Search NASA⌕ Search

Engineering topics

Koshy, David M.

Publications and source records attributed to Koshy, David M..

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Investigation of the Structure of Atomically Dispersed NiN x Sites in Ni and N-Doped Carbon Electrocatalysts by 61 Ni Mössbauer Spectroscopy and Simulations

Ni and nitrogen-doped carbons are selective catalysts for CO 2 reduction to CO (CO 2 R), but the hypothesized NiNx active sites are challenging to probe with traditional characterization methods. Here, we synthesize 61 Ni-enriched model catalysts, termed 61 NiPACN, in order to apply 61 Ni Mössbauer spectroscopy using synchrotron radiation ( 61 Ni-SR-MS) to characterize the structure of these atomically dispersed NiNx sites. First, we demonstrate that the CO 2 R results and standard characterization techniques (SEM, PXRD, XPS, XANES, EXAFS) point to the existence of dispersed Ni active sites. Then, 61 Ni-SR-MS reveal significant internal magnetic fields of ~5.4 T, which is characteristic of paramagnetic, high-spin Ni 2+ , in the 61NiPACN samples. Finally, theoretical calculations for a variety of Ni-N x moieties confirm that high-spin Ni 2+ is stable in non-planar, tetrahedrally distorted geometries, which results in calculated isotropic hyperfine coupling that is consistent with 61 Ni-SR-MS measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Vapor–Fed Electrolyzers for Carbon Dioxide Reduction Using Tandem Electrocatalysts: Cuprous Oxide Coupled with Nickel–Coordinated Nitrogen–Doped Carbon

We report ethylene is particularly attractive due to its major importance as a feedstock for various applications including the polymer industry. As such, catalyst and electrolyzer developments are crucial to achieve industrially relevant ethylene production and efficiency levels. In this work, a tandem electrocatalyst composed of copper nanocubes and nickel-coordinated nitrogen-doped carbon (NiNC) is presented, which is integrated into gas diffusion electrodes (GDEs) for direct conversion of vapor-fed CO 2 into ethylene. Evaluation of tandem GDEs in the vapor-fed flow electrolyzer shows significantly increased ethylene selectivity in terms of faradaic efficiency and C 2 H 4 /CO ratio compared to a non-tandem copper GDE. The enhancements are attributed to the increased local CO availability near the copper surface via effective CO 2 to CO conversion on neighboring NiNC. The experimental results are validated by 3D resolved continuum simulations, which show increased flux of higher-order prod-ucts with the added CO flux from NiNC. The practical viability of Cu/NiNC catalyst is further evaluated in a membrane electrode assembly electrolyzer, achieving 40% FE toward ethylene at 150 mA cm -2 and 3.2 V. These find-ings highlight the high selectivity and formation rate of ethylene achieved by successful device integration of the Cu/NiNC catalyst, demonstrating the potential for implementation in large-scale sustainable CO 2 electrolyzers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modulating the optoelectronic properties of hybrid Mo-thiolate thin films

In this study, hybrid MoS 2 -based molybdenum thiolate thin films with selected organic motifs are grown using molecular layer deposition (MLD), allowing for tunable optoelectronic film properties. The thin films are deposited at 170°C using the metal precursor molybdenum hexacarbonyl and one of the three organic precursors: 1,2-ethanedithiol, 1,4-butanedithiol, and 1,4-benzenedithiol. The resulting Mo-ethanethiolate, Mo-butanethiolate, and Mo-benzenethiolate films show saturating growth with a growth per cycle of 1.2, 1.0, and 1.5 Å/cycle, respectively. Fourier transform infrared spectroscopy, x-ray photoelectron spectroscopy, Raman spectroscopy, x-ray absorption spectroscopy, and x-ray diffraction are used to characterize the as-deposited films. Results show that by changing the organic precursor, the film composition as well as the optical and electronic properties can be tuned. The Mo-thiolate films grown with benzenedithiol exhibit the lowest resistivity, which at 12 mΩ cm is ~400 times more conductive than Mo-thiolates grown with aliphatic organic linkers. All three backbone chemistries of the Mo-thiolates show an optical bandgap between 2.3 and 2.4 eV and mild photoconductivity response. The MLD of these Mo-thiolate films demonstrates the synthesis of transition metal-organosulfur thin films with tunable properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chemical Modifications of Ag Catalyst Surfaces with Imidazolium Ionomers Modulate H 2 Evolution Rates during Electrochemical CO 2 Reduction

