Search NASA⌕ Search

Engineering topics

Kobayashi, N

Publications and source records attributed to Kobayashi, N.

SU-E-T-455: Impact of Different Independent Dose Verification Software Programs for Secondary Check

Purpose: There have been many reports for different dose calculation algorithms for treatment planning system (TPS). Independent dose verification program (IndpPro) is essential to verify clinical plans from the TPS. However, the accuracy of different independent dose verification programs was not evident. We conducted a multi-institutional study to reveal the impact of different IndpPros using different TPSs. Methods: Three institutes participated in this study. They used two different IndpPros (RADCALC and Simple MU Analysis (SMU), which implemented the Clarkson algorithm. RADCALC needed the input of radiological path length (RPL) computed by the TPSs (Eclipse or Pinnacle3). SMU used CT images to compute the RPL independently from TPS). An ion-chamber measurement in water-equivalent phantom was performed to evaluate the accuracy of two IndpPros and the TPS in each institute. Next, the accuracy of dose calculation using the two IndpPros compared to TPS was assessed in clinical plan. Results: The accuracy of IndpPros and the TPSs in the homogenous phantom was +/−1% variation to the measurement. 1543 treatment fields were collected from the patients treated in the institutes. The RADCALC showed better accuracy (0.9 ± 2.2 %) than the SMU (1.7 ± 2.1 %). However, the accuracy was dependent on the TPS (Eclipse: 0.5%, Pinnacle3: 1.0%). The accuracy of RADCALC with Eclipse was similar to that of SMU in one of the institute. Conclusion: Depending on independent dose verification program, the accuracy shows systematic dose accuracy variation even though the measurement comparison showed a similar variation. The variation was affected by radiological path length calculation. IndpPro with Pinnacle3 has different variation because Pinnacle3 computed the RPL using physical density. Eclipse and SMU uses electron density, though.

60 APPLIED LIFE SCIENCES↗

CONSTRAINING STELLAR PROPERTIES OF INTERVENING DAMPED Ly{alpha} AND Mg II ABSORBING GALAXIES TOWARD GRB 050730

We performed multiband deep imaging of the field around GRB 050730 to identify the host galaxies of intervening absorbers, which consist of a damped Ly{alpha} absorption (DLA) system at z{sub abs} = 3.564, a sub-DLA system at z{sub abs} = 3.022, and strong Mg II absorption systems at z{sub abs} = 1.773 and 2.253. Our observations were performed after the gamma-ray burst afterglow had disappeared. Thus, our imaging survey has a higher sensitivity to the host galaxies of the intervening absorbers than the normal imaging surveys in the direction of QSOs, for which the QSO glare tends to hide the foreground galaxies. In this deep imaging survey, we could not detect any unambiguous candidates for the host galaxies of the intervening absorbers. Using the 3{sigma} upper limit of the flux in the optical to mid-infrared observing bands, which corresponds to the UV to optical bands in the rest frame of the intervening absorbers, we constrained the star formation rates and stellar masses of the hosts. We estimated the star formation rates for the intervening absorbers to be {approx}< 2.5 M{sub Sun} yr{sup -1} for z > 3 DLAs and {approx}< 1.0 M{sub Sun} yr{sup -1} for z {approx} 2 Mg II systems. Their stellar masses are estimated to be several times 10{sup 9} M{sub Sun} or smaller for all intervening galaxies. These properties are comparable to dwarf galaxies, rather than the massive star-forming galaxies commonly seen in the z > 2 galaxy surveys based on emission-line selection or color selection.

