Search NASA⌕ Search

Engineering topics

Knight, D. D.

Publications and source records attributed to Knight, D. D..

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Laser interferometer skin-friction measurements of crossing-shock-wave/turbulent-boundary-layer interactions

Wall shear stress measurements beneath crossing-shock-wave/turbulent boundary-layer interactions have been made for three interactions of different strengths. The interactions are generated by two sharp fins at symetric angles of attack mounted on a flat plate. The shear stress measurements were made for fin angles of 7 and 11 deg at Mach 3 and 15 deg at Mach 3.85. The measurements were made using a laser interferometer skin-friction meter, a device that determines the wall shear by optically measuring the time rate of thinning of an oil film placed on the test model surface. Results of the measurements reveal high skin-friction coefficients in the vicinity of the fin/plate junction and the presence of quasi-two-dimensional flow separation on the interaction center line. Additionally, two Navier-Stokes computations, one using a Baldwin-Lomax turbulence model and one using a k-epsilon model, are compared with the experimental results for the Mach 3.85, 15-deg interaction case. Although the k-epsilon model did a reasonable job of predicting the overall trend in portions of the skin-friction distribution, neither computation fully captured the physics of the near-surface flow in this complex interaction.

Garrison, T. J.↗
NASA NTRS1993

Computation of crossing shock/turbulent boundary layer interaction at Mach 8.3

A three-dimensional (3D) hypersonic crossing shock wave/turbulent boundary-layer interaction is examined numerically at Mach 8.3. The test geometry consists of a pair of opposing sharp fins of angle alpha = 15 deg, mounted on a flat plate. Two theoretical models are evaluated. The full (3D) Reynolds-averaged Navier-Stokes equations are solved using the Baldwin-Lomax and the Rodi (modified k-epsilon) turbulence models. Computed results for both cases show good agreement with experiment for flat plate surface pressure and for flowfield profiles of pitot pressure and yaw angle, indicating that the flowfield is primarily rotational and inviscid. Fair to poor agreement is obtained for surface heat transfer, indicating a need for more accurate turbulence models. The overall flowfield structure is similar to that observed in previous crossing shock interaction studies.

Narayanswami, N.↗
NASA NTRS1993

Numerical simulation of crossing/turbulent boundary layer interaction at Mach 8.3 comparison of zero and two-equation turbulence models

A 3D hypersonic crossing shock wave/turbulent boundary layer interaction is examined numerically. The test geometry consists of a pair of opposing sharp fins of angle alpha = 15 deg mounted on a flat plate. The freestream Mach number is 8.28. Two theoretical models are evaluated. The full 3D Reynolds-averaged Navier-Stokes equations are solved using the Baldwin-Lomax algebraic turbulent eddy viscosity model and the Rodi turbulence model. Computed results for both cases show good agreement with experiment for flat plate surface pressure and for pitot pressure and yaw angle profiles in the flowfield. General agreement is obtained for surface flow direction. Fair to poor agreement is obtained for surface heat transfer, indicating a need for more accurate turbulence models. The overall flowfield structure is similar to that observed in previous crossing shock interaction studies.

Narayanswami, N.↗
NASA NTRS1993

Investigation of a hypersonic crossing shock wave/turbulent boundary layer interaction

A combined theoretical and experimental study is presented for the interaction between crossing shock waves generated by (10 deg, 10 deg) sharp fins and a flat plate turbulent boundary layer at Mach 8.3. The theoretical model is the full 3D mean compressible Reynolds-averaged Navier-Stokes (RANS) equations incorporating the algebraic turbulent eddy viscosity model of Baldwin and Lomax (1978). A grid refinement study indicated that adequate resolution of the flow field has been achieved. Computed results agree well with experiment for surface pressure and surface flow patterns and for pitot pressure and yaw angle profiles in the flow field. The computations, however, significantly overpredict surface heat transfer. Analysis of the computed flow field results indicates the formation of complex streamline and wave structures within the interaction region.