Bridging polymer design with catalyst surface science is a promising direction for tuning and optimizing electrochemical reactors that could impact long-term goals in energy and sustainability. Particularly, the interaction between inorganic catalyst surfaces and organic-based ionomers provides an avenue to both steer reaction selectivity and promote activity. In this work, we studied the role of imidazolium-based ionomers for electrocatalytic CO 2 reduction to CO (CO 2 R) on Ag surfaces and found that they produce no effect on CO 2 R activity yet strongly promote the competing hydrogen evolution reaction (HER). By examining the dependence of HER and CO 2 R rates on concentrations of CO 2 and HCO 3 –, we developed a kinetic model that attributes HER promotion to intrinsic promotion of HCO 3 – reduction by imidazolium ionomers. We also show that varying the ionomer structure by changing substituents on the imidazolium ring modulates the HER promotion. This ionomer-structure dependence was analyzed via Taft steric parameters and density functional theory calculations, which suggest that steric bulk from functionalities on the imidazolium ring reduces access of the ionomer to both HCO 3 – and the Ag surface, thus limiting the promotional effect. Our results help develop design rules for ionomer–catalyst interactions in CO 2 R and motivate further work into precisely uncovering the interplay between primary and secondary coordination in determining electrocatalytic behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bridging Thermal Catalysis and Electrocatalysis: Catalyzing CO 2 Conversion with Carbon‐Based Materials

Abstract Understanding the differences between reactions driven by elevated temperature or electric potential remains challenging, largely due to materials incompatibilities between thermal catalytic and electrocatalytic environments. We show that Ni, N‐doped carbon (NiPACN), an electrocatalyst for the reduction of CO 2 to CO (CO 2 R), can also selectively catalyze thermal CO 2 to CO via the reverse water gas shift (RWGS) representing a direct analogy between catalytic phenomena across the two reaction environments. Advanced characterization techniques reveal that NiPACN likely facilitates RWGS on dispersed Ni sites in agreement with CO 2 R active site studies. Finally, we construct a generalized reaction driving‐force that includes temperature and potential and suggest that NiPACN could facilitate faster kinetics in CO 2 R relative to RWGS due to lower intrinsic barriers. This report motivates further studies that quantitatively link catalytic phenomena across disparate reaction environments.

Koshy, David M.↗
DOE OSTI2021

Bridging Thermal Catalysis and Electrocatalysis: Catalyzing CO 2 Conversion with Carbon-Based Materials

Understanding the differences between reactions driven by elevated temperature or electric potential remains challenging, largely due to materials incompatibilities between thermal catalytic and electrocatalytic environments. In this work, we show that Ni, N-doped carbon (NiPACN), an electrocatalyst for the reduction of CO 2 to CO (CO 2 R), can also selectively catalyze thermal CO 2 to CO via the reverse water gas shift (RWGS) representing a direct analogy between catalytic phenomena across the two reaction environments. Advanced characterization techniques reveal that NiPACN likely facilitates RWGS on dispersed Ni sites in agreement with CO 2 R active site studies. Finally, we construct a generalized reaction driving-force that includes temperature and potential and suggest that NiPACN could facilitate faster kinetics in CO 2 R relative to RWGS due to lower intrinsic barriers. This report motivates further studies that quantitatively link catalytic phenomena across disparate reaction environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A refraction correction for buried interfaces applied to in situ grazing-incidence X-ray diffraction studies on Pd electrodes

In situ characterization of electrochemical systems can provide deep insights into the structure of electrodes under applied potential. Grazing-incidence X-ray diffraction (GIXRD) is a particularly valuable tool owing to its ability to characterize the near-surface structure of electrodes through a layer of electrolyte, which is of paramount importance in surface-mediated processes such as catalysis and adsorption. Corrections for the refraction that occurs as an X-ray passes through an interface have been derived for a vacuum–material interface. In this work, a more general form of the refraction correction was developed which can be applied to buried interfaces, including liquid–solid interfaces. Furthermore, the correction is largest at incidence angles near the critical angle for the interface and decreases at angles larger and smaller than the critical angle. Effective optical constants are also introduced which can be used to calculate the critical angle for total external reflection at the interface. This correction is applied to GIXRD measurements of an aqueous electrolyte–Pd interface, demonstrating that the correction allows for the comparison of GIXRD measurements at multiple incidence angles. This work improves quantitative analysis of d-spacing values from GIXRD measurements of liquid–solid systems, facilitating the connection between electrochemical behavior and structure under in situ conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Metal–Ligand Based Mechanophores Enhance Both Mechanical Robustness and Electronic Performance of Polymer Semiconductors

