Search NASA⌕ Search

Engineering topics

Kohlstedt, D. L.

Publications and source records attributed to Kohlstedt, D. L..

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

The Effect of Large Melt Fraction on the Deformation Behavior of Peridotite: Implications for the Rheology of Io' Mantle

One key constraint needed for refinement of the interior geochemical and geodynamic models of Io is the viscosity of the convecting partially- molten silicate mantle. To date, laboratory studies of partially molten mantle rocks have reached melt fractions up to approx.0.12, a value much smaller than thought to be appropriate for the asthenosphere of Io where the degree of partial melting may be 0.15 0.40 or higher. Therefore, we have performed a series of high temperature, triaxial compressive creep experiments on dry synthetic peridotites in a gas medium apparatus at a confining pressure of 300 MPa and temperatures from 1473 to 1573 K in order to understand the influence of large amounts of melt (0.15 < phi < 0.40) on the rheological behavior of partially molten rocks.

Scott, T.↗
NASA NTRS2004

Metal-Silicate Segregation in Deforming Dunitic Rocks: Applications to Core Formation in Europa and Ganymede

Core formation is an important event in the evolution of a planetary body, affecting both the geochemical and geophysical properties of the body. Metal-silicate segregation could have proceeded either by settling of liquid metal through a magma ocean or by percolation of liquid metal through a solid silicate mantle. Percolation of metallic melt had previously been excluded as a viable segregation mechanism because metallic melts do not form an interconnected network under hydrostatic conditions, except at high melt fraction (>5 vol%), due to the high dihedral angle between metals and silicates (>60 ). Without an interconnected network, porous flow of metallic melt is impossible, leaving the magma ocean scenario as the only mechanism to form the core. Moment-of-inertia measurements of Europa and Ganymede from the Galileo probe indicate that they are differentiated. This evidence suggests that a method for segregating metals and silicates at temperatures low enough to retain volatile compounds must exist. We have investigated the effect of deformation on the distribution of metallic melts in silicates. We have deformed samples of olivine + 5-9 vol% Fe-S to strains of 2.5 in simple shear and find that the metallic melt segregates into melt-rich planes oriented at 20 to the shear plane. These metallic melt-rich bands are similar in structure to the silicate melt-rich bands reported by Holtzman, indicating that deformation can interconnect isolated metallic melt pockets and allow porous flow of non-wetting melts. Such a core formation process could have occurred in the jovian satellites.

Hustoft, J. W.↗
NASA NTRS2003

Melt Redistribution in Dynamic Systems: Applications to Core Formation

Samples of olivine + Fe-S were fabricated by hot-pressing a mechanical mixture of the two phases. Olivine powders with a starting grain size of approx. 10 microns were prepared by crushing crystals of San Carlos olivine followed by pulverization in a fluid energy mill. Iron sulfide powder with a particle size of approx. 5 microns was prepared from a 2:1 mixture of reagent grade iron sulfide (FeS) plus iron. Rods 20 mm in length by 10 mm in diameter were cold-pressed into iron capsules with a uniaxial stress of approx. 200 MPa. These rods were then hot-pressed at 1523 K and 300 MPa for 4 h to obtain a starting material with <2% porosity. Samples for shear experiments were cut perpendicular to the long axis of these rods. The discs were shaped into ellipses approx. 6 mm by approx. 8 mm with a thickness ranging from 0.6 to 1.0 mm. An iron foil strain marker was inserted into a cut made along the minor axis. The sample was placed between two thoriated tungsten pistons cut at 45 deg to the long axis and then placed into an iron sleeve capped by alumina discs. The sample was then sheared in a gas pressure-medium apparatus at a temperature of 1523 K and a confining pressure of 300 MPa.

Hustoft, J. W.↗
NASA NTRS2001

Superplastic Deformation of ice: Experimental Observations

Creep experiments on fine-grained ice reveal the existence of three creep regimes: (1) a dislocation creep regime; (2) a superplastic flow regime in which grain boundary sliding is an important deformation process; and (3) a basal slip creep regime in which the strain rate is limited by basal slip. Dislocation creep in ice is likely climb-limited, is characterized by a stress exponent of 4.0, and is independent of grain size. Superplastic flow is characterized by a stress exponent of 1.8 and depends inversely on grain size to the 1.4 power. Basal slip limited creep is characterized by a stress exponent of 2.4 and is independent of grain size. A fourth creep mechanism, diffusional flow, which usually occurs at very low stresses, is inaccessible at practical laboratory strain rates even for our finest grain sizes of approximately 3 micrometers. A constitutive equation based on these experimental results that includes flow laws for these four creep mechanisms is described. This equation is in excellent agreement with published laboratory creep data for coarse-grained samples at high temperatures. Superplastic flow of ice is the rate-limiting creep mechanism over a wide range of temperatures and grain sizes at stresses less than or equal to 0.1 MPa, conditions which overlap those occurring in glaciers, ice sheets, and icy planetary interiors.

