Search NASA⌕ Search

Engineering topics

Koech, Phillip K

Publications and source records attributed to Koech, Phillip K.

At least 19 records

Capture and release of acid-gasses with acid-gas binding organic compounds

A system and method for acid-gas capture wherein organic acid-gas capture materials form hetero-atom analogs of alkyl-carbonate when contacted with an acid gas. These organic-acid gas capture materials include combinations of a weak acid and a base, or zwitterionic liquids. This invention allows for reversible acid-gas binding to these organic binding materials thus allowing for the capture and release of one or more acid gases. These acid-gas binding organic compounds can be regenerated to release the captured acid gasses and enable these organic acid-gas binding materials to be reused. This enables transport of the liquid capture compounds and the release of the acid gases from the organic liquid with significant energy savings compared to current aqueous systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

System and process for capture of H.sub.2S from gaseous process streams and process for regeneration of the capture agent

A system and process are disclosed for selective removal and recovery of H.sub.2S from a gaseous volume, e.g., from natural gas. Anhydrous organic, sorbents chemically capture H.sub.2S gas to form hydrosulfide salts. Regeneration of the capture solvent involves addition of an anti-solvent that releases the captured H.sub.2S gas from the capture sorbent. The capture sorbent and anti-solvent are reactivated for reuse, e.g., by simple distillation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of p-type conductivity dopant 2-(3-(adamantan-1-yl)propyl)-3,5,6-trifluoro-7,7,8,8-tetracyanoquinodimethane

We report the synthesis and characterization of 2-(3-(adamantan-1-yl)propyl)-3,5,6-trifluoro-7,7,8,8-tetracyanoquinodimethane (F3TCNQ-Ad1), a substituted analog of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ), designed for p-type conductivity doping. The dopant is designed as a model for substituted alternatives to F4TCNQ that maintain similar electronic properties with the goal of engineering dopants with superior fabrication characteristics over F4TCNQ. We describe the design strategy for F3TCNQ-Ad1 based on molecular modeling predictions that substitution of a single fluorine atom of F4TCNQ has little effect on the electronic properties of the molecule. Photophysical and electrochemical characterization reveal that the adamantyl substituent in F3TCNQ-Ad1 does not significantly alter the electronic properties of the substituted dopant relative to F4TCNQ. Unfortunately, F3TCNQ-Ad1 degrades under standard sublimation conditions, preventing sublimation deposition processing. Instead, hole-only devices were made via solution-processing of the p-doped films with the structure glass/ITO/2.3 x103Å PVK:(MTDATA:dopant)/2.0x102Å Au/1.0x103Å Al, where dopant is either F4TCNQ or F3TCNQ-Ad1. We demonstrate that F3TCNQ-Ad1 increased the conductivity of the films by at least 1,000 times compared to an undoped device.

Rainbolt, James E↗

Suite of Activity-Based Probes for Cellulose-Degrading Enzymes

Microbial glycoside hydrolases play a dominant role in the biochemical conversion of cellulosic biomass to high-value biofuels. Anaerobic cellulolytic bacteria are capable of producing multicomplex catalytic subunits containing cell-adherent cellulases, hemicellulases, xylanases, and other glycoside hydrolases to facilitate the degradation of highly recalcitrant cellulose and other related plant cell wall polysaccharides. Clostridium thermocellum is a cellulosome producing bacterium that couples rapid reproduction rates to highly efficient degradation of crystalline cellulose. Herein, we have developed and applied a suite of difluoromethylphenyl aglycone, N-halogenated glycosylamine, and 2-deoxy-2-fluoroglycoside activity-based protein profiling (ABPP) probes to the direct labeling of the C. thermocellum cellulosomal secretome. These activity-based probes (ABPs) were synthesized with alkynes to harness the utility and multimodal possibilities of click chemistry, and to increase enzyme active site inclusion for LC-MS analysis. We directly analyzed ABP-labeled and unlabeled global MS data, revealing ABP selectivity for glycoside hydrolase (GH) enzymes in addition to a large collection of integral cellulosome-containing proteins. By identifying reactivity and selectivity profiles for each ABP, we demonstrate our ability to widely profile the functional cellulose degrading machinery of the bacterium. Derivatization of the ABPs, including reactive groups, acetylation of the glycoside binding groups, and mono- and disaccharide binding groups, resulted in considerable variability in protein labeling. Our probe suite is applicable to aerobic and anaerobic cellulose degrading systems, and facilitates a greater understanding of the organismal role associated within biofuel development.

