Engineering topics

Korus, R. A.

Publications and source records attributed to Korus, R. A..

6 records

NASA NTRS1981

Perfluoroether triazine elastomers

The synthesis of high performance elastomers with the high thermal stability and chemical, inertness of perfluoroalkylene triazine and a low glass transition temperature is discussed. Perfluorether triazine elastomers were proposed as potentially superior. It is concluded that the difficulties experienced in fluoroalkytriazine elastomer synthesis can be overcome by a four-step reaction process involving chain extension, triazine ring closure, crosslinking, and elastomer curing. Molecular weight can be controlled in the initial polymer formation so that elastomer modulus can be determined. The final product elastomers exhibit a useful elastomeric range of approximately 45 to 325 C with an oxidative stability superior to other broad range elastomers.

Korus, R. A.↗

NASA NTRS1980

Process for the preparation of fluorine containing crosslinked elastomeric polytriazine and product so produced

Crosslinking elastomeric polytriazines are prepared by a 4 step procedure which consists of (1) forming a poly(imidoylamidine) by the reaction, under reflux conditions, of anhydrous ammonia with certain perfluorinated alkyl or alkylether dinitriles; (2) forming a linear polytriazine by cyclizing the imidoylamidine linkages by reaction with certain perfluorinated alkyl or alkylether acid anhydrides or halides; (3) extending the linear polytriazine chain by further refluxing in anhydrous ammonia; and (4) heating to cyclize the new imidoylamidine and thereby crosslink the polymer.

Rosser, R. W.↗

NASA NTRS1980

Four-step reaction for polytriazine elastomers

Four step imidoylamidine reaction sequence is used to make crosslinked polyperfluoralkyltriazines with superior elastomeric properties, greater molecular weight, and crosslinking control. Polymers can find useful application in fuel tank sealants, o-ring, wire enamels, pneumatic ducts, and many other applications.

Rosser, R. W.↗

NASA NTRS1980

Perfluroether triazine elastomers

In order to obtain high performance elastomers with the high thermal stability and chemical inertness of perfluoroalkylene triazine and a low glass transition temperature, perfluoroether triazine elastomers were synthesized. The procedure for elastomer synthesis is described as well as general experimental methods. Results are presented and discussed. The screening of catalysts for the dehydration of perfluoroether diamide is also considered.

Korus, R. A.↗

NASA NTRS1980

Synthesis of perfluoroalkylether triazine elastomers

A method of perfluoroalkylether triazine elastomer synthesis is described. To form an elastomer, the resultant polymer is heated in a closed oven at slightly reduced pressures for 1-day periods at 100, 130 and 150 C. A high-molecular-weight perfluoroalkylether triazine elastomer is produced that exhibits thermal and oxidative stability. This material is potentially useful in applications such as high-temperature seals, 'O' rings, and wire enamels.

Rosser, R. W.↗

NASA NTRS1979

Synthesis of perfluoroalkylether oxadiazole elastomers

A method for the simultaneous chain extension and crosslinking of perfluoroalkylethers which yields a thermally stable perfluoroalkylether oxadiazole elastomer crosslinked by trifunctional perfluoroalkylether-1,3,5-triazine is reported. In the preparation, hydroxylamine crystals prepared from hydroxylamine hydrochloride to which sodium butoxide had been added is mixed with perfluoroalkylether dinitrile to obtain the monomer, as the nitrile is converted to amidoxime. Monomers are heated at 140 to 200 C to form poly(perfluoroalkylether oxadiazole) with a 1,2,4-oxadiazole structure by a step-growth polymerization reaction. Simultaneous chain extension and crosslinking are observed to occur when the purified monomer is heated directly and when the remaining nitrile in the monomer is allowed to react with excess ammonia to form the corresponding amidine, which is then heated. Weight loss studies show the thermal stability of the perfluoroalkylether elastomer to be generally better than fluorosilicone or polyester elastomers, especially in air, indicating its potential usefulness for high-performance elastomeric applications.

Rosser, R. W.↗