79 ASTRONOMY AND ASTROPHYSICS↗

High power millimeter wave experiment of ITER relevant electron cyclotron heating and current drive system

High power, long pulse millimeter (mm) wave experiments of the RF test stand (RFTS) of Japan Atomic Energy Agency (JAEA) were performed. The system consists of a 1 MW/170 GHz gyrotron, a long and short distance transmission line (TL), and an equatorial launcher (EL) mock-up. The RFTS has an ITER-relevant configuration, i.e., consisted by a 1 MW-170 GHz gyrotron, a mm wave TL, and an EL mock-up. The TL is composed of a matching optics unit, evacuated circular corrugated waveguides, 6-miter bends, an in-line waveguide switch, and an isolation valve. The EL-mock-up is fabricated according to the current design of the ITER launcher. The Gaussian-like beam radiation with the steering capability of 20 deg. - 40 deg. from the EL mock-up was also successfully proved. The high power, long pulse power transmission test was conducted with the metallic load replaced by the EL mock-up, and the transmission of 1 MW/800 s and 0.5 MW/1000 s was successfully demonstrated with no arcing and no damages. The transmission efficiency of the TL was 96%. The results prove the feasibility of the ITER electron cyclotron heating and current drive system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

'DARK' GRB 080325 IN A DUSTY MASSIVE GALAXY AT z {approx} 2

We present optical and near-infrared observations of Swift GRB 080325 classified as a 'dark gamma-ray burst (GRB)'. Near-infrared observations with Subaru/MOIRCS provided a clear detection of afterglow in the K{sub s} band, although no optical counterpart was reported. The flux ratio of rest-wavelength optical to X-ray bands of the afterglow indicates that the dust extinction along the line of sight to the afterglow is A{sub V} = 2.7-10 mag. This large extinction is probably the major reason for the optical faintness of GRB 080325. The J - K{sub s} color of the host galaxy, (J - K{sub s} = 1.3 in AB magnitude), is significantly redder than those for typical GRB hosts previously identified. In addition to J and K{sub s} bands, optical images in B, R{sub c} , i', and z' bands with Subaru/Suprime-Cam were obtained at about 1 year after the burst, and a photometric redshift of the host is estimated to be z {sub photo} = 1.9. The host luminosity is comparable to L* at z {approx} 2 in contrast to the sub-L* property of typical GRB hosts at lower redshifts. The best-fit stellar population synthesis model for the host shows that the red nature of the host is attributed to a large dust extinction (A{sub V} = 0.8 mag), and that the host galaxy is massive (M* = 7.0 x 10{sup 10} M {sub sun}), which makes it one of the most massive GRB hosts yet identified. By assuming that the mass-metallicity relation for star-forming galaxies at z {approx} 2 is applicable for the GRB host, this large stellar mass suggests the high-metallicity environment around GRB 080325, consistent with inferred large extinction.

79 ASTRONOMY AND ASTROPHYSICS↗

Exploring the 'island of inversion' by in-beam gamma-ray spectroscopy of the neutron-rich sodium isotopes {sup 31,32,33}Na

The structure of the neutron-rich sodium isotopes {sup 31,32,33}Na was investigated by means of in-beam gamma-ray spectroscopy following one-neutron knockout and inelastic scattering of radioactive beams provided by the RIKEN Radioactive Ion Beam Factory. The secondary beams were selected and separated by the fragment separator BigRIPS and incident at approx =240 MeV/nucleon on a natural carbon (secondary) target, which was surrounded by the DALI2 array to detect coincident de-excitation gamma rays. Scattered particles were identified by the spectrometer ZeroDegree. In {sup 31}Na, a new decay gamma ray was observed in coincidence with the known (5/2{sub 1}{sup +})->3/2{sub g.s.}{sup (+)} transition, while for {sup 32,33}Na excited states are reported for the first time. From a comparison to state-of-the-art shell-model calculations it is concluded that the newly observed excited state in {sup 31}Na belongs to a rotational band formed by a 2p2h intruder configuration within the 'Island of Inversion.'

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Local effect of magnetic impurities on superconductivity in Co{sub x}NbSe{sub 2} and Mn{sub x}NbSe{sub 2} single crystals.