Chauvigne-Hines, Lacie M↗

Factors Affecting the Battery Performance of Anthraquinone-based Organic Cathode Materials

Two organic cathode materials based on poly(anthraquinonyl sulfide) structure with different substitution positions were synthesized and their electrochemical behavior and battery performances were investigated. The substitution positions on the anthraquinone structure, binders for electrode preparation and electrolyte formulations have been found to have significant effects on the battery performances of such organic cathode materials. The substitution position with less steric stress has higher capacity, longer cycle life and better high-rate capability. Polyvinylidene fluoride binder and ether-based electrolytes are favorable for the high capacity and long cycle life of the quinonyl organic cathodes.

36 MATERIALS SCIENCE↗

Electrochemically Induced High Capacity Displacement Reaction of PEO/MoS2/Graphene Nanocomposites with Lithium

MoS2/PEO/graphene composite is successfully prepared and the discharge mechanism of MoS2 as an anode material for Li-ion batteries has been investigated systematically in this work. The simultaneous formation of Li2S and Mo at deep discharge depth has been shown for the first time. The deposition of Mo metal with Li residing on the defects after the first discharge increases the intrinsic electronic conductivity of the electrode leading to a superior cycling stability for over 185 cycles. After the first discharge the amorphous Mo matrix allows a large amount of Li+ ions to repeatedly deposit and being oxidized during cycling while the transition between Li2S and S contribute to the capacity above 2.0 V. The interactions between as-formed Mo and S prevents the dissolution of the intermediate polysulfide thus providing clues to immobilize the soluble species in a Li-S battery. Excellent rate performances are achieved in this MoS2/PEO/graphene composite indicating a fast diffusion path of Li+ ions existing not only in the bulk material but also in the interface between the electrode and the electrolyte.

36 MATERIALS SCIENCE↗

CO 2 -binding Organic Liquids, an Integrated Acid Gas Capture System

Amine systems are effective for CO 2 capture, but they are still inefficient because the solvent regeneration energy is largely defined by the amount of water in the process. Most amines form heat-stable salts with SO 2 and COS resulting in parasitic solvent loss and degradation. Stripping the CO 2 -rich solvent is energy intensive it requires temperatures above 100 °C due to the high specific heat and heat of vaporization of water. CO 2 -capture processes could be much more energy efficient in a water free amine process. In addition, if the capture-material is chemically compatible with other acid gases, less solvent would be lost to heat-stable salts and the process economics would be further improved. One such system that can address these concerns is Binding Organic Liquids (BOLs), a class of switchable ionic liquids.

54 ENVIRONMENTAL SCIENCES↗

Synthesis, characterization and application of alkanolamidines and alkanolguanidines in CO(2) capture

Global carbon dioxide (CO2) emission to the atmosphere is partly responsible for climate change. In order to mitigate these environmental effects CO2 capture and storage is required. Solvents currently used for this application are the energy intensive aqueous amines. Here we present the synthesis, characterization and CO2 uptake of new advanced solvents called alkanolamidines and alkanolguanidines otherwise known as CO2-binding organic Liquids (CO2BOLs). These solvents have been designed to have decreased vapor pressure and low viscosity in order to increase the CO2 uptake capacity while minimizing evaporative losses. Alkanolamidines were synthesized in 1-3 steps from commercially available materials. These compounds bind CO2 chemically via the alcohol moiety forming zwitterionic alkylcarbonates. The alkanolamidines can be regenerated thermally by heating the alkylcarbonate to 75 °C. CO2 binding capacities up to 10 wt% were achieved using these compounds. These compounds have the potential to be energy efficient CO2 capture solvents.

54 ENVIRONMENTAL SCIENCES↗

Performance of Single-Component CO2-Binding Organic Liquids (CO2BOLs) For Post Combustion CO2 Capture

We report the performance of multiple CO2 binding organic liquids (CO2BOLs) as solvent systems for post combustion gas capture. Alkanolguanidines and alkanolamidines are single component CO2BOLs that reversibly bind CO2 chemically as liquid zwitterionic amidinium / guanidinium alkylcarbonates. Select alkanolguanidines/alkanolamidines and guanidine/alcohol mixtures were tested for CO2 capacity and solvent lifetime. Solvent performance of these three CO2BOLs was assessed by batchwise CO2 uptake and release over multiple cycles. We report each CO2BOL’s activity and solvent durability with and without water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Blue phosphorescent organic light-emitting devices utilizing cesium–carbonate-doped 2,4,6-tris(2',4'-difluoro-[1,1'- biphenyl]-4-yl)-1,3,5-triazine

