Coupled Neutron Diffraction and Modeling Study of the Formation and Recovery of Dislocations in Elemental Tantalum and Ferritic HT-9 Steel
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Kohnert, Aaron Anthony.
Explore the source record for details and available documents.
Surface self-diffusion studies on metals under elevated reaction conditions are limited, as it is inherently challenging to unambiguously follow atomic transport across highly-reactive surfaces. Here, quantitative and mechanistic insight into thermally induced atomic transport processes in bcc α-iron at the sub-nanometer level was achieved using isotopic tracer techniques coupled with in situ atom probe tomography (APT) capabilities. Specifically, using a reactor directly connected to the APT, needle-shaped specimens fabricated from epitaxial thin films with an embedded 57 Fe tracer layer were annealed in Ar at 500 °C and 350 °C for 1 hour. Furthermore, the tracer was positioned at various depths in the APT specimen by field evaporation, enabling targeted and simultaneous analysis of lattice and surface diffusion. 57 Fe concentration profiles reveal lattice self-diffusion occurs at 500 °C on the order of ~7 – 9 monolayers, while lattice diffusion is not resolvable at 350 °C. Considerable surface transport was, however, observed at both conditions, where atomic transport over the specimen surface led to the formation of a thin (≤1 nm), isotopically-intermixed layer at the surface. Further, the observed isotopic redistributions at 500 °C were convoluted by additional processes occurring in the subsurface, such as atomic intermixing in correlation with lattice diffusion. However, surface diffusion was determined to be the primary transport process at 350 °C and was thereby quantified. Ultimately, these results demonstrate the significance of surface self-diffusion as a short circuit pathway. More broadly, this approach has the potential to provide detailed insight into (self-)diffusion mechanisms across various materials while targeting site-specific reactions under elevated reaction conditions.
Unraveling the effects of continuous dislocation interactions with interfaces, particularly at the nanometer length scales, is key to a broader understanding of plasticity, to material design and to material certification. To this end, this work proposes a novel discrete dislocation dynamics-based model for dislocation interface interactions tracking the fate of residual dislocation on interfaces. This new approach is used to predict the impact of dislocation/interface reactions on the overall mechanical behavior of accumulative roll bonded nanometallic laminates. The framework considers the dynamic evolution of the interface concurrent with a large network of dislocations, thus, accounting for the local short and long range effects of the dislocations under the external boundary conditions. Specifically, this study focuses on two-phase Fe/Cu nanometallic laminates, and investigates the role of the underlying elastic and plastic contrast of the Fe and the Cu layers on the composite response of the material. Moreover, the role of initial microstructures, resulting from processing is also investigated. Subsequently, the model is used to examine the effect of layer thickness and interface orientation relationship on the residual stresses of the relaxed microstructure. The associated mechanical response of these laminates are compared when loaded under normal direction compression, as well as shear compression. Finally, this work predicts a dominant effect of the layer thickness, as compared to the interface orientation relationship, on the macroscopic response and on the residual stresses of these nanolaminates, while the local dislocation transmission propensity through the interface is significantly influenced by the corresponding orientation relationship.
This report summarizes the advances made by LANL in the XMAT-H2 program over FY23. In summary LANL was tasked with leading efforts related to (1) the development of models predicting hydrogen (H) redistribution within polycrystals (H redistribution model), (2) the development of models for the mechanical performance of metals/steels under H environments (Model for H effects on plasticity), The development of a framework to quantify the uncertainty in model parameters (Uncertainty in model parameters), (3) small scale characterization of the mechanical response of 347H (Microstructure characterization).
Vacancies are missing atoms in a crystalline material, and occur both at equilibrium (varying with temperature) and out of equilibrium such as when crystalline materials are damaged with radiation or corrosion. While we know of their importance, particularly regarding diffusive mechanisms, it is not straightforward to experimentally measure their concentration or to visualize them directly. Traditionally, measurements such as positron annihilation spectroscopy and to some degree X-ray diffraction can measure average concentrations, but generally lack the ability to visualize or quantify a heterogenous concentration of vacancies that can occur at the level of individual defects and microstructural features. Here, we present a method to map vacancy concentrations and their distribution using local lattice parameter measurements with a high-resolution electron microscope. Our method utilizes a Au thin film as a model to demonstrate the method via four-dimensional scanning transmission electron microscopy (4D-STEM) by correlating the differences between changes in lattice parameter and the volumetric thermal expansion during in situ heating experiments. The vacancy mapping methodology is also applied to non-equilibrium defects accumulated in pure Al via knock-on electron beam irradiation. Our method demonstrates the ability to map point defect concentrations in heterogeneous systems in situ with nanometer spatial resolution. The result is a technique that can provide direct measurements of vacancy concentrations at the level of individual defects in studies of materials in and out of equilibrium.
Despite the fundamental importance of mass transport, there is still a lack of knowledge regarding the mechanisms in many materials. In particular, how the magnetic spin structure interacts with migrating defects is unclear. In this work, using density functional theory to examine cation interstitial transport in antiferromagnetic corundum-structured oxides, we reveal an interplay between the migration of the interstitial and the magnetic structure of the oxide. The magnetic spin configuration impacts the migration energy of the migrating defect but, critically, the defect modifies the spin configuration. Thus, the two aspects change in concert to modify one another. This has profound implications for mass transport in magnetic materials.
