Search NASA⌕ Search

Engineering topics

Kovach, R. L.

Publications and source records attributed to Kovach, R. L..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

The Viking seismometry

Efforts were made to determine the seismicity of Mars as well as define its internal structure by detecting vibrations generated by marsquakes and meteoroid impacts. The lack of marsquakes recognized in the Viking data made it impossible to make any direct inferences about the interior of Mars and only allowed the setting of upper bounds on the seismic activity of the planet. After obtaining more than 2100 hours worth of data during the quite periods at rates of one sample per second or higher, the Viking 2 seismometer was turned off as a consequence of a landing system failure. During the periods when adequate data were obtained, one event of possible seismic or meteoroid impact origin was recognized; however, there is a significant probability that this event was generated by a wind gust.

Lazarewicz, A. R.↗
NASA NTRS1977

Seismology on Mars

High-quality data (uncontaminated by lander or wind noise) obtained with a three-axis short-period seismometer operating on Mars in the Utopia Planitia region are analyzed. No large events have been detected during the first five months of operation covered in the present paper. This indicates that Mars is less seismically active than the earth. Winds, and therefore a seismic background, began to intrude into the nighttime hours, starting with sol 119 (sol is a Martian day). The seismic background correlates well with wind velocity, and is proportional to the square of the wind velocity, as is appropriate for turbulent flow. A local seismic event of a magnitude of 3 and a distance of 110 km was detected on sol 80. It is interpreted as a natural seismic event.

Anderson, D. L.↗
NASA NTRS1976

The Viking seismic experiment

A three-axis short-period seismometer is now operating on Mars in the Utopia Planitia region. The noise background correlates well with wind gusts. Although no quakes have been detected in the first 60 days of observation, it is premature to draw any conclusions about the seismicity of Mars. The instrument is expected to return data for at least 2 years.

Anderson, D. L.↗
NASA NTRS1975

Energy, frequency, and distance of moonquakes at the Apollo 17 site

'Thermal' moonquakes have been detected at the Apollo 17 site. A typical event releases about 1 to 10 million ergs of energy. The annual seismic energy release for the events observed in the Taurus-Littrow Valley is estimated at 100 billion ergs. Such small events would not cause impossibly rapid erosion on either the North Massif or within the craters of the Central Cluster. Seismic events become increasingly frequent after sunrise and reach a maximum at sunset. The largest events, however, occur most commonly near lunar noon. Rise times of the seismic signals, after being calibrated by the well-located Lunar Seismic Profiling Experiment (LSPE) seismic sources, were used to estimate distances to the seismic events. Most seismic events (about 90%) appear to occur within 2.5 km of the seismometer array.

Cooper, M. R.↗
NASA NTRS1974

Lunar near-surface structure

Seismic refraction data obtained at the Apollo 14, 16, and 17 landing sites permit a compressional wave velocity profile of the lunar near surface to be derived. Beneath the regolith at the Apollo 14 Fra Mauro site and the Apollo 16 Descartes site is material with a seismic velocity of about 300 m/sec, believed to be brecciated material or impact-derived debris. Considerable detail is known about the velocity structure at the Apollo 17 Taurus-Littrow site. Seismic velocities of 100, 327, 495, 960, and 4700 m/sec are observed. The depth to the top of the 4700-m/sec material is 1385 m, compatible with gravity estimates for the thickness of mare basaltic flows, which fill the Taurus-Littrow valley. The observed magnitude of the velocity change with depth and the implied steep velocity-depth gradient of more than 2 km/sec/km are much larger than have been observed on compaction experiments on granular materials and preclude simple cold compaction of a fine-grained rock powder to thicknesses of the order of kilometers.

Cooper, M. R.↗
NASA NTRS1974

Implications of elastic wave velocities for Apollo 17 rock powders

Ultrasonic P- and S-wave velocities of lunar rock powders 172701, 172161, 170051, and 175081 were measured at room temperature and to 2.5 kb confining pressure. The results compare well with those of terrestrial volcanic ash and powdered basalt. P-wave velocity values up to pressures corresponding to a lunar depth of 1.4 km preclude cold compaction alone as an explanation for the observed seismic velocity structure at the Apollo 17 site. Application of small amounts of heat with simultaneous application of pressure causes rock powders to achieve equivalence of seismic velocities for competent rocks.

Talwani, P.↗
NASA NTRS1973

Compressional and shear wave velocities in granular materials to 2.5 kilobars

The velocities of seismic compressional waves and, for the first time, shear wave velocities in silica sand, volcanic ash, and basalt powder were determined under hydrostatic confining pressures to 2.5 kb. Simultaneously, the porosity of these materials was obtained as a function of confining pressure. The presented results have important implications for the self-compaction hypothesis that has been postulated to explain the lunar near-surface seismic velocity variation.

Talwani, P.↗
NASA NTRS1973

Apollo 17 seismic profiling - Probing the lunar crust.

Apollo 17 seismic data are interpreted to determine the structure of the lunar crust to a depth of several kilometers. Seismic velocity increases in a marked stepwise manner beneath the Taurus-Littrow region at the Apollo 17 site. A thickness of about 1200 meters is indicated for the infilling mare basalts at Taurus-Littrow. The apparent velocity is high (about 4 kilometers per second) in the material immediately underlying the basalts.

Kovach, R. L.↗
NASA NTRS1973

The velocity structure of the lunar crust.

