Facilitated Phase Transformation for Improved Performance of Earth‐Abundant Disordered Rocksalt Materials
Explore the source record for details and available documents.
36 MATERIALS SCIENCE↗
Engineering topics
Koirala, Krishna Prasad
Publications and source records attributed to Koirala, Krishna Prasad.
Alternative Solid‐State Synthesis Route for Highly Fluorinated Disordered Rock‐Salt Cathode Materials for High‐Energy Lithium‐Ion Batteries
Abstract Fluorination has been identified as a key element for enabling the stable cycling of earth‐abundant manganese‐based disordered rock salt (DRX) cathodes. However, fluorination in the DRX bulk remains a challenge for scalable solid‐state synthesis. In this study, a tailored reaction pathway is proposed to synthesize a highly fluorinated DRX. It is demonstrated for the first time that the unconventional precursors, Li 6 MnO 4 , MnF 2 , and TiO 2 , can avoid the formation of Mn‐based intermediates (such as Li 2 (Mn,Ti)O 3, LiMnO 2 , and Mn 3 O 4 ), which, once formed, persist until the synthesis temperature reaches close to or above that required for fluorine volatility. Therefore, this method can form a highly fluorinated DRX with a composition of Li 1.23 Mn 0.40 Ti 0.37 O 2−y F y ( y = 0.29–0.34) at a low temperature (800 °C) relative to that required for conventional DRX solid‐state reactions (≥900 °C). Li 1.23 Mn 0.40 Ti 0.37 O 2−y F y ( y = 0.29–0.34) delivers a specific capacity above 300 mAh g −1 and a specific energy of 980 Wh kg −1 at 30 °C. Detailed characterization reveals that this DRX phase reversibly utilizes Mn 2+/3+ redox in the low‐voltage region and Mn 3+/4+ redox in the middle‐voltage range, whereas reversible oxygen redox is observed at high potentials.
Avvaru, Venkata Sai↗
Quantification of Oxygen Vacancies in SrFe0.5Cr0.5O3−δ Thin Films: Correlating Lattice Expansion with Oxidation State Variability
Oxygen vacancies (VO), even in the dilute regime, can significantly impact the physical and chemical properties of complex oxides. It is however challenging to reliably detect and adequately quantify such defects in thin film samples where the VO concentration and distribution may further vary in response to interfacial strain. Here, we present a method to quantify VO concentrations in SrFe0.5Cr0.5O3−δ (SFCO) epitaxial thin films. Through coherent Bragg rod analysis, X-ray absorption spectroscopy, and theoretical modeling, we systematically correlate the c-axis lattice expansion detected in SFCO films with a VO concentration gradient. Our results reveal a nearly linear relationship between oxygen off-stoichiometry and out-of-plane lattice expansion in coherently strained SFCO films, with δ increasing from 0.32 to 0.52 and the lattice expanding by ∼1.0%. Moreover, a significant decrease in Cr oxidation state (from Cr5+ to Cr3+) is observed as the VO concentration increases, while the Fe oxidation state remains fixed at Fe3+. Our findings provide a reliable way to quantify oxygen stoichiometry in complex oxides, offering a pathway to design materials with precisely tailored structure–property relationships.
Hossain, Mohammad Delower↗
Local rare-earth dopant structure in a complex-oxide/semiconductor heterojunction: Molecular beam epitaxy grown Yb-doped SrTiO3 on Si(001)
We have investigated the structural and electronic properties of Yb-doped SrTiO3/Si(001) grown by molecular beam epitaxy. Other rare-earth donor dopants that result in n-type conductivity typically substitute for Sr at the A-sites in the perovskite lattice. In contrast, Yb has been found to substitute predominantly for Ti at the perovskite B-sites based on data from atomically resolved scanning transmission electron microscopy and spectroscopy, as well as extended x-ray absorption fine structure. Yb exhibits two distinct charge states as determined by x-ray absorption spectroscopy and associated modeling, +2.7 and +2.1. These aliovalent substitutional dopants are compensated by donor electrons from oxygen vacancies that form during epitaxial film growth. An atom beam flux mismatch was present during film depositions because it was assumed that Yb would occupy A-sites, leading to a flux matching formula given by Yb + Sr = Ti. However, the formation of YbTi rather than YbSr results in Sr vacancies and extraneous (i.e. non-lattice) Ti atoms in the films, or on the film surfaces. The presence of these defects, together with oxygen vacancies, leads to deep-level electron traps that were detected by resonant photoemission and much higher sheet resistance than that associated with, for instance, La-doped films.
