivity κ in these materials. Inelastic neutron scattering was used to measure the phonon density of states in Cu 12 Sb 4 S 13 and Cu 10 Zn 2 Sb 4 S 13 , both of which possess a localized, low-energy phonon mode associated with strongly anharmonic copper displacements that suppress κ. In Cu 12 Sb 4 S 13 , signatures of the phase transition are observed in the temperature dependence of the localized mode, which disappears at the structural transition. In contrast, in the cubic Zn-doped material, the mode is at slightly higher-energy but observable for all temperatures, though it softens upon cooling.

36 MATERIALS SCIENCE↗

Investigation of Surface Treatments to Improve the Friction and Wear of Titanium Alloys for Diesel Engine Components

This final report summarizes experimental and analytical work performed under an agreement between the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Transportation Technologies, and UT-Battelle LLC. The project was directed by Jerry Gibbs, of the U.S. Department of Energy’s Propulsion Materials Program, with management by D. P. Stinton and J. A. Haynes of ORNL. Participants included Peter J. Blau (Principal Investigator), Kevin M. Cooley (senior technician), Melanie J. Kirkham (materials scientist) of the Materials Science and Technology Division or ORNL, and Dinesh G. Bansal, a post doctoral fellow employed by Oak Ridge Associated Universities (ORAU) and who, at the time of this writing, is an engineer with Cummins, Inc. This report covers a three-year effort that involved two stages. In the first stage, and after a review of the literature and discussions with surface treatment experts, a series of candidate alloys and surface treatments for titanium alloy (Ti-6Al-4V) was selected for initial screening. After pre-screening using an ASTM standard test method, the more promising surface treatments were tested in Phase 2 using a variable loading apparatus that was designed and built to simulate the changing load patterns in a typical connecting rod bearing. Information on load profiles from the literature was supplemented with the help of T.C. Chen and Howard Savage of Cummins, Inc. Considering the dynamic and evolving nature of materials technology, this report presents a snapshot of commercial and experimental bearing surface technologies for titanium alloys that were available during the period of this work. Undoubtedly, further improvements in surface engineering methods for titanium will evolve.

33 ADVANCED PROPULSION SYSTEMS↗

Ab-Initio Determination of Novel Crystal Structures of the Thermoelectric Material MgAgSb

Materials with the half-Heusler structure possess interesting electrical and magnetic properties, including potential for thermoelectric applications. MgAgSb is compositionally and structurally related to many half-Heusler materials but has not been extensively studied. This work presents the high-temperature x-ray diffraction analysis of MgAgSb between 27 and 420 °C, complemented with thermoelectric property measurements. MgAgSb is found to exist in three different crystal structures in this temperature region, taking the half-Heusler structure at high temperatures, a Cu 2 Sb-related structure at intermediate temperatures, and a previously unreported tetragonal structure at room temperature. All three structures are related by a distorted Mg-Sb rocksalt-type sublattice, differing primarily in the Ag location among the available tetrahedral sites. Transition temperatures between the three phases correlate well with discontinuities in the Seebeck coefficient and electrical conductivity; the best performance occurs with the novel room temperature phase. For application of MgAgSb as a thermoelectric material, it may be desirable to develop methods to stabilize the room temperature phase at higher temperatures.

36 MATERIALS SCIENCE↗

The role of boron segregation in enhanced thermoelectric power factor of CoSi{sub 1-x}B{sub x} alloys

We report on the influence of boron segregation on the thermoelectric properties of CoSi. Contrary to previous suggestions, and in stark contrast to aluminum substitution, boron does not enter the lattice on the Si site, but rather segregates to the grain boundaries in these alloys. Through a combination of x-ray diffraction, scanning electron microscope, and scanning Auger techniques, we present clear evidence of the formation of a CoB phase at the grain boundaries. Consistent with the failure of B to substitute for Si, we observe no changes in the electron concentration or the Seebeck coefficient under boron substitution. The electrical resistivity, on the other hand, displays a non-monotonic behavior with increasing boron concentration, first decreasing for small amounts of boron, before increasing at higher levels of substitution. We attribute this behavior to a combination of an initial healing effect of boron on microcracks, followed by the eventual increase in electron scattering by the secondary CoB phase at higher concentrations.

36 MATERIALS SCIENCE↗