Seismic refraction data, obtained at the Apollo 14 and 16 sites, when combined with other lunar seismic data, allow a compressional wave velocity profile of the lunar near-surface and crust to be derived. The regolith, although variable in thickness over the lunar surface, possesses surprisingly similar seismic properties. Underlying the regolith at both the Apollo 14 Fra Mauro site and the Apollo 16 Descartes site is low-velocity brecciated material or impact derived debris. Key features of the lunar seismic velocity profile are: (1) velocity increases from 100 to 300 m/sec in the upper 100 m to about 4 km/sec at 5 km depth, (2) a more gradual increase from about 4 km/sec to about 6 km/sec at 25 km depth,(3) a discontinuity at a depth of 25 km, and (4) a constant value of about 7 km/sec at depths from 25 km to about 60 km.

Kovach, R. L.↗
NASA NTRS1973

The structure of the lunar crust at the Apollo 17 site

A seismic profiling experiment was successfully executed on the lunar surface during the Apollo 17 mission allowing a determination of the structure of the lunar crust to a depth of several kilometers. The most outstanding feature of the seismic velocity variation, in the Taurus-Littrow region, is the stepwise increase with depth. A total thickness of about 1200 meters for the infilling mare basalts at the 17 landing site is also indicated from the seismic results. The apparent velocity is high (about 4 km/sec for P waves) in the material below the basalts.

Kovach, R. L.↗
NASA NTRS1972

The lunar interior.

For materials thought to be important in the lunar interior, compressional velocities are estimated and compared with lunar seismic data. The results obtained support the conclusion that the moon is an extremely well differentiated body. This is consistent with thermal history calculations which suggest that the moon was close to or in excess of melting (solidus) temperatures throughout most of its volume early in its history.

Anderson, D. L.↗
NASA NTRS1972

Apollo 14 active seismic experiment.

Explosion seismic refraction data indicate that the lunar near-surface rocks at the Apollo 14 site consist of a regolith 8.5 meters thick and characterized by a compressional wave velocity of 104 meters per second. The regolith is underlain by a layer with a compressional wave velocity of 299 meters per second. The thickness of this layer, which we interpret to be the Fra Mauro Formation, is between 16 and 76 meters. The layer immediately beneath this has a velocity greater than 370 meters per second. We found no evidence of permafrost.

Watkins, J. S.↗
NASA NTRS1972

The lunar interior

The compressional velocities are estimated for materials in the lunar interior and compared with lunar seismic results. The lower crust has velocities appropriate for basalts or anorthosites. The high velocities associated with the uppermost mantle imply high densities and a change in composition to a lighter assemblage at depths of the order of 120 km. Calcium and aluminum are probably important components of the upper mantle and are deficient in the lower mantle. Much of the moon may have accreted from material similar in composition to eucrites. The important mineral of the upper mantle is garnet; possible accessory minerals are kyanite, spinel, and rutile. If the seismic results stand up, the high velocity layer in the moon is more likely to be a high pressure form of anorthosite than eclogite, pyroxenite, or dunite. The thickness of the layer is of the order of 50 km. Cosmic abundances can be maintained if the lower mantle is ferromagnesium silicate with minimal amounts of calcium and aluminum. Achondrites such as eucrites and howardites have more of the required characteristics of the lunar interior than carbonaceous chondrites. A density inversion in the moon is a strong possibility.

Anderson, D. L.↗
NASA NTRS1972

Seismic investigations - The Viking Mars Lander.

A lightweight three-component short period seismometer has been developed for preliminary seismic investigations of Mars. Because of weight and data-rate constraints the Viking seismic experiment is far from optimal but it should, at a minimum, provide information about the microseismic level and an upper bound on the seismicity of the planet. If Mars is tectonically active a start can be made on the problem of the internal structure, dynamics, and composition of the planet. A good distribution of modest sized Marsquakes will make it possible to determine if Mars has a core. The size of the core is related to the conditions of planetary formation.

Anderson, D. L.↗
NASA NTRS1972

Shear wave velocities in the earth's mantle.

Direct measurement of the travel time gradient for S waves together with travel time data are used to derive a shear velocity model for the earth's mantle. In order to satisfy the data it is necessary to discard the usual assumption of lateral homogeneity below shallow depths. A shear velocity differential is proposed for a region between western North America and areas of the Pacific Ocean. Distinctive features of the velocity model for the upper mantle beneath western North America are a low-velocity zone centered at 100 km depth and zones of high velocity gradient beginning at 400, 650, and 900 km.

Robinson, R.↗
NASA NTRS1972

Active seismic experiment

The Apollo 16 active seismic experiment (ASE) was designed to generate and monitor seismic waves for the study of the lunar near-surface structure. Several seismic energy sources are used: an astronaut-activated thumper device, a mortar package that contains rocket-launched grenades, and the impulse produced by the lunar module ascent. Analysis of some seismic signals recorded by the ASE has provided data concerning the near-surface structure at the Descartes landing site. Two compressional seismic velocities have so far been recognized in the seismic data. The deployment of the ASE is described, and the significant results obtained are discussed.

Kovach, R. L.↗
NASA NTRS1972

The lunar interior

The compressional velocities are estimated for materials thought to be important in the lunar interior and compared with lunar seismic results. The lower lunar crust has velocities appropriate for basalts or anorthosites. Anorthosite is preferred if lunar basalts result from a small degree of partial melting. The high velocities associated with the uppermost mantle imply high densities and a change to a lighter assemblage at depths of the order of 120 km. Ca- and Al-rich minerals are important components of both the lower crust and the upper mantle. Most of the moon may have accreted from refractory material rich in Ca, Al, U, and the rare-earth elements. The important mineral of the upper mantle is garnet; possible accessory minerals are kyanite, spinel and rutile. If the seismic results stand up, the high-velocity layer in the moon is more likely to be a high-pressure form of anorthosite than eclogite, pyroxenite, or dunite.

Anderson, D. L.↗