Engineering topics

Kodalle, Tim

Publications and source records attributed to Kodalle, Tim.

24 records · Page 2

DOE OSTI2023

19.31% binary organic solar cell and low non-radiative recombination enabled by non-monotonic intermediate state transition

Non-fullerene acceptors based organic solar cells represent the frontier of the field, owing to both the materials and morphology manipulation innovations. Non-radiative recombination loss suppression and performance boosting are in the center of organic solar cell research. Here, we developed a non-monotonic intermediate state manipulation strategy for state-of-the-art organic solar cells by employing 1,3,5-trichlorobenzene as crystallization regulator, which optimizes the film crystallization process, regulates the self-organization of bulk-heterojunction in a non-monotonic manner, i.e., first enhancing and then relaxing the molecular aggregation. As a result, the excessive aggregation of non-fullerene acceptors is avoided and we have achieved efficient organic solar cells with reduced non-radiative recombination loss. In PM6:BTP-eC9 organic solar cell, our strategy successfully offers a record binary organic solar cell efficiency of 19.31% (18.93% certified) with very low non-radiative recombination loss of 0.190 eV. And lower non-radiative recombination loss of 0.168 eV is further achieved in PM1:BTP-eC9 organic solar cell (19.10% efficiency), giving great promise to future organic solar cell research.

14 SOLAR ENERGY↗

DOE OSTI2023

Vapor-Deposited n = 2 Ruddlesden–Popper Interface Layers Aid Charge Carrier Extraction in Perovskite Solar Cells

Interfacial passivation with bulky organic cations such as phenetylammonium iodide has enabled high performance for metal halide perovskite optoelectronic devices. However, the homogeneity of these interfaces and their formation dynamics are poorly understood. Here we study how Ruddlesden-Popper 2D phases form at a 3D perovskite interface when the 2D precursors are introduced via solution or via vapor. When using vapor deposition, we observe uniform coverage of the capping layer and the formation of a predominantly n = 2 Ruddlesden-Popper phase. In contrast, when using solution deposition, we observe the presence of a mixture of n = 2 and n = 1 in the film and the formation of aggregates of the organic cations. As a result of the better phase purity and uniformity, vapor deposition enables higher median solar cell performance with narrower distribution compared to solution-treated films. This study provides fundamental information that the perovskite community can use to better design capping layers to achieve higher charge extraction efficiencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Shape-Controlled NaTaO 3 by Flux-Mediated Synthesis

NaTaO 3 is a stable and wide bandgap n-type semiconductor material with many different applications. Here, a flux-mediated synthesis method is presented for NaTaO 3 resulting in highly distinctive, substrate covering shapes via precursor chemistry variation at comparatively low temperatures. It is found that the microstructure of the resulting NaTaO 3 films can be varied from nanocubes to smooth thin films. These shapes and surface chemistries can be correlated by employing density functional theory calculations and surface sensitive X-ray photoemission spectroscopy. This study provides guidance on how to synthesize the material and tailor its shape and surface termination for different applications. Finally, as a proof of concept of one possible application, NaTaO 3 is applied to perovskite solar cells as the electron transport layer, resulting in conversion efficiencies of >19%. Further, this study provides a new strategy for designing ternary oxide thin films for renewable energy applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2022

Revealing the Transient Formation Dynamics and Optoelectronic Properties of 2D Ruddlesden–Popper Phases on 3D Perovskites

Using in situ photoluminescence measurements during the spin-coating and annealing steps, this study probes the formation of 2D layers on 3D triple cation perovskite films comparing phenylethylammonium and 2-thiophenemethylammonium iodide bulky cations. This study elucidates the formation mechanisms of the surface layers for both cases and reveals two regimes during 2D layer formation: a kinetic-driven and a thermodynamic-driven process. These driving forces result in different compositions of the 2D/3D interface for each treatment, namely, different ratios of pure 2D (n = 1) and quasi-2D (n > 1) structures. Further, this study shows that a higher ratio of quasi-2D phases is more beneficial for device performance, as pure-2D layers may hamper current extraction. Due to a more evenly distributed formation energy profile among 2D and quasi-2D phases, highly concentrated 2-thiophenemethylammonium iodide appears to be more suited for effective surface passivation than its phenylethylammonium analog.

36 MATERIALS SCIENCE↗

DOE OSTI2022

One‐Step Thermal Gradient‐ and Antisolvent‐Free Crystallization of All‐Inorganic Perovskites for Highly Efficient and Thermally Stable Solar Cells

Abstract All‐inorganic perovskites have emerged as promising photovoltaic materials due to their superior thermal stability compared to their heat‐sensitive hybrid organic–inorganic counterparts. In particular, CsPbI 2 Br shows the highest potential for developing thermally‐stable perovskite solar cells (PSCs) among all‐inorganic compositions. However, controlling the crystallinity and morphology of all‐inorganic compositions is a significant challenge. Here, a simple, thermal gradient‐ and antisolvent‐free method is reported to control the crystallization of CsPbI 2 Br films. Optical in situ characterization is used to investigate the dynamic film formation during spin‐coating and annealing to understand and optimize the evolving film properties. This leads to high‐quality perovskite films with micrometer‐scale grain sizes with a noteworthy performance of 17% (≈16% stabilized), fill factor (FF) of 80.5%, and open‐circuit voltage ( V OC ) of 1.27 V. Moreover, excellent phase and thermal stability are demonstrated even after extreme thermal stressing at 300 °C.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Strong Induced Circular Dichroism in a Hybrid Lead‐Halide Semiconductor Using Chiral Amino Acids for Crystallite Surface Functionalization

Abstract Chirality is a desired property in functional semiconductors for optoelectronic, catalytic, and spintronic applications. Here, introducing enantiomerically‐pure 3‐aminobutyric acid (3‐ABA) into thin films of the 1D semiconductor dimethylammonium lead iodide (DMAPbI 3 ) is found to result in strong circular dichroism (CD) in the optical absorption. X‐ray diffraction and grazing incidence small angle X‐ray scattering (GISAXS) are applied to gain molecular‐scale insights into the chirality transfer mechanism, which is attributed to a chiral surface modification of DMAPbI 3 crystallites. This study demonstrates that the CD signal strength can be controlled by the amino‐acid content relative to the crystallite surface area. The CD intensity is tuned by the composition of the precursor solution and the spin‐coating time, thereby achieving anisotropy factors ( g abs ) as high as 1.75 × 10 –2 . Grazing incidence wide angle scattering reveals strong preferential ordering that can be suppressed via tailored synthesis conditions. Different contributions to the chiroptical properties are resolved by a detailed analysis of the CD signal utilizing an approach based on the Mueller matrix model. This report of a novel class of chiral hybrid semiconductors with precise control over their optical activity presents a promising approach for the design of circularly polarized light detectors and emitters.

36 MATERIALS SCIENCE↗