Search NASA⌕ Search

Engineering topics

Kramer, Edward J.

Publications and source records attributed to Kramer, Edward J..

At least 19 records

Role of solution structure in self-assembly of conjugated block copolymer thin films

Conjugated block copolymers provide a pathway to achieve thermally stable nanostructured thin films for organic solar cells. We characterized the structural evolution of poly(3-hexylthiophene)- block -poly(diketopyrrolopyrrole–terthiophene) (P3HT- b -DPPT-T) from solution to nanostructured thin films. Aggregation of the DPPT-T block of P3HT- b -DPPT-T was found in solution by small-angle X-ray scattering with the P3HT block remaining well-solvated. The nanostructure in thin films was determined using a combination of wide and small-angle X-ray scattering techniques as a function of processing conditions. The structure in solution controlled the initial nanostructure in spin-cast thin films, allowing subsequent thermal annealing processes to further improve the ordering. In contrast to the results for thin films, nanostructural ordering was not observed in the bulk samples by small-angle X-ray scattering. Finally, these results suggest the importance of controlling solvent induced aggregation in forming nanostructured thin films of conjugated block copolymers.

14 SOLAR ENERGY↗

Mechanics of an Asymmetric Hard-Soft Lamellar Nanomaterial

Nanolayered lamellae are common structures in nanoscience and nanotechnology, but most are nearly symmetric in layer thickness. Here, we report on the structure and mechanics of highly asymmetric and thermodynamically stable soft–hard lamellar structures self-assembled from optimally designed PS 1 -(PI-b-PS 2 ) 3 miktoarm star block copolymers. The remarkable mechanical properties of these strong and ductile PS (polystyrene)-based nanomaterials can be tuned over a broad range by varying the hard layer thickness while maintaining the soft layer thickness constant at 13 nm. Upon deformation, thin PS lamellae (<100 nm) exhibited kinks and predamaged/damaged grains, as well as cavitation in the soft layers. In contrast, deformation of thick lamellae (>100 nm) manifests cavitation in both soft and hard nanolayers. In situ tensile-SAXS experiments revealed the evolution of cavities during deformation and confirmed that the damage in such systems reflects both plastic deformation by shear and residual cavities. The aspects of the mechanics should point to universal deformation behavior in broader classes of asymmetric hard–soft lamellar materials, whose properties are just being revealed for versatile applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ambiguous anti-fouling surfaces: Facile synthesis by light-mediated radical polymerization

In an attempt to create a polymer brush-based platform for the systematic study for anti-biofouling surfaces, the benefits of surface initiated, visible light-mediated radical polymerization are utilized to fabricate well-defined, chemically ambiguously patterned surfaces. A variety of analytical tools are used to illustrate the precise tuning of surface chemistry and thoroughly characterize spatially well-defined, hydrophilic/hydrophobic surfaces composed of poly(ethylene glycol methacrylate) and poly(trifluoroethyl methacrylate) with chemical definition on the micron scale. Advantages of both visible light-mediated photopolymerization and traditional copper-catalyzed atom transfer radical polymerization are combined to achieve both high spatial control and expanded monomer tolerance.

36 MATERIALS SCIENCE↗

Poly(dimethylsiloxane- b -methyl methacrylate): A Promising Candidate for Sub-10 nm Patterning

We report herein the modular synthesis and nanolithographic potential of poly(dimethylsiloxane-block-methyl methacrylate) (PDMS-b-PMMA) with self-assembled domains approaching sub-10 nm periods. A straightforward and modular coupling strategy, optimized for low molecular weight diblocks and using copper-catalyzed azide–alkyne “click” cycloaddition, was employed to obtain a library of PDMS-b-PMMA and poly(dimethylsiloxane-block-styrene) (PDMS-b-PS) diblock copolymers. Flory–Huggins interaction parameters, determined from small-angle X-ray scattering experiments, were high for PDMS-b-PMMA (χ ~ 0.2 at 150 °C), suggesting this diblock copolymer system has promise for sub-10 nm lithographic applications when compared to the corresponding PDMS-b-PS diblock copolymers (χ ~ 0.1 at 150 °C). Furthermore, performance evaluation in thin film self-assembly experiments allowed domain periods as small as 12.1 nm to be obtained, which is among the smallest highly ordered nanoscale patterns reported hitherto for thermally annealed materials.