We investigate the effect of individual atomic impurities on the superconducting state that they are embedded in. Using low temperature scanning tunneling microscopy and spectroscopy we could identify Co and Mn atoms in the Co{sub x}NbSe{sub 2} and Mn{sub x}NbSe{sub 2} single crystals and observe the influence on the local electronic density of states (LDOS) at 0.4 K. We find that Co is in the weak scattering limit. In this case the LDOS is quite homogeneous on the sample surface, despite the number of defects, and retains sharp coherent superconducting peaks. This is in strong contrast to the effects of Mn impurities, which locally destroy superconductivity. In this case the LDOS shows a strong enhancement of spectral weight inside the superconducting gap even far from the Mn atoms. Moreover, two impurity bound states are found within the superconducting gap at E/{Delta}{sub 0} = 0.18 and 0.36 at locations close to defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Halo Structure of the Island of Inversion Nucleus {sup 31}Ne

The cross sections for single-neutron removal from the very neutron-rich nucleus {sup 31}Ne on Pb and C targets have been measured at 230 MeV/nucleon using the RIBF facility at RIKEN. The deduced large Coulomb breakup cross section of 540(70) mb is indicative of a soft E1 excitation. Comparison with direct-breakup model calculations suggests that the valence neutron of {sup 31}Ne occupies a low-l orbital (most probably 2p{sub 3/2}) with a small separation energy (S{sub n} < or approx. 0.8 MeV), instead of being predominantly in the 1f{sub 7/2} orbital as expected from the conventional shell ordering. These findings suggest that {sup 31}Ne is the heaviest halo system known.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

ECRH System For ITER

A 26 MW Electron Cyclotron Heating and Current Drive (EC H and CD) system is to be installed for ITER. The main objectives are to provide, start-up assist, central H and CD and control of MHD activity. These are achieved by a combination of two types of launchers, one located in an equatorial port and the second type in four upper ports. The physics applications are partitioned between the two launchers, based on the deposition location and driven current profiles. The equatorial launcher (EL) will access from the plasma axis to mid radius with a relatively broad profile useful for central heating and current drive applications, while the upper launchers (ULs) will access roughly the outer half of the plasma radius with a very narrow peaked profile for the control of the Neoclassical Tearing Modes (NTM) and sawtooth oscillations. The EC power can be switched between launchers on a time scale as needed by the immediate physics requirements. A revision of all injection angles of all launchers is under consideration for increased EC physics capabilities while relaxing the engineering constraints of both the EL and ULs. A series of design reviews are being planned with the five parties (EU, IN, JA, RF, US) procuring the EC system, the EC community and ITER Organization (IO). The review meetings qualify the design and provide an environment for enhancing performances while reducing costs, simplifying interfaces, predicting technology upgrades and commercial availability. In parallel, the test programs for critical components are being supported by IO and performed by the Domestic Agencies (DAs) for minimizing risks. The wide participation of the DAs provides a broad representation from the EC community, with the aim of collecting all expertise in guiding the EC system optimization. Still a strong relationship between IO and the DA is essential for optimizing the design of the EC system and for the installation and commissioning of all ex-vessel components when several teams from several DAs will be involved together in the tests on the ITER site.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Resent Status of ITER Equatorial Launcher Development

The ITER equatorial launcher is divided into a front shield and a port plug. The front shield is composed of fourteen blanket shield modules so as to form three openings for the injection of mm-wave beams into plasma. Twenty-four waveguide transmission lines, internal shields, cooling pipes and so on are installed in the port plug. The transmission lines consist of the corrugated waveguides, miter bends and the free space propagation region utilizing two mirrors in front of the waveguide outlet. The analysis of mm-wave beam propagation in the region shows that the transmission efficiency more than 99.5% is attained. The high power experiments of the launcher mock-up have been carried out and the measured field patterns at each mirror and the outlet of the launcher are agreed with the calculations. It is concluded that the transmission line components in the launcher mock-up are fabricated as designed and the present mm-wave design in the launcher is feasible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