Chambers, Scott A. (ORCID:000000025415043X)↗
Layer Resolved Cr Oxidation State Modulation in Epitaxial SrFe 0.67 Cr 0.33 O 3−δ Thin Films
Understanding how doping influences physicochemical properties of ABO 3 perovskite oxides is critical for tailoring their functionalities. In this study, SrFe 0.67 Cr 0.33 O 3−δ epitaxial thin films were used to examine the effects of Fe and Cr competition on structure and B-site cation oxidation states. The films exhibit a perovskite-like structure near the film/substrate interface, while a brownmillerite-like structure with horizontal oxygen vacancy channels predominates near the surface. Electron energy loss spectroscopy shows Fe remains Fe 3+ , while Cr varies from ∼Cr 3+ (tetrahedral layers) to ∼Cr 4+ (octahedral layers) within brownmillerite phases and becomes ∼Cr 4.5+ in perovskite-like phases. Theoretical simulations indicate that Cr–O bond arrangements and the way oxygen vacancies interact with Cr and Fe drive Cr charge disproportionation. High-valent Cr cations introduce additional densities of states near the Fermi level, reducing the optical bandgap from ∼2.0 eV (SrFeO 2.5 ) to ∼1.7 eV (SrFe 0.67 Cr 0.33 O 3−δ ). In conclusion, these findings offer insights into B-site cation doping in the perovskite oxide framework.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Uncovering an Interfacial Band Resulting from Orbital Hybridization in Nickelate Heterostructures
The interaction of atomic orbitals at the interface of perovskite oxide heterostructures has been investigated for its profound impact on the band structures and electronic properties, giving rise to unique electronic states and a variety of tunable functionalities. In this study, we conducted an extensive investigation of the optical and electronic properties of epitaxial NdNiO 3 thin films grown on a series of single crystal substrates. Unlike films synthesized on other substrates, NdNiO 3 on SrTiO 3 (NNO/STO) gives rise to a unique band structure which features an additional unoccupied band situated above the Fermi level. Our comprehensive investigation, which incorporated a wide array of experimental techniques and density functional theory calculations, revealed that the emergence of the interfacial band structure is primarily driven by the orbital hybridization between Ti 3d orbitals of the STO substrate and O 2p orbitals of the NNO thin film. Furthermore, exciton peaks have been detected in the optical spectra of the NNO/STO film, attributable to the pronounced electron-electron (e-e) and electron-hole (e-h) interactions propagating from the STO substrate into the NNO film. Further, these findings underscore the substantial influence of interfacial orbital hybridization on the electronic structure of oxide thin-films, thereby offering key insights into tuning their interfacial properties.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
On the Topotactic Phase Transition Achieving Superconducting Infinite‐Layer Nickelates
Abstract Topotactic reduction is critical to a wealth of phase transitions of current interest, including synthesis of the superconducting nickelate Nd 0.8 Sr 0.2 NiO 2 , reduced from the initial Nd 0.8 Sr 0.2 NiO 3 /SrTiO 3 heterostructure. Due to the highly sensitive and often damaging nature of the topotactic reduction, however, only a handful of research groups have been able to reproduce the superconductivity results. A series of in situ synchrotron‐based investigations reveal that this is due to the necessary formation of an initial, ultrathin layer at the Nd 0.8 Sr 0.2 NiO 3 surface that helps to mediate the introduction of hydrogen into the film such that apical oxygens are first removed from the Nd 0.8 Sr 0.2 NiO 3 / SrTiO 3 (001) interface and delivered into the reducing environment. This allows the square‐planar / perovskite interface to stabilize and propagate from the bottom to the top of the film without the formation of interphase defects. Importantly, neither geometric rotations in the square planar structure nor significant incorporation of hydrogen within the films is detected, obviating its need for superconductivity. These findings unveil the structural basis underlying the transformation pathway and provide important guidance on achieving the superconducting phase in reduced nickelate systems.