Self-diffusion is a fundamental physical process that, in solid materials, is intimately correlated with both microstructure and functional properties. In this work, a universal approach is presented to precisely characterize self-diffusion in ionic solids by isotopically enriching anions and/or cations at specific locations within an epitaxial film stack, and characterize their redistribution at high spatial resolution with atom probe tomography. Nanoscale anion diffusivity is quantified in epitaxial α-Fe 2 O 3 thin films deposited by molecular beam epitaxy with a thin (10 nm) buried layer highly enriched in 18 O. The isotopic sensitivity of the atom probe allows precise measurement of 18 O distribution across the sharp interfaces between this layer and the surrounding Fe 2 O 3 after annealing. Short-circuit anion diffusion through 1D and 2D structural defects in Fe 2 O 3 are also directly visualized in 3D. This versatile approach to study precisely tailored thin film samples at high spatial and mass fidelity will facilitate a deeper understanding of atomic-scale diffusion phenomena.
In this work, the creep behavior of HT9 steel in both thermal and irradiation environments is predicted using an integrated modeling framework. Multiple physical mechanisms such as diffusional creep and dislocation climb are incorporated into crystal plasticity calculations using the Visco-Plastic Self-Consistent (VPSC) approach. Climb velocities are informed by mean field rate theory laws in place of empirical power law formulations. More interestingly, the climb velocities explicitly consider the contribution of irradiation-induced point defects, i.e., stress induced preferential absorption (SIPA) effect. The developed expressions are shown to apply under conventional thermal creep and to the more complex irradiation conditions as well. This physically-informed, mechanism-based model is used to simulate the creep strain evolution of HT9 pressurized tubes under various loading conditions. Furthermore, it is demonstrated that the experimental behavior of this material reported in the literature is well described by this theoretical framework. The role of each relevant mechanism is discussed.
Irradiation induces significant changes in the microstructure of structural materials, many of which are driven by the preferential capture of point defects at particular sinks, such as dislocations. To quantify the kinetics of defect absorption at sinks, theoretical models of radiation damage generally rely on the concept of sink strength. However, analytical approaches to estimating the sink strength of dislocations rely, in turn, on a series of geometrical assumptions, idealizing the dislocation network as a series of infinite straight dislocations or isolated loops, often with artificial boundary conditions. In this paper, we use a recently developed technique to quantify point defect capture in three-dimensional dislocation networks. We integrate this technique with discrete dislocation dynamics to analyze the sink strengths of realistic dislocation microstructures consisting of a mixture of edge, screw, and junction segments, complete with an accurate description of the strain fields these microstructures produce and the resultant energetic interactions experienced by point defects. Furthermore, we show that the effective kinetics for absorbing point defects can vary significantly with the arrangement of the microstructure with a strong dependence on the structure and character of its dislocation content and introduce a surrogate model for sink strength which incorporates these effects.
This report documents the development status of a cluster dynamics model to predict microstructural evolution in high-energy particle irradiated ferritic martensitic steels, in which we have recently implemented a model for the biased absorption of self-interstitial defects at small, nanometer-sized cavities that can provide an intrinsic nucleation barrier for the onset of void swelling. Following a brief review of the cluster dynamics modeling approach, this report describes the atomistic modeling results that demonstrate this phenomenon, along with an investigation on the influence of helium content on modifying the intrinsic cavity bias. Subsequently, the report describes the initial results obtained from our cluster dynamics modeling of the incorporation of this cavity bias on the predicted swelling incubation dose as a function of irradiation temperature. Finally, the report concludes with a discussion of the remaining modeling research required to fully validate the model for application to high dose neutron or ion beam irradiation exposure conditions.
We report that microstructure evolution under creep loading and/or irradiation is largely affected by the two-way coupling between dislocation induced plasticity and point defect diffusion as mediated by the internal elastic strain field within the medium. The magnitude of this effect has been quantified only in idealized, simplified environments such that estimates of absorption rates of point defects to dislocations ignore the collective effects on capture rates arising from particular distribution of dislocations in a given network, the interaction of point defects with the internal strain, or in many cases both. To quantify these effects, we advance a novel methodology to determine point defect capture rates locally within a spatially resolved finite difference solution to the diffusion problem for arbitrarily directed dislocations and the corresponding strain fields. In addition to examining the effects of these couplings on local and effective absorption rates of dislocation networks, the potential consequences of these interactions on other microstructure evolution phenomena are examined using void swelling under irradiation as an example. Our study indicates that local rates of defect mediated microstructural changes such as cavity growth can vary strongly as a consequence of the arrangement of the dislocation network and the corresponding strain state. Lastly, the heterogeneous aspects of the resultant defect populations are shown to provide mechanisms for microstructural evolution under irradiation that are not available in the conventional homogeneous theory.
As both the design of material systems for nuclear energy applications and the number of reactor designs being proposed increase the need for material models predicting the evolution of microstructures as a function of chemistry, texture, grain size, precipitate content, etc., and irradiation conditions is steadily increasing. Here, this manuscript aims at presenting a review of the different cluster dynamics modeling schemes that have emerged worldwide over the past decade(s). Additionally, the manuscript also critically discusses limitations in existing approaches and identifies potential routes for future developments.