Oxide Acidity Modulates Structural Transformations in Hydrogen Titanates during Electrochemical Li-Ion Insertion
Explore the source record for details and available documents.
Saeed, Saeed↗
Engineering topics
Kobayashi, Takeshi
Publications and source records attributed to Kobayashi, Takeshi.
Mechanism and Kinetics of Ethanol–Acetaldehyde Conversion to 1,3-Butadiene over Isolated Lewis Acid La Sites in Silanol Nests in Dealuminated Beta Zeolite
Biomass-derived ethanol (EtOH) and acetaldehyde (AcH) conversion to 1,3-butadiene (1,3-BD) is an alternative process for 1,3-BD production. The present investigation reports the preparation and characterization of isolated La sites introduced into the silanol nests in DeAlBEA as well as detailed studies of the mechanism and kinetics for the conversion of an EtOH-AcH mixture to 1,3-BD. La sites supported on DeAlBEA are found to be present as (≡SiO) 2 La-OH groups that are H-bonded with adjacent Si-OH groups, possessing high C-C coupling activity and stability, superior to state-of-the-art Y-DeAlBEA. La sites supported on silica (La-SiO 2 ) with a similar chemical structure but no H-bonding interaction with Si-OH groups were prepared for comparison. Lewis acid La sites promote AcH aldol condensation, and the activity of such sites is nearly identical for both La-DeAlBEA and La-SiO 2 . Further, the rate of C 4 product formation increases by a factor of 4.8 upon addition of EtOH to the feed of AcH over La-DeAlBEA, whereas that over La/SiO 2 remains unchanged. Investigation of the mechanism and kinetics of AcH aldol condensation and EtOH-AcH conversion to 1,3-BD revealed two C-C bond forming pathways-AcH aldol condensation by Lewis acid La sites and direct coupling of EtOH-AcH over H-bonded (≡SiO) 2 La-OH···HO-Si≡ sites. This study provides important information about the role of the local environment of isolated Lewis acid sites and their effects on the direct coupling of EtOH and AcH to form 1,3-BD.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
One-Step Spark Plasma Erosion Processing of Carbon-Coated Sn-Si Nanoparticles for Lithium-Ion Battery Anodes
High density portable energy storage is desirable owing to the energy requirements of portable electronics and electric vehicles. The Li-ion battery’s high energy density could be even further improved through the utilization of alternative materials (instead of carbon) for the anode, such as Sn or Si. Nonetheless, the large volume expansion upon lithiation, up to ~300% for Li 22 Si 5 , causes pulverization and rapid capacity degradation during cycling. Sn also forms a Li 22 Sn 5 compound with the equivalent stoichiometric Li capacity but with enhanced ductility. Nano-sized Si and Sn have demonstrated distinctive nanoscale properties, facilitating the retention of higher capacities, particularly when coated with carbon, which improves mechanical stability. To date, the methods of synthesizing coated Si, Sn, or Si-Sn alloyed nanoparticles are complicated, costly, and not readily scalable to meet the demands of cost-effective manufacturing. Spark plasma erosion in a hydrocarbon dielectric has been explored as a one-step process to produce Sn-Si alloy nanoparticles coated with a thin carbon film, offering a scalable and cost-effective processing route. The resulting Sn-Si particles exhibited a bi-modal size distribution at ~5 nm and ~500 nm and were carbon-coated, as intended, from the hydrocarbon dielectric breakdown. The spark-eroded nanoparticles were thoroughly characterized using TEM/EDS, XPS, AES, SSNMR, and TGA, and their improved electrochemical performance was assessed through half-cell experiments.