36 MATERIALS SCIENCE↗
Publisher Correction: Unlocking Li superionic conductivity in face-centred cubic oxides via face-sharing configurations
In the version of the article initially published, the x axes in Figs. 2b,d and 5a,b originally read “T -1 (K -1 )” and have now been amended to “1000 T -1 (K -1 )” in the HTML and PDF versions of the article.
36 MATERIALS SCIENCE↗
Three-Dimensional Polymeric-Scaffold-Based Current Collector for a Lithium Metal Anode toward High-Energy-Density Batteries
Here, the practical applications of high-energy-density rechargeable lithium (Li) metal batteries (LMBs) have been impeded by the intrinsic issues of the Li metal anode (LMA) including high reactivity with electrolyte and dendritic formation. Conventional LMAs, which have the "hostless" feature consisting of a Li layer on a two-dimensional copper (Cu) foil as a current collector, led to additional loss in specific energy density, since Cu is a nonfaradaic heavy metal, bringing formidable areal capacity loss. To address these problems, a heat-treated three-dimensional-structured Cu-coated polyimide (HT-Cu@PI) membrane is designed and fabricated as a current collector. Benefiting from this unique material/structure, it enables not only better electrochemically deposited Li by a uniform/continuous Li-ion transport pathway but also a significant increase in the gravimetric/volumetric energy densities of LMBs by allowing more Li deposition in a fixed weight/volume. Therefore, this new LMA structure will accelerate the practical application of high-energy-density LMBs.
25 ENERGY STORAGE↗
Unlocking Li superionic conductivity in face-centred cubic oxides via face-sharing configurations
Oxides with a face-centred cubic (fcc) anion sublattice are generally not considered as solid-state electrolytes as the structural framework is thought to be unfavourable for lithium (Li) superionic conduction. Here we demonstrate Li superionic conductivity in fcc-type oxides in which face-sharing Li configurations have been created through cation over-stoichiometry in rocksalt-type lattices via excess Li. We find that the face-sharing Li configurations create a novel spinel with unconventional stoichiometry and raise the energy of Li, thereby promoting fast Li-ion conduction. The over-stoichiometric Li–In–Sn–O compound exhibits a total Li superionic conductivity of 3.38 × 10 -4 S cm -1 at room temperature with a low migration barrier of 255 meV. Our work unlocks the potential of designing Li superionic conductors in a prototypical structural framework with vast chemical flexibility, providing fertile ground for discovering new solid-state electrolytes.
36 MATERIALS SCIENCE↗
Direct Mapping of Fluorine in Cation Disordered Rocksalt Cathodes
Cation-disordered rocksalt (DRX) oxides are promising candidates as next-generation cathodes for lithium-ion batteries. Partial fluorination of the DRX oxides enhances their cyclability. However, the lattice position, concentration, and spatial distribution of fluorine within DRX lattices remain elusive. Here, in this work, we use atom location by channeling-enhanced microanalysis, energy-dispersive X-ray spectroscopy, electron energy loss spectroscopy, and integrated differential phase contrast imaging in a scanning transmission electron microscope to gain atomic-level insights into DRX with nominal composition of Li 1.2 Mn 0.7 Ti 0.1 O 1.7 F 0.3 and Li 1.15 Ni 0.45 Ti 0.3 Mo 0.1 O 1.85 F 0.15 . We reveal that fluorine substitutes oxygen in the DRX lattices. The O/F ratio in terms of O+F = 2 is in the range from 1.92:0.08 to 1.82:0.18. Spatially, fluorine is distributed in the proximity of the Li-rich regions but distinct from lithium fluoride. Additionally, we observe that incorporation of fluorine in the DRX lattice induces a larger variation in cation–anion separation. These observations provide insight into the guided design of oxyfluoride DRX cathodes for high-performance batteries.
