Search NASA⌕ Search

Engineering topics

Koizumi, K

Publications and source records attributed to Koizumi, K.

FISSION NEUTRON IRRADIATION EFFECT ON INTERLAMINAR SHEAR STRENGTH OF CYANATE ESTER RESIN GFRP AT RT AND 77 K

A glass fiber reinforced plastic (GFRP) with cyanate ester resin was fabricated and neutron irradiation tests up to 1x10{sup 22} n/m{sup 2} of fast neutron with over 0.1 MeV energy were carried out in fission reactor. The fabrication process of cyanate ester GFRP was established and a collaboration network to perform investigations on irradiation effect of superconducting magnet materials was constructed. Three kinds of samples were fabricated. The first was CTD403 GFRP made by NIFS, the second was (cyanate ester+epoxy) GFRP provided by Toshiba, and the last was CTD403 GFRP made by Toshiba. The irradiation was carried out at JRR-3 in Japan Atomic Energy Agency using Rabbit capsules.After the irradiation, short beam tests were conducted at room temperature and 77 K and interlaminar shear strength (ILSS) was evaluated. The irradiation of 1x10{sup 21} n/m{sup 2} increased ILSS a little but 1x10{sup 22} n/m{sup 2} irradiation decreased ILSS to around 50 MPa. These tendencies were observed in all three kinds of GFRPs.

36 MATERIALS SCIENCE↗

Geometry Optimization without Spin Contamination Error - Approximately Spin Projected Optimization Method -

A geometry optimization method based on Yamaguchi's approximate spin projection procedure is presented. This method, which can eliminate an effect of a spin contamination from a broken symmetry solution, is applied to several biradical systems such as CH{sub 2}, Cr{sub 2}(O{sub 2}CCH{sub 3}){sub 4}(H{sub 2}O){sub 2} and an active site of oxygenated hemocyanin. The results show that the spin contamination error in the structure optimized by the BS method is not negligible.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