Goldsby, D. L.↗
NASA NTRS2000

An Interconnected Network of Core-Forming Melts Produced by Shear Deformation

The formation mechanism of terrestrial planetary is still poorly understood, and has been the subject of numerous experimental studies. Several mechanisms have been proposed by which metal-mainly iron with some nickel-could have been extracted from a silicate mantle to form the core. Most recent models involve gravitational sinking of molten metal or metal sulphide through a partially or fully molten mantle that is often referred to as a'magma ocean. Alternative models invoke percolation of molten metal along an interconnected network (that is, porous flow) through a solid silicate matrix. But experimental studies performed at high pressures have shown that, under hydrostatic conditions, these melts do not form an interconnected network, leading to the widespread assumption that formation of metallic cores requires a magma ocean. In contrast, here we present experiments which demonstrate that shear deformation to large strains can interconnect a significant fraction of initially isolated pockets of metal and metal sulphide melts in a solid matrix of polycrystalline olivine. Therefore, in a dynamic (nonhydrostatic) environment, percolation remains a viable mechanism for the segregation and migration of core-forming melts in a solid silicate mantle.

Bruhn, D.↗
NASA NTRS1998

High-Temperature Deformation of Dry Diabase with Application to Tectonics on Venus

We have performed an experimental study to quantify the high-temperature creep behavior of natural diabase rocks under dry deformation conditions. Samples of both Maryland diabase and Columbia diabase were investigated to measure the effects of temperature, oxygen fugacity, and plagioclase-to-pyroxene ratio on creep strength. Flow laws determined for creep of these diabases were characterized by an activation energy of Q = 485 +/- 30 kJ/mol and a stress exponent of n = 4.7 +/- 0.6, indicative of deformation dominated by dislocation creep processes. Although n and Q are the same for the two rocks within experimental error, the Maryland diabase, which has the lower plagioclase content, is significantly stronger than the Columbia diabase. Thus the modal abundance of the various minerals plays an important role in defining rock strength. Within the s ample-to-sample variation, no clear influence of oxygen fugacity on creep strength could be discerned for either rock. The dry creep strengths of both rocks are significantly greater than values previously measured on diabase under "as-received" or wet conditions. Application of these results to the present conditions in the lithosphere on Venus predicts a high viscosity crust with strong dynamic coupling between mantle convection and crustal deformation, consistent with measurements of topography and gravity for that planet.

Mackwell, S. J.↗
NASA NTRS1993

Rheology of water and ammonia-water ices

Creep experiments on fine-grained water and ammonia-water ices have been performed at one atmosphere and high confining pressure in order to develop constitutive relationships necessary to model tectonic processes and interpret surface features of icy moons of the outer solar system. The present series of experiments explores the effects of temperature, strain rate, grain size, and melt fraction on creep strength. In general, creep strength decreases with increasing temperature, decreasing strain rate, and increasing melt fraction. A transition from dislocation creep to diffusion creep occurs at finer grain sizes, higher temperatures, and lower strain rates.

Goldsby, D. L.↗
NASA NTRS1990

Melt migration in a silicate liquid-olivine system - An experimental test of compaction theory

An experimentally derived melt migration profile is compared with those obtained from compaction theory. A couple is prepared in which a source-for-melt (a disk composed of a silicate glass and olivine) was placed in contact with a sink-for-melt (a disk of polycrystalline olivine) in order to induce melt migration under laboratory conditions. It is noted that melt infiltrates into the sink disk along triple junctions driven by capillary forces. In order to analyze the melt migration profile in terms of compaction theory, the equations developed by McKenzie (1984) to describe porous flow of a liquid in a deformable matrix were modified. The bouyancy force term is replaced with a capillary force term and governing equations are then solved numerically with the initial boundary conditions specified by the experimental design. Also, it is determined that compaction theory provides a good description of the experimental results provided that the permeability of these solid-liquid materials increases linearly with increasing liquid fraction.

Riley, G. N., Jr.↗