(S)TEM↗
Enhanced Electrochemical Performance of Disordered Rocksalt Cathodes Enabled by a Graphite Conductive Additive
Cobalt-free cation-disordered rocksalt (DRX) cathodes are a promising class of materials for next-generation Li-ion batteries. Although they have high theoretical specific capacities (>300 mA h/g) and moderate operating voltages (~3.5 V vs Li/Li + ), DRX cathodes typically require a high carbon content (up to 30 wt %) to fully utilize the active material which has a detrimental impact on cell-level energy density. To assess pathways to reduce the electrode’s carbon content, the present study investigates how the carbon’s microstructure and loading (10–20 wt %) influence the performance of DRX cathodes with the nominal composition Li 1.2 Mn 0.5 Ti 0.3 O 1.9 F 0.1 . While electrodes prepared with conventional disordered carbon additives (C65 and ketjenblack) exhibit rapid capacity fade due to an unstable cathode/electrolyte interface, DRX cathodes containing 10 wt % graphite show superior cycling performance (e.g., reversible capacities ~260 mA h/g with 85% capacity retention after 50 cycles) and rate capability (~135 mA h/g at 1000 mA/g). Furthermore, a suite of characterization tools was employed to evaluate the performance differences among these composite electrodes. Overall, these results indicate that the superior performance of the graphite-based cathodes is largely attributed to the: (i) formation of a uniform graphitic coating on DRX particles which protects the surface from parasitic reactions at high states of charge and (ii) homogeneous dispersion of the active material and carbon throughout the composite cathode which provides a robust electronically conductive network that can withstand repeated charge–discharge cycles. Overall, this study provides key scientific insights on how the carbon microstructure and electrode processing influence the performance of DRX cathodes. Based on these results, exploration of alternative routes to apply graphitic coatings is recommended to further optimize the material performance.
25 ENERGY STORAGE↗
Enhancing the Electrode Gravimetric Capacity of Li 1.2 Mn 0.4 Ti 0.4 O 2 Cathode Using Interfacial Carbon Deposition and Carbon Nanotube-Mediated Electrical Percolation
Mn-based cation disordered rocksalt oxides (Mn-DRX) are emerging as promising cathode materials for next-generation Li-ion batteries due to their high specific capacities and cobalt and nickel free characteristic. However, to reach the theoretical capacity, solid-state method synthesized Mn-DRX materials require activation via post-synthetic ball milling, typically incorporating more than 20 wt.% conductive carbon that adversely reduces the electrode level gravimetric capacity. To solve this issue, we firstly deposit amorphous carbon on the surface of the Li 1.2 Mn 0.4 Ti 0.4 O 2 (LMTO) particles to increase the electrical conductivity by a five order of magnitude. Although the cathode material gravimetric first charge capacity reaches 180 mAh/g, its highly irreversible behavior leads to a 70 mAh/g first discharge capacity. Subsequently, to ensure a good electrical percolation network, the LMTO material is ball milled with multi-wall carbon nanotube (CNT) to obtain a 78.7 wt.% LMTO active material loading in the cathode electrode (LMTO-CNT). As a result, a 210 mAh/g cathode electrode gravimetric first charge and 165 mAh/g first discharge capacity are obtained, compared to the respective capacity values of 222 mAh/g and 155 mAh/g for the LMTO ball milled with 20 wt.% SuperP C65 electrode (LMTO-SP). After 50 cycles, the LMTO-CNT delivers a 121 mAh/g electrode gravimetric discharge capacity, largely outperforming the 44 mAh/g value of the LMTO-SP. In conclusion, our study demonstrates that while ball milling is necessary to achieve the theoretical capacity of LMTO, a careful selection of the additive, such as CNT, effectively reduces the required carbon quantity to achieve a higher electrode gravimetric discharge capacity.