25 ENERGY STORAGE↗
Insights into Dopant-Mediated Tuning of Silica-Supported Mo Metal Centers for Enhanced Olefin Metathesis
Here, we show that the electronic environment around active Mo centers supported on mesoporous silicates can be tuned by the addition of transition metals creating highly dispersed bimetallic catalysts that display enhanced activity for ethylene + 2-butene metathesis to propylene. The bimetallic catalysts are prepared by incorporating electrophilic Lewis acid metals (M) such as Nb, Ta, Zr, or Hf as dopant promoters into mesoporous KIT-6 supports using a one-pot sol–gel technique followed by impregnation of the Mo species. All the bimetallic Mo/M-KIT-6 catalysts display better activity than monometallic Mo/KIT-6 catalyst (28.7 ± 1.1 mmol (mol Mo s ) –1 ), with (Mo/Nb-KIT-6) catalysts exhibiting maximum propylene formation rates (54.2 ± 0.5 mmol (mol Mo s ) –1 ) at an identical Mo loading.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Rapid Polyolefin Plastic Hydrogenolysis Mediated by Single-Site Heterogeneous Electrophilic/Cationic Organo-group IV Catalysts
A homologous series of cationic electrophilic group IV metal hydrides (M = Ti, Zr, Hf) created by chemisorption of the corresponding MNp 4 precursors on highly Brønsted acidic sulfated alumina (AlS) to yield loosely coordinated surface AlS/MNp 2 (Np = neopentyl) species are systematically characterized by ICP, EXAFS/XANES, DRIFTS, and solid-state high-resolution multidimensional NMR spectroscopy (SSNMR), as well as by energy span DFT computation. With effective stirring, these complexes readily undergo reaction with H 2 to yield AlS/M(alkyl)H species, which are highly active for the hydrogenolysis of diverse commercial polyethylenes, α-olefin-ethylene copolymers, isotactic polypropylene, and postconsumer polyolefins including high-density polyethylenes, yielding medium and small linear and branched hydrocarbons at turnover frequencies as high as 36,300 h –1 at 200 °C/17 atm H 2 for M = Zr. For given polyolefin and reaction conditions, turnover frequencies scale approximately as M = Zr > Hf > Ti, whereas catalyst thermal stability scales approximately as M = Hf ≈ Zr > Ti, and these trends are qualitatively understandable from the DFT analysis. These catalytic results reveal that the AlS/Hf(R)H-mediated hydrogenolysis favors wax-like and liquid products, whereas the AlS/Zr(R)H-mediated hydrogenolysis can be tuned between gases and liquids. Finally, DFT analysis identifies β-alkyl elimination as the turnover-limiting C–C scission process, which is particularly facile in these cationic d 0 complexes but not so in the neutrally charged analogues.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Rapid Polyolefin Hydrogenolysis by a Single‐Site Organo‐Tantalum Catalyst on a Super‐Acidic Support: Structure and Mechanism
Abstract The novel electrophilic organo‐tantalum catalyst AlS/TaNp x ( 1 ) (Np=neopentyl) is prepared by chemisorption of the alkylidene Np 3 Ta=CH t Bu onto highly Brønsted acidic sulfated alumina (AlS). The proposed catalyst structure is supported by EXAFS, XANES, ICP, DRIFTS, elemental analysis, and SSNMR measurements and is in good agreement with DFT analysis. Catalyst 1 is highly effective for the hydrogenolysis of diverse linear and branched hydrocarbons, ranging from C2 to polyolefins. To the best of our knowledge, 1 exhibits one of the highest polyolefin hydrogenolysis activities (9,800 (CH 2 units) ⋅ mol(Ta) −1 ⋅ h −1 at 200 °C/17 atm H 2 ) reported to date in the peer‐reviewed literature. Unlike the AlS/ZrNp 2 analog, the Ta catalyst is more thermally stable and offers multiple potential C−C bond activation pathways. For hydrogenolysis, AlS/TaNp x is effective for a wide variety of pre‐ and post‐consumer polyolefin plastics and is not significantly deactivated by standard polyolefin additives at typical industrial concentrations.
Lai, Qingheng↗
Rapid Polyolefin Hydrogenolysis by a Single‐Site Organo‐Tantalum Catalyst on a Super‐Acidic Support: Structure and Mechanism
The novel electrophilic organo-tantalum catalyst AlS/TaNp x (1) (Np=neopentyl) is prepared by chemisorption of the alkylidene Np 3 Ta=CH t Bu onto highly Brønsted acidic sulfated alumina (AlS). Here, the proposed catalyst structure is supported by EXAFS, XANES, ICP, DRIFTS, elemental analysis, and SSNMR measurements and is in good agreement with DFT analysis. Catalyst 1 is highly effective for the hydrogenolysis of diverse linear and branched hydrocarbons, ranging from C2 to polyolefins. To the best of our knowledge, 1 exhibits one of the highest polyolefin hydrogenolysis activities (9,800 (CH 2 units) ⋅ mol(Ta) −1 ⋅ h −1 at 200 °C/17 atm H 2 ) reported to date in the peer-reviewed literature. Unlike the AlS/ZrNp 2 analog, the Ta catalyst is more thermally stable and offers multiple potential C−C bond activation pathways. For hydrogenolysis, AlS/TaNp x is effective for a wide variety of pre- and post-consumer polyolefin plastics and is not significantly deactivated by standard polyolefin additives at typical industrial concentrations.