We report an alternative, high yielding synthesis for the known compound 2,4,6-tris(2',4'-difluoro-[1,1'-biphenyl]-4-yl)-1,3,5-triazine, (tris-(dFB)Tz). The lowest occupied molecular orbital energy for tris-(dFB)Tz is calculated to be -3.5 eV via electrochemical characterization. The deep ELUMO of tris-(dFB)Tz affords a material with excellent electron acceptor characteristics for use in n-doped electron transport layers. Tris-(dFB)Tz shows a four order of magnitude increase in the number of carriers upon doping with 8 wt.% Cs2CO3. Enhanced electron injection was also observed upon doping with Cs2CO3, eliminating the need for a LiF injection layer. Blue phosphorescent OLEDs were fabricated using n-doped tris-(dFB)Tz electron transport layers. OLEDs with thick (700Å) Cs2CO3 doped tris-(dFB)Tz electron transport layers had lower operating voltage than OLEDS with an undoped electron transport layer of bis(diphenylphosphoryl)dibenzothiophene (PO15), which has previously been used in low voltage, high efficiency OLEDs. The tris-(dFB)Tz results indicate that aromatic substituted triazines may be promising materials for use as electron acceptors in n-doped organic electronic systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Controlling charge transport in blue organic light-emitting devices by chemical functionalization of host materials

Generation of white light from OLEDs for general lighting applications requires a highly efficient blue component. However, a stable and power efficient blue OLED component with simple device architecture remains a significant challenge partly due to lack of appropriate host materials. Here we report the photophysical and device properties of ambipolar host phosphine oxide based materials. In this work, we studied the effect of the structural modification made to phosphine oxide-based hosts on the charge balance. We observed significant changes in charge transport within the host occurred upon small modifications to their chemical structure. As a result, an alteration of the chemical design of these materials allows for the control of charge balance of the OLED.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Acid Gas Capture Using CO2-Binding Organic Liquids

Current chemical CO2 scrubbing technology is primarily aqueous alkanolamine based. These systems rapidly bind CO2 (forming water-soluble carbamate and bicarbonate salts) however, the process has serious disadvantages. The concentration of monoethanolamine rarely exceeds 30 wt % due to the corrosive nature of the solution, and this reduces the maximum CO2 volumetric (≤108 g/L) and gravimetric capacity (≤7 wt%) of the CO2 scrubber. The ≤30 wt % loading of ethanolamine also means that a large excess of water must be pumped and heated during CO2 capture and release, and this greatly increases the energy requirements especially considering the high specific heat of water (4 j/g-1K-1). Our approach is to switch to organic systems that chemically bind CO2 as liquid alkylcarbonate salts. Our CO2-binding organic liquids have higher CO2 solubility, lower specific heats, potential for less corrosion and lower binding energies for CO2 than aqueous systems. CO2BOLs also reversibly bind and release mixed sulfur oxides. Furthermore the CO2BOL system can be direct solvent replacements for any solvent based CO2 capture systems because they are commercially available reagents and because they are fluids they would not require extensive process re-engineering.

54 ENVIRONMENTAL SCIENCES↗

Synthesis and application of pyridine-based ambipolar hosts: control of charge balance in organic light emitting devices (OLEDs) by chemical structure modification

Pyridine-based host materials were synthesized via Grignard metathesis of bromopyridines to provide the required organometallic reagent. The isomeric hosts (4-(9H-carbazol-9-yl)phenyl)(phenyl)(pyridin-3-yl)phosphine oxide (HM-A4), (5-(9H-carbazol-9-yl)pyridin-2-yl)diphenylphosphine oxide (HM-A5), and (5-(diphenylamino)pyridin-2-yl)diphenylphosphine oxide (HM-A6), (4-(diphenylamino)phenyl)(phenyl)(pyridin-3-yl)phosphine oxide (HM-A8) have similar frontier orbital energies. Organic light emitting devices (OLEDs) fabricated using the series of the host materials demonstrate that small structural modification of the host results in significant change in charge transporting ability.