25 ENERGY STORAGE↗
Tetragonal Kondo Insulator EuCd 2 Sb 2 Discovered via High Pressure High Temperature Synthesis
Abstract Magnetic and electronic properties of quantum materials heavily rely on the crystal structure even in the same chemical compositions. In this study, it is demonstrated that a layered tetragonal EuCd 2 Sb 2 structure can be obtained by treating bulk trigonal EuCd 2 Sb 2 under high pressure (6 GPa) and high temperature (600 °C). Magnetization measurements of the newly formed layered tetragonal EuCd 2 Sb 2 confirm an antiferromagnetic ordering with Neel temperature ( T N ) around 16 K, which is significantly higher than that ( T N ≈ 7 K) of trigonal EuCd 2 Sb 2 , consistent with heat capacity measurements. Moreover, bad metal behavior is observed in the temperature dependence of the electrical resistivity and the resistivity shows a dramatic increase around the Neel temperature. Electronic structure calculations with local density approximation dynamic mean–field theory (LDA+DMFT) show that this material is strongly correlated with well‐formed large magnetic moments, due to Hund's coupling, which is known to dramatically suppress the Kondo scale.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Ultrahigh-Capacity Rocksalt Cathodes Enabled by Cycling-Activated Structural Changes
Mn-redox-based oxides and oxyfluorides are considered the most promising earth-abundant high-energy cathode materials for next-generation lithium-ion batteries. While high capacities are obtained in high-Mn content cathodes such as Li- and Mn-rich layered and spinel-type materials, local structure changes and structural distortions ( often lead to voltage fade, capacity decay, and impedance rise, resulting in unacceptable electrochemical performance upon cycling. In the present study, structural transformations that exploit the high capacity of Mn-rich oxyfluorides while enabling stable cycling, in stark contrast to commonly observed structural changes that result in rapid performance degradation, are reported. Here, it is shown that upon cycling of a cation-disordered rocksalt (DRX) cathode (Li 1.1 Mn 0.8 Ti 0.1 O 1.9 F 0.1 , an ultrahigh capacity of ≈320 mAh g –1 (energy density of ≈900 Wh kg –1 ) can be obtained through dynamic structural rearrangements upon cycling , along with a unique voltage profile evolution and capacity rise. At high voltage, the presence of Mn 4+ and Li + vacancies promotes local cation ordering, leading to the formation of domains of a “δ phase” within the disordered framework. On deep discharge, Mn 4+ reduction, along with Li + insertion transform the structure to a partially ordered DRX phase with a β'-LiFeO 2 -type arrangement. At the nanoscale, domains of the in situ formed phases are randomly oriented, allowing highly reversible structural changes and stable electrochemical cycling. These new insights not only help explain the superior electrochemical performance of high-Mn DRXbut also provide guidance for the future development of Mn-based, high-energy density oxide, and oxyfluoride cathode materials.
25 ENERGY STORAGE↗
Toward Stable Cycling of a Cost-Effective Cation-Disordered Rocksalt Cathode via Fluorination
The recently developed Li-excess cation-disordered rock salts (DRXs) exhibit an excellent chemical diversity for the development of alternative Co/Ni-free high-energy cathodes. Herein, the synthesis of a highly fluorinated DRX cathode, Li 1.2 Mn 0.6 Ti 0.2 O 1.8 F 0.2 , based on cost-effective and earth-abundant transition metals, via a solid-state reaction, is reported. The fluorinated DRX cathode using ammonium fluoride precursor exhibits more uniform particle size and delivers a specific discharge capacity of 233 mAh g -1 and specific energy of 754 Wh kg -1 , with 206 mAh g -1 retained after 200 cycles. Further, the combined synchrotron X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectroscopy analysis reveals that the remarkable cycling performance is attributed to the high fluorination and thus enhanced Mn content, enabling the utilization of more Mn redox than the oxide analog. This study demonstrates a great promise to develop next-generation cost-effective DRX cathodes with enhanced capacity retention for high-energy Li-ion batteries.
25 ENERGY STORAGE↗
Stacking Faults Assist Lithium-Ion Conduction in a Halide-Based Superionic Conductor
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