03 NATURAL GAS↗
Machine-learning-assisted material discovery of oxygen-rich highly porous carbon active materials for aqueous supercapacitors
Abstract Porous carbons are the active materials of choice for supercapacitor applications because of their power capability, long-term cycle stability, and wide operating temperatures. However, the development of carbon active materials with improved physicochemical and electrochemical properties is generally carried out via time-consuming and cost-ineffective experimental processes. In this regard, machine-learning technology provides a data-driven approach to examine previously reported research works to find the critical features for developing ideal carbon materials for supercapacitors. Here, we report the design of a machine-learning-derived activation strategy that uses sodium amide and cross-linked polymer precursors to synthesize highly porous carbons (i.e., with specific surface areas > 4000 m 2 /g). Tuning the pore size and oxygen content of the carbonaceous materials, we report a highly porous carbon-base electrode with 0.7 mg/cm 2 of electrode mass loading that exhibits a high specific capacitance of 610 F/g in 1 M H 2 SO 4 . This result approaches the specific capacitance of a porous carbon electrode predicted by the machine learning approach. We also investigate the charge storage mechanism and electrolyte transport properties via step potential electrochemical spectroscopy and quasielastic neutron scattering measurements.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanistic Insights into Processive Polyethylene Hydrogenolysis through In Situ NMR
Chemical polymer upcycling by processive catalysts is a promising plastic waste remediation strategy, with the capability of producing selective, high-value products from waste plastics with minimal energy input. We previously designed a novel processive catalyst with a mesoporous SiO 2 shell/Pt nanoparticle/SiO 2 core architecture (mSiO 2 /Pt/SiO 2 ) that deconstructs polyolefins within narrow pores. Here, in this paper, we elucidate the mechanism of processive polyolefin hydrogenolysis using in situ magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy and coarse-grained molecular dynamics simulations. We observe that most polyethylene–Pt interactions do not lead to C–C bond cleavage but rather to the release of the polymer via a dehydrogenation–rehydrogenation cycle. The porous architecture increases the likelihood that a released polymer is later cleaved and enables the catalyst to perform multiple successive cleavages to the same polymer chain. Both experiment and simulation show that the extent of processivity is strongly correlated with the length of the pores, with longer pores leading to a higher processivity.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Construction of Boron‐ and Nitrogen‐Enriched Nanoporous π‐Conjugated Networks Towards Enhanced Hydrogen Activation
Abstract Boron‐enriched scaffolds have demonstrated unique features and promising performance in the field of catalysis towards the activation of small gas molecules. However, there is still a lack of facile approaches capable of achieving high B doping and abundant porous channels in the targeted catalysts. Herein, construction of boron‐ and nitrogen‐enriched nanoporous π‐conjugated networks (BN‐NCNs) was achieved via a facile ionothermal polymerization procedure with hexaazatriphenylenehexacarbonitrile [HAT(CN) 6 ] sodium borohydride as the starting materials. The as‐produced BN‐NCN scaffolds were featured by high heteroatoms doping (B up to 23 wt. % and N: up to 17 wt. %) and permanent porosity (surface area up to 759 m 2 g −1 mainly contributed by micropores). With the unsaturated bonded B species acting as the active Lewis acid sites and defected N species acting as the active Lewis base sites, those BN‐NCNs delivered attractive catalytic performance towards H 2 activation/dissociation in both gaseous and liquid phase, acting as efficient metal‐free heterogeneous frustrated Lewis pairs (FLPs) catalysts in hydrogenation procedures.
