Search NASA⌕ Search

Engineering topics

Kislov, V I

Publications and source records attributed to Kislov, V I.

Dependence of the compensation error on the error of a sensor and corrector in an adaptive optics phase-conjugating system

In the framework of a statistical model of an adaptive optics system (AOS) of phase conjugation, three algorithms based on an integrated mathematical approach are considered, each of them intended for minimisation of one of the following characteristics: the sensor error (in the case of an ideal corrector), the corrector error (in the case of ideal measurements) and the compensation error (with regard to discreteness and measurement noises and to incompleteness of a system of response functions of the corrector actuators). Functional and statistical relationships between the algorithms are studied and a relation is derived to ensure calculation of the mean-square compensation error as a function of the errors of the sensor and corrector with an accuracy better than 10%. Because in adjusting the AOS parameters, it is reasonable to proceed from the equality of the sensor and corrector errors, in the case the Hartmann sensor is used as a wavefront sensor, the required number of actuators in the absence of the noise component in the sensor error turns out 1.5 – 2.5 times less than the number of counts, and that difference grows with increasing measurement noise. (adaptive optics)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optimisation of the parameters of a pump chamber for solid-state lasers with diode pumping by the optical boiler method

A pump chamber of the optical boiler type for solid-state lasers with transverse laser diode pumping is studied theoretically and experimentally. The pump chamber parameters are optimised using the geometrical optics approximation for the pump radiation. According to calculations, the integral absorption coefficient of the active element at a wavelength of 808 nm is 0.75 – 0.8 and the relative inhomogeneity of the pump radiation distribution over the active element volume is 17% – 19%. The developed pump chamber was used in a Nd:YAG laser. The maximum cw output power at a wavelength of 1064 nm was ∼480 W at the optical efficiency up to 19.6%, which agrees with theoretical estimates. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resonator with a back deformable mirror for the formation of a beam with a given intensity distribution

We present the results of a numerical-analytical study of formation of an output beam with a given intensity distribution for a resonator with a back deformable mirror (DM) and semitransparent spherical front mirror. Using the theory of inverse optical problems in the diffraction approximation, the basic characteristics of a laser resonator with a DM are considered as functions of the reference resonator configuration and the form of the distribution function, describing the given intensity. The laser beam formation in the reference resonator with plane-parallel and concentric configurations is compared. In the investigated resonators, the given intensity distribution is a fundamental mode; the selectivity (determined by the power losses of transverse modes) of the resonator with a DM is comparable with that of the reference resonator. It is shown that the formation of the given intensity distributions (uniform, super-Gaussian, or having several maxima) requires a DM with the amplitude of deformations of the optical surface of the order of {lambda} and the number of control channels from 1 to nearly 10.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mirror with a variable amplitude - phase reflectance. 2. Modelling of a laser resonator with an active output mirror

We present the operator model of the laser resonator with an active output mirror based on the Fabry - Perot interferometer with nonflat (spherical and aspherical) mirrors and an adjustable gap. The results of numerical simulation of a microchip laser with a thermal lens and an active output interferometer-based mirror are given. It is shown that the use of an active interferometer as the output cavity mirror allows one to control the number of transverse modes of laser radiation and its power; in this case, the beam divergence can be reduced by a factor of 1.5 - 2.5. (laser resonators)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mirror with reflectance variable in amplitude and phase. 1. Modelling of a mirror with reflectance variable in amplitude and phase

An operator model of a mirror as a reflector with a reflectance variable over the aperture is developed on the basis of a Fabry-Perot interferometer. The main characteristics of the interferometer (mirror) are studied in the geometric, diffraction, and modal approximations. The differences in the calculation results obtained using the conventional geometric approximation and the diffraction approach proposed in this study are discussed. It is shown that, when the effective Fresnel numbers are comparable to unity, it is necessary to use the diffraction approximation. The possibility of using an interferometer-based mirror as a selector of transverse laser modes is demonstrated. (laser applications and other topics in quantum electronics)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Remote laser speckle interferometry: A speckle pattern formation model

A mathematical model of laser radiation scattering from a remote rough surface illuminated by a focused laser beam is proposed. The model can be used to estimate the mean number and size of speckles and their mean and maximum intensity. Fluctuations of the speckle intensity were observed upon focusing radiation in the object plane. The magnitude of fluctuations achieves 50%-70% and depends on the object roughness and the laser beam parameters. (laser radiation scattering)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Algorithm for the field-phase distribution reconstruction in Hartmann sensor measurements

A new method for the wavefront reconstruction is described which is based on measurements of the beam intensity distributions in two cross sections and of wavefront tilts by a Hartmann sensor in one of these cross sections and makes it possible to find the field phase distribution taking into account possible phase jumps. The iteration algorithm for finding this distribution is developed and its mathematical description based on the calculation of the field in the Fresnel approximation is presented. The algorithm is studied numerically. Relations are obtained to estimate the optimal parameters of a measurement system, in particular, the distance between the cross sections and the number of subapertures of the Hartmann sensor depending on the mode composition of laser radiation. (laser beams)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