The backbone of diketopyrrolopyrrole-thiophene-vinylene-thiophene-based polymer semiconductors (PSCs) is modified with pyridine (Py) or bipyridine ligands to complex Fe(II) metal centers, allowing the metal–ligand complexes to act as mechanophores and dynamically crosslink the polymer chains. Here, mono- and bi-dentate ligands are observed to exhibit different degrees of bond strengths, which subsequently affect the mechanical properties of these Wolf-type-II metallopolymers. The counter ion also plays a crucial role, as it is observed that Py-Fe mechanophores with non-coordinating BPh 4 – counter ions (Py-FeB) exhibit better thin film ductility with lower elastic modulus, as compared to the coordinating chloro ligands (Py-FeC). Interestingly, besides mechanical robustness, the electrical charge carrier mobility can also be enhanced concurrently when incorporating Py-FeB mechanophores in PSCs. This is a unique observation among stretchable PSCs, especially that most reports to date describe a decreased mobility when the stretchability is improved. Next, it is determined that improvements to both mobility and stretchability are correlated to the solid-state molecular ordering and dynamics of coordination bonds under strain, as elucidated via techniques of grazing-incidence X-ray diffraction and X-ray absorption spectroscopy techniques, respectively. This study provides a viable approach to enhance both the mechanical and the electronic performance of polymer-based soft devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electrolyte Engineering for Efficient Electrochemical Nitrate Reduction to Ammonia on a Titanium Electrode

Nitrates from agricultural runoff and industrial waste streams are a notorious waste product and hazardous pollutant. Traditional electrochemical water remediation approaches aim to solve this problem by converting nitrates to environmentally benign N 2 while minimizing the production of environmentally hazardous side products such as ammonia and nitrous oxide in a process known as “denitrification”. We modify this concept and outline an opportunity to optimize the conversion of nitrates into ammonia, which is also a key commodity product used as a fertilizer, potential fuel, and chemical precursor. The electrochemical conversion of nitrates to ammonia recycles the fixed nitrogen and offers an appealing and supplementary alternative to the energy- and resource-intensive Haber-Bosch process. In this study, we investigated the effect of varying electrochemical conditions (pH, nitrate concentration, and applied potential) on the selective reduction of nitrate to ammonia at a titanium cathode. We observed that high concentrations of both protons and nitrate ions are needed to achieve high selectivity, reaching a peak of 82% Faradaic efficiency to ammonia at an applied potential of -1 V versus RHE and a partial current density to NH 3 of -22 mA/cm 2 , using 0.4 M [NO 3 – ] at pH ~0.77. The Ti electrode, as a poor hydrogen evolution catalyst with notable corrosion resistance, provides a large window of operating conditions to achieve high selectivity in the reduction of nitrate anions. Stability of the system was evaluated, and we found a high Faradaic efficiency throughout the course of an 8 h experiment. After electrochemical testing, titanium hydride was observed at the cathode surface. We also show a preliminary technoeconomic study, indicating that it may be feasible to employ an electrochemical strategy for the production of ammonium nitrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Understanding the Origin of Highly Selective CO 2 Electroreduction to CO on Ni,N‐doped Carbon Catalysts

Abstract Ni,N‐doped carbon catalysts have shown promising catalytic performance for CO 2 electroreduction (CO 2 R) to CO; this activity has often been attributed to the presence of nitrogen‐coordinated, single Ni atom active sites. However, experimentally confirming Ni−N bonding and correlating CO 2 reduction (CO 2 R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile‐derived Ni,N‐doped carbon electrocatalysts (Ni‐PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO 2 R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X‐ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square‐planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.

Koshy, David M.↗