36 MATERIALS SCIENCE↗

Phosphine Oxide Based Electron Transporting and Hole Blocking Materials for Blue Electrophosphorescent Organic Light Emitting Devices

We report the design, synthesis, thermal, and photophysical properties of two phosphine oxide based electron transport/hole blocking materials, 2,6-bis(4-(diphenylphosphoryl)phenyl)pyridine (BM-A11) and 2,4-bis(4-(diphenyl-phosphoryl)phenyl)pyridine (BM-A10) for blue electrophosphorescent organic light emitting devices (OLEDs). The use of these materials in blue OLED with iridium (III) bis[(4,6-difluorophenyl)-pyridinato-N,C2’]picolinate (Firpic) as the phosphor was demonstrated. Using the dual host device architecture with BM-A10 as the ETM yields a maximum EQE of 8.9% with a power efficiency of 21.5 lm/W (4.0V and 35 cd/m2). When BM-A11 is used as the ETM, the maximum EQE and power efficiency improves to 14.9% and 48.4 lm/W, respectively (3.0V and 40 cd/m2).

36 MATERIALS SCIENCE↗

Reversible Acid Gas Capture Using CO2-Binding Organic Liquids

Acid gas scrubbing technology is predominantly aqueous alkanolamine based. Of the acid gases, CO2, H2S and SO2 have been shown to be reversible, however there are serious disadvantages with corrosion and high regeneration costs. The primary scrubbing system composed of monoethanolamine is limited to 30% by weight because of the highly corrosive solution. This gravimetric limitation limits the CO2 volumetric (≤108 g/L) and gravimetric capacity (≤7 wt%) of the system. Furthermore the scrubbing system has a large energy penalty from pumping and heating the excess water required to dissolve the MEA bicarbonate salt. Considering the high specific heat of water (4 j/g-1K-1), low capacities and the high corrosion we set out to design a fully organic solvent that can chemically bind all acid gases i.e. CO2 as reversible alkylcarbonate ionic liquids or analogues thereof. Having a liquid acid gas carrier improves process economics because there is no need for excess solvent to pump and to heat. We have demonstrated illustrated in Figure 1, that CO2-binding organic liquids (CO2BOLs) have a high CO2 solubility paired with a much lower specific heat (<1.5 J/g-1K-1) than aqueous systems. CO2BOLs are a subsection of a larger class of materials known as Binding Organic Liquids (BOLs). Our BOLs have been shown to reversibly bind and release COS, CS2, and SO2, which we denote COSBOLS, CS2BOLs and SO2BOLs. Our BOLs are highly tunable and can be designed for post or pre-combustion gas capture. The design and testing of the next generation zwitterionic CO2BOLs and SO2BOLs are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exfoliated MoS2 Nanocomposite as an Anode Material for Lithium Ion Batteries

Nanocomposites of molybdenum disulfide (MoS2) and poly(ethylene oxide) (PEO) were prepared by the exfoliation/absorption method that involved the hydrolysis of lithiated MoS2 in an aqueous solution of PEO. The absorption and subsequent interaction of PEO on the colloidal MoS2 formed a nanocomposite which restacked into layered secondary particles. X-ray diffraction and high resolution TEM indicated that highly disordered nanocomposites were produced when the Lix(PEO)yMoS2 stoichiometry was limited to y < 1. An improvement of greater than 5x in capacity accompanied by high cycle stability and efficiency was observed for the disordered nanocomposites providing a novel approach to utilize low-cost MoS2 and similar materials for a high capacity energy storage system.

25 ENERGY STORAGE↗

Synthesis, characterization and performance of single-component CO2-binding organic liquids (CO2BOL) for post combustion CO2 capture

Carbon dioxide (CO2) emission to the atmosphere will increase significantly with the shift to coal powered plants for energy generation. This increase in CO2 emission will contribute to climate change. There is need to capture and sequester large amounts of CO2 emitted from these coal power plants in order to mitigate the environmental effects. Here we report the synthesis, characterization and system performance of multiple third generation CO2 binding organic liquids (CO2BOLs) as a solvent system for post combustion gas capture. Alkanolguanidines and alkanolamidines are single component CO2BOLs that reversibly bind CO2 chemically as liquid zwitterionic amidinium / guanidinium alkylcarbonates. Three different alkanolguanidines and alkanolamidines were synthesized and studied for CO2 capacity and binding energetics. Solvent performance of these three CO2BOLs was evaluated by batch-wise CO2 uptake and release over multiple cycles. Synthesis of CO2BOLs, characterization, CO2 uptake, selectivity towards CO2 as well as solvent tolerance to water will be discussed.

01 COAL, LIGNITE, AND PEAT↗