Narayanswami, N↗
NASA NTRS1991

Crossing shock wave-turbulent boundary layer interactions

Three-dimensional interactions between crossing shock waves generated by symmetric sharp fins and a turbulent boundary layer on a flat plate are investigated experimentally and theoretically at Mach number 2.95 and freestream unit Reynolds number 1.96 x 10 to the 7th/ft. The incoming boundary layer has a thickness of 4 mm at the location of the fin leading edges. A comparison of experimental and computational results for two sets of fin angles (11 x 11 and 9 x 9 deg) shows general agreement with regard to surface pressure measurements and surface streamline patterns. The principal feature of the streamline structure is a collision of counterrotating vortical structures emanating from near the fin leading edges and meeting at the geometric centerline of the interaction.

Narayanswami, N.↗
NASA NTRS1986

The flowfield structure of the 3-D shock wave - Boundary layer interaction generated by a 20 deg sharp fin at Mach 3

The three-dimensional oblique shock wave-turbulent boundary layer interaction generated by a sharp fin attached to a flat plate is investigated experimentally and theoretically for Mach 3 and Reynolds number 9 x 10 to the 5th using two different models. Both models employ the three-dimensional compressible Navier-Stokes equations in mass-averaged variables; one model utilizes the algebraic turbulent eddy viscosity model of Baldwin and Lomax (1978), while the other model employs the two-equation turbulence model of Jones and Launder (1972) coupled with the wall function model of Viegas and Rubesin (1985). The computed surface pressure, surface streamlines, pitot pressure, and yaw angle profiles are found to be in good agreement with experimental data. The three-dimensional velocity fields computed by both models are in close agreement, although the eddy viscosity profiles differ significantly within the three-dimensional interaction. This result indicates that the overall structure of this three-dimensional sharp fin interaction is insensitive to the turbulence model.

Knight, D. D.↗
NASA NTRS1985

Modelling of three-dimensional shock wave turbulent boundary layer interactions

The accuracy of numerical computations of the three-dimensional sharp fin flow field using the Reynolds-averaged Navier-Stokes equations is examined. Computed flows are compared with a set of benchmark experiments at Mach 3 for two different Reynolds numbers. A detailed comparison is performed between experimental data and separate computational results for the three-dimensional sharp fin for a 10 deg fin angle in order to examine the accuracy of two different turbulence models. The computed surface pressure for the fin at a 20 deg angle is compared with recent experimental data. The computed yaw angle profiles are shown to be sensitive to the turbulence model. In the immediate vicinity of the surface, the calculated results using the Baldwin-Lomax (1978) model are in better agreement with the data than the Jones-Launder (1972) model. Within the inner portion of the boundary layer, both models tend to underpredict the yaw angle.

Knight, D. D.↗
NASA NTRS1983

Calculation of a simulated 3-D high speed inlet using the Navier-Stokes equations

A hybrid numerical algorithm, developed to solve the full three-dimensional Navier-Stokes equations, is applied to the computation of the flowfield in a simulated three-dimensional high speed aircraft inlet at a Mach number of 2.5 and Reynolds number of 1.4 x 10 to the 7th based on inlet length. The numerical algorithm incorporates a coordinate transformation in order to handle general flow geometries, and utilizes the algebraic turbulent eddy viscosity model of Baldwin and Lomax. The hybrid algorithm has been vectorized on the CDC CYBER 203 computer using the SL/1 vector programming language developed at NASA Langley. The computed results are compared with experimental measurements of the ramp and cowl static pressures, and boundary layer pitot profiles. The results are also compared with a previous two-dimensional Navier-Stokes computation of the same configuration. The agreement with the experimental data is generally good; however, additional improvements in turbulence modeling are needed.

Knight, D. D.↗
NASA NTRS1973

Graphite oxidation at low temperature in subsonic air.

Coupled mass loss and heat transfer was studied experimentally for thin two inch diameter graphite disks heated as high as 2800 F in a flow of ambient air at velocities of 97 to 717 ft/sec. Oxidation was predominately reaction rate controlled with rate constants which were determined experimentally for POCO AXF 5Q, ATJ, ATJS, and an AVCO 3D Orthogonal material. The specimen thermal response was used with an energy balance to obtain the influence of mass loss and chemical reactions on the heat transfer. Specimen heating due to exothermic reactions correlates qualitatively with an approximate theory.

Knight, D. D.↗