Li, Meijia↗
Determination of the mutual orientation between proton CSA tensors mediated through band-selective 1 H– 1 H recoupling under fast MAS
We report the mutual orientation of nuclear spin interaction tensors provides critical information on the conformation and arrangement of molecules in chemicals, materials, and biological systems at an atomic level. Proton is a ubiquitous and important element in a variety of substances, and its NMR is highly sensitive due to their virtually 100% natural abundance and large gyromagnetic ratio. Nevertheless, the measurement of mutual orientation between the 1 H CSA tensors has remained largely untouched in the past due to strong 1 H– 1 H homonuclear interactions in a dense network of protons. In this study, we have developed a proton-detected 3D 1 H CSA/ 1 H CSA/ 1 H CS correlation method that utilizes three techniques to manage homonuclear interactions, namely fast magic-angle spinning, windowless C-symmetry-based CSA recoupling (windowless-ROCSA), and a band-selective 1 H– 1 H polarization transfer. The asymmetric 1 H CSA/ 1 H CSA correlated powder patterns produced by the C-symmetry-based methods are highly sensitive to the sign and asymmetry parameter of the 1 H CSA, and the Euler angle β as compared to the symmetric pattern obtained by the existing γ-encoded R-symmetry-based CSA/CSA correlation methods and allows a larger spectral area for data fitting. These features are beneficial for determining the mutual orientation between the nuclear spin interaction tensors with improved accuracy.
1H CSA↗
Construction of Boron- and Nitrogen-Enriched Nanoporous π-Conjugated Networks Towards Enhanced Hydrogen Activation
Boron-enriched scaffolds have demonstrated unique features and promising performance in the field of catalysis towards the activation of small gas molecules. However, there is still a lack of facile approaches capable of achieving high B doping and abundant porous channels in the targeted catalysts. Here, in this paper, construction of boron- and nitrogen-enriched nanoporous π-conjugated networks (BN-NCNs) was achieved via a facile ionothermal polymerization procedure with hexaazatriphenylenehexacarbonitrile [HAT(CN) 6 ] sodium borohydride as the starting materials. The as-produced BN-NCN scaffolds were featured by high heteroatoms doping (B up to 23 wt. % and N: up to 17 wt. %) and permanent porosity (surface area up to 759 m 2 g -1 mainly contributed by micropores). With the unsaturated bonded B species acting as the active Lewis acid sites and defected N species acting as the active Lewis base sites, those BN-NCNs delivered attractive catalytic performance towards H 2 activation/dissociation in both gaseous and liquid phase, acting as efficient metal-free heterogeneous frustrated Lewis pairs (FLPs) catalysts in hydrogenation procedures.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Determination of the relative orientation between 15 N- 1 H dipolar coupling and 1 H chemical shift anisotropy tensors under fast MAS solid-state NMR
Here, in this work, we have proposed a proton-detected three-dimensional (3D) 15 N- 1 H dipolar coupling (DIP)/ 1 H chemical shift anisotropy (CSA)/ 1 H chemical shift (CS) correlation experiment to measure the relative orientation between the 15 N- 1 H dipolar coupling and the 1 H CSA tensors under fast magic angle spinning (MAS) solid-state NMR. In the 3D correlation experiment, the 15 N- 1 H dipolar coupling and 1 H CSA tensors are recoupled using our recently developed windowless C-symmetry-based $C3^{1}_{3}$-ROCSA (recoupling of chemical shift anisotropy) DIPSHIFT and $C3^{1}_{3}$-ROCSA pulse-based methods, respectively. The 2D 15 N- 1 H DIP/ 1 H CSA powder lineshapes extracted using the proposed 3D correlation method are shown to be sensitive to the sign and asymmetry of the 1 H CSA tensor, a feature that allows the determination of the relative orientation between the two correlating tensors with improved accuracy. The experimental method developed in this study is demonstrated on a powdered U- 15 N L-Histidine.HCl·H 2 O sample.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Construction of Nitrogen-abundant Graphyne Scaffolds via Mechanochemistry-Promoted Cross-Linking of Aromatic Nitriles with Carbide Toward Enhanced Energy Storage
The 2D graphyne-related scaffolds linked by carbon–carbon triple bonds have demonstrated promising applications in the field of catalysis and energy storage due to their unique features including high conductivity, permanent porosity, and electron-rich properties. However, the construction of related scaffolds is still mainly limited to the cross-linking of CaC 2 with multiple substituted aromatic halogens and there is still a lack of efficient methodology capable of introducing high-concentration heteroatoms within the architectures. The development of alternative and facile synthesis procedures to afford nitrogen-abundant graphyne materials is highly desirable yet challenging in the field of energy storage, particularly via the facile mechanochemical procedure under neat and ambient conditions. Here, in this study, graphyne materials with abundant nitrogen-containing species (nitrogen content of 6.9–29.3 wt.%), tunable surface areas (43–865 m 2 g -1 ), and hierarchical porosity are produced via the mechanochemistry-driven pathway by deploying highly electron-deficient multiple substituted aromatic nitriles as the precursors, which can undergo cross-linking reaction with CaC 2 to afford the desired nitrogen-doped graphyne scaffolds efficiently. Unique structural features of the as-synthesized materials contributed to promising performance in supercapacitor-related applications, delivering high capacitance of 254.5 F g -1 at 5 mV s -1 , attractive rate performance, and good long-term stability.