36 MATERIALS SCIENCE↗

Synthetic strategy for preparing chiral double-semicrystalline polyether block copolymers

Here, we report an effective strategy for the synthesis of semi-crystalline block copolyethers with well-defined architecture and stereochemistry. As an exemplary system, triblock copolymers containing either atactic (racemic) or isotactic ( R or S ) poly(propylene oxide) end blocks with a central poly(ethylene oxide) mid-block were prepared by anionic ring-opening procedures. Stereochemical control was achieved by an initial hydrolytic kinetic resolution of racemic terminal epoxides followed by anionic ring-opening polymerization of the enantiopure monomer feedstock. The resultant triblock copolymers were highly isotactic (meso triads [ mm ]% ~ 90%) with optical microscopy, differential scanning calorimetry, wide angle x-ray scattering and small angle x-ray scattering being used to probe the impact of the isotacticity on the resultant polymer and hydrogel properties.

36 MATERIALS SCIENCE↗

Structural Evolution of Polyelectrolyte Complex Core Micelles and Ordered-Phase Bulk Materials

The kinetics of formation and structural evolution of novel polyelectrolyte complex materials formed by the assembly of water-soluble di- and triblock copolymers, with one neutral block and one (or two) cationic or anionic blocks, have been investigated. Comparison was made between the assembly of ABA and AB? copolymers in which A represents the ionic blocks and B and B' are the neutral poly(ethylene oxide) blocks. The degree of polymerization of B was twice that of B? and the ionic A blocks were of equal degrees of polymerization in all polymers. The mechanism and speed of the assembly process, and the organization of these domains, was probed using dynamic mechanical spectroscopy and small-angle X-ray scattering (SAXS). SAXS revealed that the equilibrium morphologies of both the diblock copolymer and the triblock copolymer materials were generally qualitatively the same with some apparent quantitative differences in phase boundaries, possibly attributable to lack of full equilibration. Slow kinetics and difficulties in reaching equilibrium phase structures, especially in triblock materials, is a principal message of this article. Detailed analysis of the SAXS data revealed that the triblock copolymer materials formed ordered phases via a nucleation and growth pathway and that the addition of small amounts (similar to 20%) of corresponding diblock copolymers increased the rate of structure formation and enhanced several key physical properties.

Krogstad, Daniel V.↗

Small Angle Neutron Scattering Study of Complex Coacervate Micelles and Hydrogels Formed from Ionic Diblock and Triblock Copolymers

A complex coacervate is a fluid phase that results from the electrostatic interactions between two oppositely charged macromolecules. The nature of the coacervate core structure of hydrogels and micelles formed from complexation between pairs of diblock or triblock copolymers containing oppositely charged end-blocks as a function of polymer and salt concentration was investigated. Both ABA triblock copolymers of poly[(allyl glycidyl ether)-b-(ethylene oxide)-b-(allyl glycidyl ether)] and analogous poly[(allyl glycidyl ether)-b-(ethylene oxide)] diblock copolymers, which were synthesized to be nearly one-half of the symmetrical triblock copolymers, were studied. The poly(allyl glycidyl ether) blocks were functionalized with either guanidinium or sulfonate groups via postpolymerization modification. Mixing of oppositely charged block copolymers resulted in the formation of nanometer-scale coacervate domains. Small angle neutron scattering (SANS) experiments were used to investigate the size and spacing of the coacervate domains. The SANS patterns were fit using a previously vetted, detailed model consisting of polydisperse core–shell micelles with a randomly distributed sphere or body-centered cubic (BCC) structure factor. For increasing polymer concentration, the size of the coacervate domains remained constant while the spatial extent of the poly(ethylene oxide) (PEO) corona decreased. However, increasing salt concentration resulted in a decrease in both the coacervate domain size and the corona size due to a combination of the electrostatic interactions being screened and the shrinkage of the neutral PEO blocks. Additionally, for the triblock copolymers that formed BCC ordered domains, the water content in the coacervate domains was calculated to increase from approximately 16.8% to 27.5% as the polymer concentration decreased from 20 to 15 wt %.

36 MATERIALS SCIENCE↗