Engineering topics

Kottapalli, Sesi

Publications and source records attributed to Kottapalli, Sesi.

21 records · Page 2

NASA NTRS1992

Blade root torsional dampers to reduce hub loads

A new method of reducing helicopter rotor hub loads and marginally improving rotor performance by the introduction of large values of blade root torsional damping is presented. Basic theoretical considerations imply that these benefits in hub loads can come about by changes to the blade elastic torsional deflection. This basic theory was analytically verified by using a fully coupled aeroelastic rotorcraft analysis as applied to a modern, articulated rotor blade, namely that of the Sikorsky S-76. From an implementation standpoint, a rotor-based torsional damping device may be more practical than one that involves a major portion of the blade span. Also, a root-based device may allow for the retrofitting of existing helicopter rotor blade/hub configurations.

Kottapalli, Sesi↗

NASA NTRS1992

Analysis of open loop higher harmonic control at high airspeeds on a modern four-bladed articulated rotor

The effects of open loop higher harmonic control (HHC) on rotor hub loads, performance, and push rod loads of a Sikorsky S-76 helicopter rotor at high airspeeds (up to 200 knots) and moderate lift (10,000 lbs) were studied analytically. The present analysis was performed as a part of a wind tunnel pre-test prediction and preparation procedure, as well as to provide analytical results for post-test correlation efforts. The test associated with this study is to be concluded in the 40- by 80-Foot Wind Tunnel of the National Full-Scale Aerodynamics Complex (NFAC) at the NASA Ames Research Center. The results from this analytical study show that benefits from HHC can be achieved at high airspeeds. These results clear the way for conducting (with the requirement of safe pushrod loads) an open loop HHC test at high airspeeds in the 40- by 80-Foot Wind Tunnel using an S-76 rotor as the test article.

Kottapalli, Sesi↗

NASA NTRS1991

Analysis of open loop higher harmonic control at high airspeeds on a modern four-bladed articulated rotor

The effects of open loop higher harmonic control (HHC) on rotor hub loads, performance, and push rod loads of a Sikorsky S-76 helicopter rotor at high airspeeds (up to 200 knots) and moderate lift (10,000 lbs) were studied analytically. The analysis was performed as part of a wind tunnel pre-test prediction and preparation procedure, as well as to provide analytical results for post-test correlation efforts. The test associated with this study is to be concluded in the 40- by 80-Foot Wind Tunnel of the National Full-Scale Aerodynamics Complex (NFAC) at the NASA Ames Research Center. The results from this analytical study show that benefits from HHC can be achieved at high airspeeds. These results clear the way for conducting (with the requirement of safe pushrod loads) an open loop HHC test a high airspeeds in the 40- by 80-Foot Wind Tunnel using an S-76 rotor as the test article.

Kottapalli, Sesi↗