25 ENERGY STORAGE↗
Spatial arrangement of dynamic surface species from solid-state NMR and machine learning-accelerated MD simulations
Here, the surface arrangement of motional organic functionalities is explored by experimental dipolar coupling measurements and the prediction of motionally-averaged coupling constant from molecular dynamics simulations. The use of machine learning potentials was key to reaching the timescale required. The distance between dynamic surface species are important in cooperative heterogeneous catalysis.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Investigating the impact of micropore volume of aminosilica functionalized SBA-15 on catalytic activity for amine-catalyzed reactions
Mesoporous materials such as SBA-15 are used in many applications since the materials are robust and have tunable properties. Whereas these materials are thought to be ideal, the materials are complex with the common synthesis methods producing materials that contain micropores. This work will investigate the impact of micropores on catalytic activity of aminosilica materials. For comparison, materials are formed using a standard method that produces materials with micropores (REG-SBA-15) and using a modified method that produces materials with negligible micropore volume (NMP-SBA-15). After grafting the calcined support with an aminosilane (either (N-methyl amino propyl) trimethoxy silane (denoted as 2°Am) or (N,N-diethyl-3-amino propyl) trimethoxy silane (3°Am)), catalytic testing experiments reveal that NMP-SBA-15 functionalized materials are more active than REG-SBA-15 functionalized materials for a range of reactions. The reactions include (a) glucose isomerization where amines interacting with surface silanols limit catalytic activity and (b) aldol and Knoevenagel chemistry where amine-silanol interactions increase the reaction rate. For aldol chemistry, the observed difference in rate is further investigated using site quantification experiments. Interestingly, the results reveal that three types of sites exist for each material, including sites that are (1) highly active, (2) intermediate active, and (3) inactive. Additionally, NMR experiments indicate that amines immobilized on REG-SBA-15 supports are less mobile than amines on NMP-SBA-15. For REG-SBA-15, the materials are found to have aminosilanes that have limited mobility and the largest fraction of inactive sites, which suggests that the inactive catalytic sites are in the micropores. Overall, the design of highly active catalytic materials can be achieved using materials that have limited micropore volumes.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Construction of Fluorine- and Piperazine-Engineered Covalent Triazine Frameworks Towards Enhanced Dual-Ion Positive Electrode Performance
Organic positive electrodes featuring lightweight, and tunable energy storage modes by molecular structure engineering have promising application prospects in dual-ion batteries. Herein, a series of highly porous covalent triazine frameworks (CTFs) were synthesized under ionothermal conditions using fluorinated aromatic nitrile monomers containing a piperazine ring. Fluorinated monomers can result in more defects in CTFs, leading to a higher surface area up to 2515 m 2 /g and a higher N content of 11.34 wt% compared to the products from the non-fluorinated monomer. The high surface area and abundant redox sites of these CTFs afforded high specific capacities (up to 279 mAh/g at 0.1 A/g), excellent rate performance (89 mAh/g at 5 A/g), and durable cycling performance (92.3% retention rate after 500 cycles at 2.0 A g -1 ) as dual-ion positive electrodes
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Fully Conjugated Poly(phthalocyanine) Scaffolds Derived from a Mechanochemical Approach Towards Enhanced Energy Storage
Phthalocyanines (Pc)-derived materials represent an attractive category of porous organic scaffolds featured by extensive π-conjugated networks, but their construction is still limited to the solution-based pathways, producing materials with inferior conductivity and porosity. Herein, a mechanochemistry-driven approach was developed leveraging the on-surface polymerization of aromatic nitrile monomers with ortho-positioned dicyano groups in the presence of metal catalysts (magnesium, zinc, or aluminum) under neat and ambient conditions. Diverse Pc-functionalized conjugated porous networks (Pc-CPNs) were obtained featured by extensively and fully π-conjugated skeletons, high surface areas, and hierarchical porosities. The monomers in this mechanochemical approach could be extended to those difficult to be handled in solution-based procedures. In this work, the Pc-CPNs displayed attractive electrochemical performance as supercapacitor and anodes in batteries, together with superb long-term stability.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